Re: [PATCH] usb: dwc3: fix extcon dependency

[Thinh Nguyen <Thinh.Nguyen@synopsys.com>]

On Wed, Jan 18, 2023, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
> 
> The dwc3 core support now links against the extcon subsystem,
> so it cannot be built-in when extcon is a loadable module:
> 
> arm-linux-gnueabi-ld: drivers/usb/dwc3/core.o: in function `dwc3_get_extcon':
> core.c:(.text+0x572): undefined reference to `extcon_get_edev_by_phandle'
> arm-linux-gnueabi-ld: core.c:(.text+0x596): undefined reference to `extcon_get_extcon_dev'
> arm-linux-gnueabi-ld: core.c:(.text+0x5ea): undefined reference to `extcon_find_edev_by_node'
> 
> There was already a Kconfig dependency in the dual-role support,
> but this is now needed for the entire dwc3 driver.
> 
> It is still possible to build dwc3 without extcon, but this
> prevents it from being set to built-in when extcon is a loadable
> module.
> 
> Fixes: d182c2e1bc92 ("usb: dwc3: Don't switch OTG -> peripheral if extcon is present")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
>  drivers/usb/dwc3/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
> index b2f72b0e75c6..be954a9abbe0 100644
> --- a/drivers/usb/dwc3/Kconfig
> +++ b/drivers/usb/dwc3/Kconfig
> @@ -3,6 +3,7 @@
>  config USB_DWC3
>  	tristate "DesignWare USB3 DRD Core Support"
>  	depends on (USB || USB_GADGET) && HAS_DMA
> +	depends on (EXTCON || EXTCON=n)
>  	select USB_XHCI_PLATFORM if USB_XHCI_HCD
>  	select USB_ROLE_SWITCH if USB_DWC3_DUAL_ROLE
>  	help
> @@ -44,7 +45,6 @@ config USB_DWC3_GADGET
>  config USB_DWC3_DUAL_ROLE
>  	bool "Dual Role mode"
>  	depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
> -	depends on (EXTCON=y || EXTCON=USB_DWC3)
>  	help
>  	  This is the default mode of working of DWC3 controller where
>  	  both host and gadget features are enabled.
> -- 
> 2.39.0
> 

Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

Thanks,
Thinh