mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Steven Rostedt <rostedt@goodmis.org>
To: linux-kernel@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	Daniel Bristot de Oliveira <bristot@kernel.org>,
	Bagas Sanjaya <bagasdotme@gmail.com>,
	Juri Lelli <juri.lelli@redhat.com>,
	Clark Williams <williams@redhat.com>,
	Jonathan Corbet <corbet@lwn.net>
Subject: [for-next][PATCH 8/8] Documentation/rtla: Add hwnoise man page
Date: Sat, 18 Feb 2023 15:18:29 -0500	[thread overview]
Message-ID: <20230218201933.431917261@goodmis.org> (raw)
In-Reply-To: <20230218201821.938318263@goodmis.org>

From: Daniel Bristot de Oliveira <bristot@kernel.org>

Add a man page for the new rtla hwnoise tool, mostly based in the
rtla osnoise top.

Link: https://lkml.kernel.org/r/27088e0f42a6129e9b75f789d78adff4171f2e79.1675805361.git.bristot@kernel.org

Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
---
 Documentation/tools/rtla/index.rst        |   1 +
 Documentation/tools/rtla/rtla-hwnoise.rst | 107 ++++++++++++++++++++++
 2 files changed, 108 insertions(+)
 create mode 100644 Documentation/tools/rtla/rtla-hwnoise.rst

diff --git a/Documentation/tools/rtla/index.rst b/Documentation/tools/rtla/index.rst
index 840f0bf3e803..05d2652e4072 100644
--- a/Documentation/tools/rtla/index.rst
+++ b/Documentation/tools/rtla/index.rst
@@ -17,6 +17,7 @@ behavior on specific hardware.
    rtla-timerlat
    rtla-timerlat-hist
    rtla-timerlat-top
+   rtla-hwnoise
 
