[PATCH 0/4] Tegra TPM driver with hw flow control

[Krishna Yarlagadda <kyarlagadda@nvidia.com>]

Tegra234 and Tegra241 chips have QSPI controller that supports TCG
PC Client Specific TPM Interface Specification (TIS) flow control.
Since the controller only supports half duplex, sw wait polling
(flow control using full duplex transfers) method implemented in
tpm_tis_spi_main.c does not suffice.
Added extended driver to disable sw flow control and send
all transfers in single message. Flow control is handled by hardware.

Krishna Yarlagadda (4):
  dt-bindings: tpm: Add compatible for Tegra TPM
  tpm: tegra: Support SPI tpm wait state detect
  spi: dt-bindings: Add Tegra TPM wait polling flag
  spi: tegra210-quad: Enable TPM wait polling

 .../security/tpm/nvidia,tegra-tpm-spi.txt     |  14 ++
 ...nvidia,tegra210-quad-peripheral-props.yaml |   6 +
 drivers/char/tpm/Makefile                     |   1 +
 drivers/char/tpm/tpm_tis_spi.h                |   1 +
 drivers/char/tpm/tpm_tis_spi_main.c           |   4 +-
 drivers/char/tpm/tpm_tis_spi_tegra.c          | 123 ++++++++++++++++++
 drivers/spi/spi-tegra210-quad.c               |  16 +++
 7 files changed, 164 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/security/tpm/nvidia,tegra-tpm-spi.txt
 create mode 100644 drivers/char/tpm/tpm_tis_spi_tegra.c

-- 
2.17.1