[PATCH] serial: jsm: fix style issues

[Mohammad Mahfooz <mohammadmahfoozpersonal@gmail.com>]

Use min_t instead of min to improve type safety.

While at it, replace neo_parse_modem (hard-coded function name) with __func__.

Also fix minor styling issues, like removing redundant return statement in void function.

Signed-off-by: Mohammad Mahfooz <mohammadmahfoozpersonal@gmail.com>
---
 drivers/tty/serial/jsm/jsm_neo.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c
index 0c78f66276cd..d4451fe06d99 100644
--- a/drivers/tty/serial/jsm/jsm_neo.c
+++ b/drivers/tty/serial/jsm/jsm_neo.c
@@ -29,7 +29,7 @@ static u32 jsm_offset_table[8] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x8
  */
 static inline void neo_pci_posting_flush(struct jsm_board *bd)
 {
-      readb(bd->re_map_membase + 0x8D);
+     readb(bd->re_map_membase + 0x8D);
 }
 
 static void neo_set_cts_flow_control(struct jsm_channel *ch)
@@ -350,7 +350,7 @@ static void neo_copy_data_from_uart_to_queue(struct jsm_channel *ch)
 		 * IBM pSeries platform.
 		 * 15 bytes max appears to be the magic number.
 		 */
-		n = min((u32) n, (u32) 12);
+		n = min_t(u32, n, 12);
 
 		/*
 		 * Since we are grabbing the linestatus register, which
@@ -433,7 +433,7 @@ static void neo_copy_data_from_uart_to_queue(struct jsm_channel *ch)
 		/*
 		 * If our queue is full, we have no choice but to drop some data.
 		 * The assumption is that HWFLOW or SWFLOW should have stopped
-		 * things way way before we got to this point.
+		 * things way before we got to this point.
 		 *
 		 * I decided that I wanted to ditch the oldest data first,
 		 * I hope thats okay with everyone? Yes? Good.
@@ -560,8 +560,8 @@ static void neo_parse_modem(struct jsm_channel *ch, u8 signals)
 	u8 msignals = signals;
 
 	jsm_dbg(MSIGS, &ch->ch_bd->pci_dev,
-		"neo_parse_modem: port: %d msignals: %x\n",
-		ch->ch_portnum, msignals);
+	"%s: port: %d msignals: %x\n",
+	__func__, ch->ch_portnum, msignals);
 
 	/* Scrub off lower bits. They signify delta's, which I don't care about */
 	/* Keep DDCD and DDSR though */
@@ -592,7 +592,7 @@ static void neo_parse_modem(struct jsm_channel *ch, u8 signals)
 		ch->ch_mistat &= ~UART_MSR_CTS;
 
 	jsm_dbg(MSIGS, &ch->ch_bd->pci_dev,
-		"Port: %d DTR: %d RTS: %d CTS: %d DSR: %d " "RI: %d CD: %d\n",
+		"Port: %d DTR: %d RTS: %d CTS: %d DSR: %d RI: %d CD: %d\n",
 		ch->ch_portnum,
 		!!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_DTR),
 		!!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_RTS),
@@ -770,9 +770,9 @@ static void neo_parse_isr(struct jsm_board *brd, u32 port)
 			spin_lock_irqsave(&ch->ch_lock, lock_flags);
 			if (cause == UART_17158_XON_DETECT) {
 				/* Is output stopped right now, if so, resume it */
-				if (brd->channels[port]->ch_flags & CH_STOP) {
+				if (brd->channels[port]->ch_flags & CH_STOP)
 					ch->ch_flags &= ~(CH_STOP);
-				}
+
 				jsm_dbg(INTR, &ch->ch_bd->pci_dev,
 					"Port %d. XON detected in incoming data\n",
 					port);
@@ -1067,7 +1067,6 @@ static void neo_param(struct jsm_channel *ch)
 
 	/* Get current status of the modem signals now */
 	neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr));
-	return;
 }
 
 /*
@@ -1147,7 +1146,7 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)
 		case UART_17158_RXRDY_TIMEOUT:
 			/*
 			 * RXRDY Time-out is cleared by reading data in the
-			* RX FIFO until it falls below the trigger level.
+			 * RX FIFO until it falls below the trigger level.
 			 */
 
 			/* Verify the port is in range. */
-- 
2.34.1