 .. only::  subproject and html
 
diff --git a/Documentation/tools/rtla/rtla-hwnoise.rst b/Documentation/tools/rtla/rtla-hwnoise.rst
new file mode 100644
index 000000000000..fb1c52bbc00b
--- /dev/null
+++ b/Documentation/tools/rtla/rtla-hwnoise.rst
@@ -0,0 +1,107 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============
+rtla-hwnoise
+============
+------------------------------------------
+Detect and quantify hardware-related noise
+------------------------------------------
+
+:Manual section: 1
+
+SYNOPSIS
+========
+
+**rtla hwnoise** [*OPTIONS*]
+
+DESCRIPTION
+===========
+
+**rtla hwnoise** collects the periodic summary from the *osnoise* tracer
+running with *interrupts disabled*. By disabling interrupts, and the scheduling
+of threads as a consequence, only non-maskable interrupts and hardware-related
+noise is allowed.
+
+The tool also allows the configurations of the *osnoise* tracer and the
+collection of the tracer output.
+
+OPTIONS
+=======
+.. include:: common_osnoise_options.rst
+
+.. include:: common_top_options.rst
+
+.. include:: common_options.rst
+
+EXAMPLE
+=======
+In the example below, the **rtla hwnoise** tool is set to run on CPUs *1-7*
+on a system with 8 cores/16 threads with hyper-threading enabled.
+
+The tool is set to detect any noise higher than *one microsecond*,
+to run for *ten minutes*, displaying a summary of the report at the
+end of the session::
+
+  # rtla hwnoise -c 1-7 -T 1 -d 10m -q
+                                          Hardware-related Noise
+  duration:   0 00:10:00 | time is in us
+  CPU Period       Runtime        Noise  % CPU Aval   Max Noise   Max Single          HW          NMI
+    1 #599       599000000          138    99.99997           3            3           4           74
+    2 #599       599000000           85    99.99998           3            3           4           75
+    3 #599       599000000           86    99.99998           4            3           6           75
+    4 #599       599000000           81    99.99998           4            4           2           75
+    5 #599       599000000           85    99.99998           2            2           2           75
+    6 #599       599000000           76    99.99998           2            2           0           75
+    7 #599       599000000           77    99.99998           3            3           0           75
+
+
+The first column shows the *CPU*, and the second column shows how many
+*Periods* the tool ran during the session. The *Runtime* is the time
+the tool effectively runs on the CPU. The *Noise* column is the sum of
+all noise that the tool observed, and the *% CPU Aval* is the relation
+between the *Runtime* and *Noise*.
+
+The *Max Noise* column is the maximum hardware noise the tool detected in a
+single period, and the *Max Single* is the maximum single noise seen.
+
+The *HW* and *NMI* columns show the total number of *hardware* and *NMI* noise
+occurrence observed by the tool.
+
+For example, *CPU 3* ran *599* periods of *1 second Runtime*. The CPU received
+*86 us* of noise during the entire execution, leaving *99.99997 %* of CPU time
+for the application. In the worst single period, the CPU caused *4 us* of
+noise to the application, but it was certainly caused by more than one single
+noise, as the *Max Single* noise was of *3 us*. The CPU has *HW noise,* at a
+rate of *six occurrences*/*ten minutes*. The CPU also has *NMIs*, at a higher
+frequency: around *seven per second*.
+
+The tool should report *0* hardware-related noise in the ideal situation.
+For example, by disabling hyper-threading to remove the hardware noise,
+and disabling the TSC watchdog to remove the NMI (it is possible to identify
+this using tracing options of **rtla hwnoise**), it was possible to reach
+the ideal situation in the same hardware::
+
+  # rtla hwnoise -c 1-7 -T 1 -d 10m -q
+                                          Hardware-related Noise
+  duration:   0 00:10:00 | time is in us
+  CPU Period       Runtime        Noise  % CPU Aval   Max Noise   Max Single          HW          NMI
+    1 #599       599000000            0   100.00000           0            0           0            0
+    2 #599       599000000            0   100.00000           0            0           0            0
+    3 #599       599000000            0   100.00000           0            0           0            0
+    4 #599       599000000            0   100.00000           0            0           0            0
+    5 #599       599000000            0   100.00000           0            0           0            0
+    6 #599       599000000            0   100.00000           0            0           0            0
+    7 #599       599000000            0   100.00000           0            0           0            0
+
+SEE ALSO
+========
+
+**rtla-osnoise**\(1)
+
+Osnoise tracer documentation: <https://www.kernel.org/doc/html/latest/trace/osnoise-tracer.html>
+
+AUTHOR
+======
+Written by Daniel Bristot de Oliveira <bristot@kernel.org>
+
+.. include:: common_appendix.rst
-- 
2.39.1

      parent reply	other threads:[~2023-02-18 20:19 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-18 20:18 [for-next][PATCH 0/8] tracing/tools: Updates for 6.3 Steven Rostedt
2023-02-18 20:18 ` [for-next][PATCH 1/8] tools/rv: Remove unneeded semicolon Steven Rostedt
2023-02-18 20:18 ` [for-next][PATCH 2/8] tools/tracing/rtla: osnoise_hist: use total duration for average calculation Steven Rostedt
2023-02-18 20:18 ` [for-next][PATCH 3/8] tools/tracing/rtla: osnoise_hist: display average with two-digit precision Steven Rostedt
2023-02-18 20:18 ` [for-next][PATCH 4/8] rtla/timerlat: Add auto-analysis core Steven Rostedt
2023-02-18 20:18 ` [for-next][PATCH 5/8] rtla/timerlat: Add auto-analysis support to timerlat top Steven Rostedt
2023-02-18 20:18 ` [for-next][PATCH 6/8] Documentation/rtla: Add timerlat-top auto-analysis options Steven Rostedt
2023-02-18 20:18 ` [for-next][PATCH 7/8] rtla: Add hwnoise tool Steven Rostedt
2023-02-18 20:18 ` Steven Rostedt [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230218201933.431917261@goodmis.org \
    --to=rostedt@goodmis.org \
    --cc=akpm@linux-foundation.org \
    --cc=bagasdotme@gmail.com \
    --cc=bristot@kernel.org \
    --cc=corbet@lwn.net \
    --cc=juri.lelli@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mhiramat@kernel.org \
    --cc=williams@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®