From: "Köry Maincent" <kory.maincent@bootlin.com>
To: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
linux-omap@vger.kernel.org
Cc: Michael Walle <michael@walle.cc>,
Richard Cochran <richardcochran@gmail.com>,
Kory Maincent <kory.maincent@bootlin.com>,
thomas.petazzoni@bootlin.com, Jay Vosburgh <j.vosburgh@gmail.com>,
Veaceslav Falico <vfalico@gmail.com>,
Andy Gospodarek <andy@greyhouse.net>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Joakim Zhang <qiangqing.zhang@nxp.com>,
Vladimir Oltean <vladimir.oltean@nxp.com>,
Claudiu Manoil <claudiu.manoil@nxp.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
UNGLinuxDriver@microchip.com,
Grygorii Strashko <grygorii.strashko@ti.com>,
Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Minghao Chi <chi.minghao@zte.com.cn>,
Guangbin Huang <huangguangbin2@huawei.com>,
Jie Wang <wangjie125@huawei.com>,
Wolfram Sang <wsa+renesas@sang-engineering.com>,
Wang Yufen <wangyufen@huawei.com>,
Alexandru Tachici <alexandru.tachici@analog.com>
Subject: [PATCH v2 4/4] net: fix up drivers WRT phy time stamping
Date: Fri, 3 Mar 2023 17:42:41 +0100 [thread overview]
Message-ID: <20230303164248.499286-5-kory.maincent@bootlin.com> (raw)
In-Reply-To: <20230303164248.499286-1-kory.maincent@bootlin.com>
From: Richard Cochran <richardcochran@gmail.com>
For "git bisect" correctness, this patch should be squashed in to the
previous one, but it is broken out here for the purpose of review.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
---
drivers/net/ethernet/freescale/fec_main.c | 23 +++++++++-----------
drivers/net/ethernet/mscc/ocelot_net.c | 21 +++++++++---------
drivers/net/ethernet/ti/cpsw_priv.c | 12 +++++------
drivers/net/ethernet/ti/netcp_ethss.c | 26 +++++------------------
4 files changed, 31 insertions(+), 51 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index f250b0df27fb..b98119551e6a 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -3058,22 +3058,19 @@ static int fec_enet_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
if (!netif_running(ndev))
return -EINVAL;
+ switch (cmd) {
+ case SIOCSHWTSTAMP:
+ return fep->bufdesc_ex ? fec_ptp_set(ndev, rq) :
+ -EOPNOTSUPP;
+
+ case SIOCGHWTSTAMP:
+ return fep->bufdesc_ex ? fec_ptp_get(ndev, rq) :
+ -EOPNOTSUPP;
+ }
+
if (!phydev)
return -ENODEV;
- if (fep->bufdesc_ex) {
- bool use_fec_hwts = !phy_has_hwtstamp(phydev);
-
- if (cmd == SIOCSHWTSTAMP) {
- if (use_fec_hwts)
- return fec_ptp_set(ndev, rq);
- fec_ptp_disable_hwts(ndev);
- } else if (cmd == SIOCGHWTSTAMP) {
- if (use_fec_hwts)
- return fec_ptp_get(ndev, rq);
- }
- }
-
return phy_mii_ioctl(phydev, rq, cmd);
}
diff --git a/drivers/net/ethernet/mscc/ocelot_net.c b/drivers/net/ethernet/mscc/ocelot_net.c
index 50858cc10fef..8c37db28a93d 100644
--- a/drivers/net/ethernet/mscc/ocelot_net.c
+++ b/drivers/net/ethernet/mscc/ocelot_net.c
@@ -882,18 +882,19 @@ static int ocelot_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
struct ocelot *ocelot = priv->port.ocelot;
int port = priv->port.index;
- /* If the attached PHY device isn't capable of timestamping operations,
- * use our own (when possible).
- */
- if (!phy_has_hwtstamp(dev->phydev) && ocelot->ptp) {
- switch (cmd) {
- case SIOCSHWTSTAMP:
- return ocelot_hwstamp_set(ocelot, port, ifr);
- case SIOCGHWTSTAMP:
- return ocelot_hwstamp_get(ocelot, port, ifr);
- }
+ switch (cmd) {
+ case SIOCSHWTSTAMP:
+ return ocelot->ptp ? ocelot_hwstamp_set(ocelot, port, ifr) :
+ -EOPNOTSUPP;
+
+ case SIOCGHWTSTAMP:
+ return ocelot->ptp ? ocelot_hwstamp_get(ocelot, port, ifr) :
+ -EOPNOTSUPP;
}
+ if (!dev->phydev)
+ return -ENODEV;
+
return phy_mii_ioctl(dev->phydev, ifr, cmd);
}
diff --git a/drivers/net/ethernet/ti/cpsw_priv.c b/drivers/net/ethernet/ti/cpsw_priv.c
index 758295c898ac..b15b83bb269a 100644
--- a/drivers/net/ethernet/ti/cpsw_priv.c
+++ b/drivers/net/ethernet/ti/cpsw_priv.c
@@ -714,13 +714,11 @@ int cpsw_ndo_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
phy = cpsw->slaves[slave_no].phy;
- if (!phy_has_hwtstamp(phy)) {
- switch (cmd) {
- case SIOCSHWTSTAMP:
- return cpsw_hwtstamp_set(dev, req);
- case SIOCGHWTSTAMP:
- return cpsw_hwtstamp_get(dev, req);
- }
+ switch (cmd) {
+ case SIOCSHWTSTAMP:
+ return cpsw_hwtstamp_set(dev, req);
+ case SIOCGHWTSTAMP:
+ return cpsw_hwtstamp_get(dev, req);
}
if (phy)
diff --git a/drivers/net/ethernet/ti/netcp_ethss.c b/drivers/net/ethernet/ti/netcp_ethss.c
index 751fb0bc65c5..36ce80f8bd6b 100644
--- a/drivers/net/ethernet/ti/netcp_ethss.c
+++ b/drivers/net/ethernet/ti/netcp_ethss.c
@@ -2557,15 +2557,6 @@ static int gbe_txtstamp_mark_pkt(struct gbe_intf *gbe_intf,
!gbe_dev->tx_ts_enabled)
return 0;
- /* If phy has the txtstamp api, assume it will do it.
