From: Gregory Price <gourry.memverge@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org, oleg@redhat.com, avagin@gmail.com,
peterz@infradead.org, luto@kernel.org, krisman@collabora.com,
tglx@linutronix.de, corbet@lwn.net, shuah@kernel.org,
Gregory Price <gregory.price@memverge.com>
Subject: [PATCH v9 1/1] ptrace,syscall_user_dispatch: checkpoint/restore support for SUD
Date: Fri, 10 Feb 2023 02:25:03 -0500 [thread overview]
Message-ID: <20230210072503.1808-2-gregory.price@memverge.com> (raw)
In-Reply-To: <20230210072503.1808-1-gregory.price@memverge.com>
Implement ptrace getter/setter interface for syscall user dispatch.
These prctl settings are presently write-only, making it impossible to
implement transparent checkpoint/restore via software like CRIU.
'on_dispatch' field is not exposed because it is a kernel-internal
only field that cannot be 'true' when returning to userland.
Signed-off-by: Gregory Price <gregory.price@memverge.com>
---
.../admin-guide/syscall-user-dispatch.rst | 5 +-
include/linux/syscall_user_dispatch.h | 18 +++++
include/uapi/linux/ptrace.h | 29 +++++++
kernel/entry/syscall_user_dispatch.c | 63 +++++++++++++--
kernel/ptrace.c | 9 +++
tools/testing/selftests/ptrace/.gitignore | 1 +
tools/testing/selftests/ptrace/Makefile | 2 +-
tools/testing/selftests/ptrace/get_set_sud.c | 80 +++++++++++++++++++
8 files changed, 197 insertions(+), 10 deletions(-)
create mode 100644 tools/testing/selftests/ptrace/get_set_sud.c
diff --git a/Documentation/admin-guide/syscall-user-dispatch.rst b/Documentation/admin-guide/syscall-user-dispatch.rst
index 60314953c728..a23ae21a1d5b 100644
--- a/Documentation/admin-guide/syscall-user-dispatch.rst
+++ b/Documentation/admin-guide/syscall-user-dispatch.rst
@@ -43,7 +43,10 @@ doesn't rely on any of the syscall ABI to make the filtering. It uses
only the syscall dispatcher address and the userspace key.
As the ABI of these intercepted syscalls is unknown to Linux, these
-syscalls are not instrumentable via ptrace or the syscall tracepoints.
+syscalls are not instrumentable via ptrace or the syscall tracepoints,
+however an interfaces to suspend, checkpoint, and restore syscall user
+dispatch configuration has been added to ptrace to assist userland
+checkpoint/restart software.
Interface
---------
diff --git a/include/linux/syscall_user_dispatch.h b/include/linux/syscall_user_dispatch.h
index a0ae443fb7df..641ca8880995 100644
--- a/include/linux/syscall_user_dispatch.h
+++ b/include/linux/syscall_user_dispatch.h
@@ -22,6 +22,12 @@ int set_syscall_user_dispatch(unsigned long mode, unsigned long offset,
#define clear_syscall_work_syscall_user_dispatch(tsk) \
clear_task_syscall_work(tsk, SYSCALL_USER_DISPATCH)
+int syscall_user_dispatch_get_config(struct task_struct *task, unsigned long size,
+ void __user *data);
+
+int syscall_user_dispatch_set_config(struct task_struct *task, unsigned long size,
+ void __user *data);
+
#else
struct syscall_user_dispatch {};
@@ -35,6 +41,18 @@ static inline void clear_syscall_work_syscall_user_dispatch(struct task_struct *
{
}
+static inline int syscall_user_dispatch_get_config(struct task_struct *task,
+ unsigned long size, void __user *data)
+{
+ return -EINVAL;
+}
+
+static inline int syscall_user_dispatch_set_config(struct task_struct *task,
+ unsigned long size, void __user *data)
+{
+ return -EINVAL;
+}
+
#endif /* CONFIG_GENERIC_ENTRY */
#endif /* _SYSCALL_USER_DISPATCH_H */
diff --git a/include/uapi/linux/ptrace.h b/include/uapi/linux/ptrace.h
index 195ae64a8c87..e79739e86a68 100644
--- a/include/uapi/linux/ptrace.h
+++ b/include/uapi/linux/ptrace.h
@@ -112,6 +112,35 @@ struct ptrace_rseq_configuration {
__u32 pad;
};
+#define PTRACE_SET_SYSCALL_USER_DISPATCH_CONFIG 0x4210
+#define PTRACE_GET_SYSCALL_USER_DISPATCH_CONFIG 0x4211
+
+/*
+ * struct ptrace_sud_config - Per-task configuration for SUD
+ * @mode: One of PR_SYS_DISPATCH_ON or PR_SYS_DISPATCH_OFF
+ * @selector: Tracee's user virtual address of SUD selector
+ * @offset: SUD exclusion area (virtual address)
+ * @len: Length of SUD exclusion area
+ *
+ * Used to get/set the syscall user dispatch configuration for tracee.
