From: Ravi Gunasekaran <r-gunasekaran@ti.com>
To: <nm@ti.com>, <afd@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<s-vadapalli@ti.com>, <vaishnav.a@ti.com>, <r-gunasekaran@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v11 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI
Date: Fri, 24 Feb 2023 15:54:33 +0530 [thread overview]
Message-ID: <20230224102438.6541-4-r-gunasekaran@ti.com> (raw)
In-Reply-To: <20230224102438.6541-1-r-gunasekaran@ti.com>
From: Aswath Govindraju <a-govindraju@ti.com>
Add support for two instance of OSPI in J721S2 SoC.
Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
---
Changes from v10:
* Documented the reason for disabling the nodes by default.
* Removed Link tag from commmit message
Changes from v9:
* Disabled fss, ospi nodes by default in common DT file
Changes from v8:
* Updated "ranges" property to fix dtbs warnings
Changes from v7:
* Removed "reg" property from syscon node
* Renamed the "syscon" node to "bus" to after change in
compatible property
Changes from v6:
* Fixed the syscon node's compatible property
Changes from v5:
* Updated the syscon node's compatible property
* Removed Cc tags from commit message
Changes from v4:
* No change
Changes from v3:
* No change
Changes from v2:
* No change
Changes from v1:
* No change
.../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 62 +++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 0af242aa9816..5005a3ebbd34 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -306,4 +306,66 @@
ti,cpts-periodic-outputs = <2>;
};
};
+
+ fss: bus@47000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+ <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
+ <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+
+ /*
+ * Disable the node by default in the common include file.
+ * And enable it in the board specific DT file where the
+ * pinmux property is added.
+ */
+ status = "disabled";
+
+ ospi0: spi@47040000 {
+ compatible = "ti,am654-ospi", "cdns,qspi-nor";
+ reg = <0x00 0x47040000 0x00 0x100>,
+ <0x05 0x00000000 0x01 0x00000000>;
+ interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+ cdns,fifo-depth = <256>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x0>;
+ clocks = <&k3_clks 109 5>;
+ assigned-clocks = <&k3_clks 109 5>;
+ assigned-clock-parents = <&k3_clks 109 7>;
+ assigned-clock-rates = <166666666>;
+ power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Disable the node by default in the common include
+ * file. And enable it in the board specific DT file
+ * where the pinmux property is added.
+ */
+ status = "disabled";
+ };
+
+ ospi1: spi@47050000 {
+ compatible = "ti,am654-ospi", "cdns,qspi-nor";
+ reg = <0x00 0x47050000 0x00 0x100>,
+ <0x07 0x00000000 0x01 0x00000000>;
+ interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
+ cdns,fifo-depth = <256>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x0>;
+ clocks = <&k3_clks 110 5>;
+ power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /*
+ * Disable the node by default in the common include
+ * file. And enable it in the board specific DT file
+ * where the pinmux property is added.
+ */
+ status = "disabled";
+ };
+
+ };
};
--
2.17.1
next prev parent reply other threads:[~2023-02-24 10:36 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-24 10:24 [PATCH v11 0/8] arm64: j721s2: Add support for additional IPs Ravi Gunasekaran
2023-02-24 10:24 ` [PATCH v11 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB Ravi Gunasekaran
2023-02-24 10:24 ` [PATCH v11 2/8] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node Ravi Gunasekaran
2023-02-24 10:24 ` Ravi Gunasekaran [this message]
2023-02-24 11:09 ` [PATCH v11 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI Krzysztof Kozlowski
2023-02-27 8:31 ` [EXTERNAL] " Ravi Gunasekaran
2023-02-24 10:24 ` [PATCH v11 4/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0 Ravi Gunasekaran
2023-02-24 10:24 ` [PATCH v11 5/8] arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support Ravi Gunasekaran
2023-02-24 10:24 ` [PATCH v11 6/8] arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes Ravi Gunasekaran
2023-02-24 11:11 ` Krzysztof Kozlowski
2023-02-27 8:35 ` Ravi Gunasekaran
2023-02-24 10:24 ` [PATCH v11 7/8] arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node Ravi Gunasekaran
2023-02-24 10:24 ` [PATCH v11 8/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe Ravi Gunasekaran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230224102438.6541-4-r-gunasekaran@ti.com \
--to=r-gunasekaran@ti.com \
--cc=afd@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=s-vadapalli@ti.com \
--cc=vaishnav.a@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®