- * We mark it here because skb_tx_timestamp() is called
- * after all the txhooks are called.
- */
- if (phy_has_txtstamp(phydev)) {
- skb_shinfo(p_info->skb)->tx_flags |= SKBTX_IN_PROGRESS;
- return 0;
- }
-
if (gbe_need_txtstamp(gbe_intf, p_info)) {
p_info->txtstamp = gbe_txtstamp;
p_info->ts_context = (void *)gbe_intf;
@@ -2583,11 +2574,6 @@ static int gbe_rxtstamp(struct gbe_intf *gbe_intf, struct netcp_packet *p_info)
if (p_info->rxtstamp_complete)
return 0;
- if (phy_has_rxtstamp(phydev)) {
- p_info->rxtstamp_complete = true;
- return 0;
- }
-
if (gbe_dev->rx_ts_enabled)
cpts_rx_timestamp(gbe_dev->cpts, p_info->skb);
@@ -2821,13 +2807,11 @@ static int gbe_ioctl(void *intf_priv, struct ifreq *req, int cmd)
struct gbe_intf *gbe_intf = intf_priv;
struct phy_device *phy = gbe_intf->slave->phy;
- if (!phy_has_hwtstamp(phy)) {
- switch (cmd) {
- case SIOCGHWTSTAMP:
- return gbe_hwtstamp_get(gbe_intf, req);
- case SIOCSHWTSTAMP:
- return gbe_hwtstamp_set(gbe_intf, req);
- }
+ switch (cmd) {
+ case SIOCGHWTSTAMP:
+ return gbe_hwtstamp_get(gbe_intf, req);
+ case SIOCSHWTSTAMP:
+ return gbe_hwtstamp_set(gbe_intf, req);
}
if (phy)
--
2.25.1
next prev parent reply other threads:[~2023-03-03 16:43 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-03 16:42 [PATCH v2 0/4] Up until now, there was no way to let the user select the layer at which time stamping occurs. The stack assumed that PHY time stamping is always preferred, but some MAC/PHY combinations were buggy Köry Maincent
2023-03-03 16:42 ` [PATCH v2 1/4] net: ethtool: Refactor identical get_ts_info implementations Köry Maincent
2023-03-03 16:42 ` [PATCH v2 2/4] net: Expose available time stamping layers to user space Köry Maincent
2023-03-03 18:13 ` kernel test robot
2023-03-03 23:52 ` Jakub Kicinski
2023-03-03 23:56 ` Willem de Bruijn
2023-03-03 16:42 ` [PATCH v2 3/4] net: Let the active time stamping layer be selectable Köry Maincent
2023-03-03 18:54 ` kernel test robot
2023-03-03 23:59 ` Willem de Bruijn
2023-03-04 15:04 ` Andrew Lunn
2023-03-04 3:06 ` kernel test robot
2023-03-04 15:43 ` Andrew Lunn
2023-03-04 16:16 ` Russell King (Oracle)
2023-03-04 19:46 ` Andrew Lunn
2023-03-06 17:55 ` Jakub Kicinski
2023-03-03 16:42 ` Köry Maincent [this message]
2023-03-03 16:45 ` [PATCH v2 0/4] Up until now, there was no way to let the user select the layer at which time stamping occurs. The stack assumed that PHY time stamping is always preferred, but some MAC/PHY combinations were buggy Köry Maincent
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230303164248.499286-5-kory.maincent@bootlin.com \
--to=kory.maincent@bootlin.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=alexandru.tachici@analog.com \
--cc=andrew@lunn.ch \
--cc=andy@greyhouse.net \
--cc=chi.minghao@zte.com.cn \
--cc=claudiu.manoil@nxp.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=grygorii.strashko@ti.com \
--cc=hkallweit1@gmail.com \
--cc=huangguangbin2@huawei.com \
--cc=j.vosburgh@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=michael@walle.cc \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=qiangqing.zhang@nxp.com \
--cc=richardcochran@gmail.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vfalico@gmail.com \
--cc=vladimir.oltean@nxp.com \
--cc=wangjie125@huawei.com \
--cc=wangyufen@huawei.com \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®