From: Abel Vesa <abel.vesa@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
"vkoul@kernel.org" <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Johan Hovold <johan@kernel.org>
Subject: [PATCH v3 6/8] phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets
Date: Wed, 18 Jan 2023 02:53:26 +0200 [thread overview]
Message-ID: <20230118005328.2378792-7-abel.vesa@linaro.org> (raw)
In-Reply-To: <20230118005328.2378792-1-abel.vesa@linaro.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new qserdes TX RX PCIE specific offsets in a
dedicated header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
.../phy-qcom-qmp-qserdes-txrx-v6_20.h | 45 +++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 1 +
2 files changed, 46 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
new file mode 100644
index 000000000000..5385a8b60970
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_PCIE_V6_20_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_PCIE_V6_20_H_
+
+#define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_TX 0x30
+#define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_RX 0x34
+#define QSERDES_V6_20_TX_TRAN_DRVR_EMP_EN 0xac
+#define QSERDES_V6_20_TX_LANE_MODE_1 0x78
+#define QSERDES_V6_20_TX_LANE_MODE_2 0x7c
+#define QSERDES_V6_20_TX_LANE_MODE_3 0x80
+
+#define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_2 0x08
+#define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_3 0x0c
+#define QSERDES_V6_20_RX_UCDR_PI_CONTROLS 0x20
+#define QSERDES_V6_20_RX_UCDR_SO_ACC_DEFAULT_VAL_RATE3 0x34
+#define QSERDES_V6_20_RX_IVCM_CAL_CTRL2 0x9c
+#define QSERDES_V6_20_RX_IVCM_POSTCAL_OFFSET 0xa0
+#define QSERDES_V6_20_RX_DFE_3 0xb4
+#define QSERDES_V6_20_RX_VGA_CAL_MAN_VAL 0xe8
+#define QSERDES_V6_20_RX_GM_CAL 0x10c
+#define QSERDES_V6_20_RX_EQU_ADAPTOR_CNTRL4 0x120
+#define QSERDES_V6_20_RX_SIGDET_ENABLES 0x148
+#define QSERDES_V6_20_RX_PHPRE_CTRL 0x188
+#define QSERDES_V6_20_RX_DFE_CTLE_POST_CAL_OFFSET 0x194
+#define QSERDES_V6_20_RX_Q_PI_INTRINSIC_BIAS_RATE32 0x1dc
+#define QSERDES_V6_20_RX_MODE_RATE2_B0 0x1f4
+#define QSERDES_V6_20_RX_MODE_RATE2_B1 0x1f8
+#define QSERDES_V6_20_RX_MODE_RATE2_B2 0x1fc
+#define QSERDES_V6_20_RX_MODE_RATE2_B3 0x200
+#define QSERDES_V6_20_RX_MODE_RATE2_B4 0x204
+#define QSERDES_V6_20_RX_MODE_RATE2_B5 0x208
+#define QSERDES_V6_20_RX_MODE_RATE2_B6 0x20c
+#define QSERDES_V6_20_RX_MODE_RATE3_B0 0x210
+#define QSERDES_V6_20_RX_MODE_RATE3_B1 0x214
+#define QSERDES_V6_20_RX_MODE_RATE3_B2 0x218
+#define QSERDES_V6_20_RX_MODE_RATE3_B3 0x21c
+#define QSERDES_V6_20_RX_MODE_RATE3_B4 0x220
+#define QSERDES_V6_20_RX_MODE_RATE3_B5 0x224
+#define QSERDES_V6_20_RX_MODE_RATE3_B6 0x228
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 760de4c76e5b..e5974e6caf51 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -23,6 +23,7 @@
#include "phy-qcom-qmp-qserdes-com-v6.h"
#include "phy-qcom-qmp-qserdes-txrx-v6.h"
+#include "phy-qcom-qmp-qserdes-txrx-v6_20.h"
#include "phy-qcom-qmp-qserdes-pll.h"
--
2.34.1
next prev parent reply other threads:[~2023-01-18 1:06 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-18 0:53 [PATCH v3 0/8] phy: qualcomm: Add PCIe support for SM8550 Abel Vesa
2023-01-18 0:53 ` [PATCH v3 1/8] dt-bindings: phy: Add QMP PCIe PHY comptible " Abel Vesa
2023-01-18 16:36 ` Rob Herring
2023-01-18 16:45 ` Johan Hovold
2023-01-18 21:25 ` Abel Vesa
2023-01-19 7:40 ` Johan Hovold
2023-01-18 0:53 ` [PATCH v3 2/8] phy: qcom-qmp: pcs: Add v6 register offsets Abel Vesa
2023-01-18 4:20 ` Dmitry Baryshkov
2023-01-18 0:53 ` [PATCH v3 3/8] phy: qcom-qmp: pcs: Add v6.20 " Abel Vesa
2023-01-18 4:25 ` Dmitry Baryshkov
2023-01-18 0:53 ` [PATCH v3 4/8] phy: qcom-qmp: pcs-pcie: Add v6 " Abel Vesa
2023-01-18 4:25 ` Dmitry Baryshkov
2023-01-18 0:53 ` [PATCH v3 5/8] phy: qcom-qmp: pcs-pcie: Add v6.20 " Abel Vesa
2023-01-18 4:26 ` Dmitry Baryshkov
2023-01-18 0:53 ` Abel Vesa [this message]
2023-01-18 4:30 ` [PATCH v3 6/8] phy: qcom-qmp: qserdes-txrx: " Dmitry Baryshkov
2023-01-18 0:53 ` [PATCH v3 7/8] phy: qcom-qmp: qserdes-lane-shared: Add v6 " Abel Vesa
2023-01-18 0:53 ` [PATCH v3 8/8] phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs Abel Vesa
2023-01-18 4:34 ` Dmitry Baryshkov
2023-01-18 23:34 ` Abel Vesa
2023-01-19 13:07 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230118005328.2378792-7-abel.vesa@linaro.org \
--to=abel.vesa@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=johan@kernel.org \
--cc=kishon@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®