+ * process. Selector is optional (may be NULL), and if invalid will produce
+ * a SIGSEGV in the tracee upon first access.
+ *
+ * If mode is PR_SYS_DISPATCH_ON, syscall dispatch will be enabled. If
+ * PR_SYS_DISPATCH_OFF, syscall dispatch will be disabled and all other
+ * parameters must be 0. The value in *selector (if not null), also determines
+ * whether syscall dispatch will occur.
+ *
+ * The SUD Exclusion area described by offset/len is the virtual address space
+ * from which syscalls will not produce a user dispatch.
+ */
+struct ptrace_sud_config {
+ __u64 mode;
+ __s8 *selector;
+ __u64 offset;
+ __u64 len;
+};
+
/*
* These values are stored in task->ptrace_message
* by ptrace_stop to describe the current syscall-stop.
diff --git a/kernel/entry/syscall_user_dispatch.c b/kernel/entry/syscall_user_dispatch.c
index 0b6379adff6b..7fffcf1a53cb 100644
--- a/kernel/entry/syscall_user_dispatch.c
+++ b/kernel/entry/syscall_user_dispatch.c
@@ -4,6 +4,7 @@
*/
#include <linux/sched.h>
#include <linux/prctl.h>
+#include <linux/ptrace.h>
#include <linux/syscall_user_dispatch.h>
#include <linux/uaccess.h>
#include <linux/signal.h>
@@ -68,8 +69,9 @@ bool syscall_user_dispatch(struct pt_regs *regs)
return true;
}
-int set_syscall_user_dispatch(unsigned long mode, unsigned long offset,
- unsigned long len, char __user *selector)
+static int task_set_syscall_user_dispatch(struct task_struct *task, unsigned long mode,
+ unsigned long offset, unsigned long len,
+ char __user *selector)
{
switch (mode) {
case PR_SYS_DISPATCH_OFF:
@@ -94,15 +96,60 @@ int set_syscall_user_dispatch(unsigned long mode, unsigned long offset,
return -EINVAL;
}
- current->syscall_dispatch.selector = selector;
- current->syscall_dispatch.offset = offset;
- current->syscall_dispatch.len = len;
- current->syscall_dispatch.on_dispatch = false;
+ task->syscall_dispatch.selector = selector;
+ task->syscall_dispatch.offset = offset;
+ task->syscall_dispatch.len = len;
+ task->syscall_dispatch.on_dispatch = false;
if (mode == PR_SYS_DISPATCH_ON)
- set_syscall_work(SYSCALL_USER_DISPATCH);
+ set_task_syscall_work(task, SYSCALL_USER_DISPATCH);
else
- clear_syscall_work(SYSCALL_USER_DISPATCH);
+ clear_task_syscall_work(task, SYSCALL_USER_DISPATCH);
return 0;
}
+
+int set_syscall_user_dispatch(unsigned long mode, unsigned long offset,
+ unsigned long len, char __user *selector)
+{
+ return task_set_syscall_user_dispatch(current, mode, offset, len, selector);
+}
+
+int syscall_user_dispatch_get_config(struct task_struct *task, unsigned long size,
+ void __user *data)
+{
+ struct syscall_user_dispatch *sd = &task->syscall_dispatch;
+ struct ptrace_sud_config config;
+
+ if (size != sizeof(struct ptrace_sud_config))
+ return -EINVAL;
+
+ if (test_task_syscall_work(task, SYSCALL_USER_DISPATCH))
+ config.mode = PR_SYS_DISPATCH_ON;
+ else
+ config.mode = PR_SYS_DISPATCH_OFF;
+
+ config.offset = sd->offset;
+ config.len = sd->len;
+ config.selector = sd->selector;
+
+ if (copy_to_user(data, &config, sizeof(config)))
+ return -EFAULT;
+
+ return 0;
+}
+
+int syscall_user_dispatch_set_config(struct task_struct *task, unsigned long size,
+ void __user *data)
+{
+ struct ptrace_sud_config config;
+
+ if (size != sizeof(struct ptrace_sud_config))
+ return -EINVAL;
+
+ if (copy_from_user(&config, data, sizeof(config)))
+ return -EFAULT;
+
+ return task_set_syscall_user_dispatch(task, config.mode, config.offset,
+ config.len, config.selector);
+}
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 54482193e1ed..d99376532b56 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -32,6 +32,7 @@
#include <linux/compat.h>
#include <linux/sched/signal.h>
#include <linux/minmax.h>
+#include <linux/syscall_user_dispatch.h>
#include <asm/syscall.h> /* for syscall_get_* */
@@ -1259,6 +1260,14 @@ int ptrace_request(struct task_struct *child, long request,
break;
#endif
+ case PTRACE_SET_SYSCALL_USER_DISPATCH_CONFIG:
+ ret = syscall_user_dispatch_set_config(child, addr, datavp);
+ break;
+
+ case PTRACE_GET_SYSCALL_USER_DISPATCH_CONFIG:
+ ret = syscall_user_dispatch_get_config(child, addr, datavp);
+ break;
+
default:
break;
}
diff --git a/tools/testing/selftests/ptrace/.gitignore b/tools/testing/selftests/ptrace/.gitignore
index 792318aaa30c..b7dde152e75a 100644
--- a/tools/testing/selftests/ptrace/.gitignore
+++ b/tools/testing/selftests/ptrace/.gitignore
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
get_syscall_info
+get_set_sud
peeksiginfo
vmaccess
diff --git a/tools/testing/selftests/ptrace/Makefile b/tools/testing/selftests/ptrace/Makefile
index 2f1f532c39db..33a36b73bcb9 100644
--- a/tools/testing/selftests/ptrace/Makefile
+++ b/tools/testing/selftests/ptrace/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0-only
CFLAGS += -std=c99 -pthread -iquote../../../../include/uapi -Wall
-TEST_GEN_PROGS := get_syscall_info peeksiginfo vmaccess
+TEST_GEN_PROGS := get_syscall_info peeksiginfo vmaccess get_set_sud
include ../lib.mk
diff --git a/tools/testing/selftests/ptrace/get_set_sud.c b/tools/testing/selftests/ptrace/get_set_sud.c
new file mode 100644
index 000000000000..b22ab35cbca7
--- /dev/null
+++ b/tools/testing/selftests/ptrace/get_set_sud.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0
+#define _GNU_SOURCE
+#include "../kselftest_harness.h"
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <sys/wait.h>
+#include <sys/syscall.h>
+#include <sys/prctl.h>
+
+#include "linux/ptrace.h"
+
+static int sys_ptrace(int request, pid_t pid, void *addr, void *data)
+{
+ return syscall(SYS_ptrace, request, pid, addr, data);
+}
+
+TEST(get_set_sud)
+{
+ struct ptrace_sud_config config;
+ pid_t child;
+ int ret = 0;
+ int status;
+
+ child = fork();
+ ASSERT_GE(child, 0);
+ if (child == 0) {
+ ASSERT_EQ(0, sys_ptrace(PTRACE_TRACEME, 0, 0, 0)) {
+ TH_LOG("PTRACE_TRACEME: %m");
+ }
+ kill(getpid(), SIGSTOP);
+ sleep(2);
+ _exit(1);
+ }
+
+ waitpid(child, &status, 0);
+
+ config.mode = PR_SYS_DISPATCH_ON;
+ config.selector = (void*)0xDEADBEEF;
+ config.offset = 0x12345678;
+ config.len = 0x87654321;
+
+ ret = sys_ptrace(PTRACE_GET_SYSCALL_USER_DISPATCH_CONFIG, child,
+ (void*)sizeof(config), &config);
+ if (ret < 0) {
+ ASSERT_EQ(errno, EIO);
+ goto leave;
+ }
+
+ ASSERT_EQ(ret, 0);
+ ASSERT_EQ(config.mode, PR_SYS_DISPATCH_OFF);
+ ASSERT_EQ(config.selector, (void*)NULL);
+ ASSERT_EQ(config.offset, 0);
+ ASSERT_EQ(config.len, 0);
+
+ config.mode = PR_SYS_DISPATCH_ON;
+ config.selector = (void*)NULL;
+ config.offset = 0x400000;
+ config.len = 0x1000;
+
+ ret = sys_ptrace(PTRACE_SET_SYSCALL_USER_DISPATCH_CONFIG, child,
+ (void*)sizeof(config), &config);
+
+ ASSERT_EQ(ret, 0);
+
+ memset(&config, 1, sizeof(config));
+ ret = sys_ptrace(PTRACE_GET_SYSCALL_USER_DISPATCH_CONFIG, child,
+ (void*)sizeof(config), &config);
+
+ ASSERT_EQ(ret, 0);
+ ASSERT_EQ(config.mode, PR_SYS_DISPATCH_ON);
+ ASSERT_EQ(config.selector, (void*)NULL);
+ ASSERT_EQ(config.offset, 0x400000);
+ ASSERT_EQ(config.len, 0x1000);
+
+leave:
+ kill(child, SIGKILL);
+}
+
+TEST_HARNESS_MAIN
--
2.39.1
next prev parent reply other threads:[~2023-02-10 7:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-10 7:25 [PATCH v9 0/1] Checkpoint Support for Syscall User Dispatch Gregory Price
2023-02-10 7:25 ` Gregory Price [this message]
2023-02-13 20:26 ` [PATCH v9 1/1] ptrace,syscall_user_dispatch: checkpoint/restore support for SUD Thomas Gleixner
2023-02-13 21:00 ` Gregory Price
2023-02-14 0:00 ` Gregory Price
2023-02-16 13:33 ` Oleg Nesterov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230210072503.1808-2-gregory.price@memverge.com \
--to=gourry.memverge@gmail.com \
--cc=avagin@gmail.com \
--cc=corbet@lwn.net \
--cc=gregory.price@memverge.com \
--cc=krisman@collabora.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@kernel.org \
--cc=oleg@redhat.com \
--cc=peterz@infradead.org \
--cc=shuah@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®