From: arinc9.unal@gmail.com
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: "Arınç ÜNAL" <arinc.unal@arinc9.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
"Frank Wunderlich" <frank-w@public-files.de>,
erkin.bozoglu@xeront.com, "Sean Wang" <sean.wang@mediatek.com>,
"DENG Qingfang" <dqfext@gmail.com>
Subject: [PATCH v2 2/5] arm: dts: mt7623: add mt7530 switch to mt7623a.dtsi
Date: Wed, 1 Feb 2023 21:56:53 +0300 [thread overview]
Message-ID: <20230201185656.17164-3-arinc.unal@arinc9.com> (raw)
In-Reply-To: <20230201185656.17164-1-arinc.unal@arinc9.com>
From: Arınç ÜNAL <arinc.unal@arinc9.com>
The MT7530 switch is included as a part of the multi-chip module on the
MT7623AI SoC. Add it to mt7623a.dtsi and adjust DTs that call mt7623a.dtsi.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
arch/arm/boot/dts/mt7623a-rfb-emmc.dts | 87 +++++++-------------------
arch/arm/boot/dts/mt7623a-rfb-nand.dts | 87 +++++++-------------------
arch/arm/boot/dts/mt7623a.dtsi | 74 ++++++++++++++++++++++
3 files changed, 118 insertions(+), 130 deletions(-)
diff --git a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
index a64d68b6e165..5654284bab01 100644
--- a/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623a-rfb-emmc.dts
@@ -112,74 +112,31 @@ &crypto {
status = "okay";
};
-&gmac0 {
- status = "okay";
- phy-mode = "trgmii";
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan0";
+ };
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
- };
-};
+ port@1 {
+ status = "okay";
+ label = "lan1";
+ };
-ð {
- status = "okay";
+ port@2 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port@3 {
+ status = "okay";
+ label = "lan3";
+ };
- mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- switch@0 {
- compatible = "mediatek,mt7530";
- reg = <0>;
- mediatek,mcm;
- resets = <ðsys MT2701_ETHSYS_MCM_RST>;
- reset-names = "mcm";
- core-supply = <&mt6323_vpa_reg>;
- io-supply = <&mt6323_vemc3v3_reg>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- label = "lan0";
- };
-
- port@1 {
- reg = <1>;
- label = "lan1";
- };
-
- port@2 {
- reg = <2>;
- label = "lan2";
- };
-
- port@3 {
- reg = <3>;
- label = "lan3";
- };
-
- port@4 {
- reg = <4>;
- label = "wan";
- };
-
- port@6 {
- reg = <6>;
- label = "cpu";
- ethernet = <&gmac0>;
- phy-mode = "trgmii";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
+ port@4 {
+ status = "okay";
+ label = "wan";
};
};
};
diff --git a/arch/arm/boot/dts/mt7623a-rfb-nand.dts b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
index fac3ca0322c8..afd177b3b516 100644
--- a/arch/arm/boot/dts/mt7623a-rfb-nand.dts
+++ b/arch/arm/boot/dts/mt7623a-rfb-nand.dts
@@ -116,74 +116,31 @@ &crypto {
status = "okay";
};
-&gmac0 {
- status = "okay";
- phy-mode = "trgmii";
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan0";
+ };
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
- };
-};
+ port@1 {
+ status = "okay";
+ label = "lan1";
+ };
-ð {
- status = "okay";
+ port@2 {
+ status = "okay";
+ label = "lan2";
+ };
- mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- switch@0 {
- compatible = "mediatek,mt7530";
- reg = <0>;
- mediatek,mcm;
- resets = <ðsys MT2701_ETHSYS_MCM_RST>;
- reset-names = "mcm";
- core-supply = <&mt6323_vpa_reg>;
- io-supply = <&mt6323_vemc3v3_reg>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- label = "lan0";
- };
-
- port@1 {
- reg = <1>;
- label = "lan1";
- };
-
- port@2 {
- reg = <2>;
- label = "lan2";
- };
-
- port@3 {
- reg = <3>;
- label = "lan3";
- };
-
- port@4 {
- reg = <4>;
- label = "wan";
- };
-
- port@6 {
- reg = <6>;
- label = "cpu";
- ethernet = <&gmac0>;
- phy-mode = "trgmii";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
+ port@3 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port@4 {
+ status = "okay";
+ label = "wan";
};
};
};
diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi
index d304b62d24b5..fbb5731a3a53 100644
--- a/arch/arm/boot/dts/mt7623a.dtsi
+++ b/arch/arm/boot/dts/mt7623a.dtsi
@@ -17,8 +17,82 @@ &crypto {
power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
};
+&gmac0 {
+ status = "okay";
+ phy-mode = "trgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+};
+
ð {
+ status = "okay";
power-domains = <&scpsys MT7623A_POWER_DOMAIN_ETH>;
+
+ mdio: mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0: switch@0 {
+ compatible = "mediatek,mt7530";
+ reg = <0>;
+ mediatek,mcm;
+ resets = <ðsys MT2701_ETHSYS_MCM_RST>;
+ reset-names = "mcm";
+ core-supply = <&mt6323_vpa_reg>;
+ io-supply = <&mt6323_vemc3v3_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ status = "disabled";
+ reg = <0>;
+ label = "swp0";
+ };
+
+ port@1 {
+ status = "disabled";
+ reg = <1>;
+ label = "swp1";
+ };
+
+ port@2 {
+ status = "disabled";
+ reg = <2>;
+ label = "swp2";
+ };
+
+ port@3 {
+ status = "disabled";
+ reg = <3>;
+ label = "swp3";
+ };
+
+ port@4 {
+ status = "disabled";
+ reg = <4>;
+ label = "swp4";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "trgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+ };
};
&nandc {
--
2.37.2
next prev parent reply other threads:[~2023-02-01 18:57 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-01 18:56 [PATCH v2 0/5] arm: dts: mt7623: relocate gmacs, mt7530 switch, and mux phy arinc9.unal
2023-02-01 18:56 ` [PATCH v2 1/5] arm: dts: mt7623: add gmacs to mt7623.dtsi arinc9.unal
2023-02-01 18:56 ` arinc9.unal [this message]
2023-02-01 18:56 ` [PATCH v2 3/5] arm: dts: mt7623: change mt7530 switch address arinc9.unal
2023-02-01 18:56 ` [PATCH v2 4/5] arm: dts: mt7623: mux phy0 on Bananapi BPI-R2 arinc9.unal
2023-02-03 15:36 ` Frank Wunderlich
2023-02-03 18:20 ` Arınç ÜNAL
2023-02-03 18:54 ` Frank Wunderlich
2023-02-04 10:27 ` Aw: " Frank Wunderlich
2023-02-04 11:43 ` Frank Wunderlich
2023-02-04 12:12 ` Arınç ÜNAL
2023-02-04 13:07 ` Aw: " Frank Wunderlich
2023-02-04 15:50 ` Arınç ÜNAL
2023-02-08 18:47 ` Arınç ÜNAL
2023-02-01 18:56 ` [PATCH v2 5/5] arm: dts: mt7623: enable flow control on port@6 arinc9.unal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230201185656.17164-3-arinc.unal@arinc9.com \
--to=arinc9.unal@gmail.com \
--cc=arinc.unal@arinc9.com \
--cc=devicetree@vger.kernel.org \
--cc=dqfext@gmail.com \
--cc=erkin.bozoglu@xeront.com \
--cc=frank-w@public-files.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sean.wang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®