mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Su Weifeng <suweifeng1@huawei.com>
To: <gregkh@linuxfoundation.org>, <mst@redhat.com>
Cc: <linux-kernel@vger.kernel.org>, <shikemeng@huawei.com>,
	<liuzhiqiang26@huawei.com>, <linfeilong@huawei.com>,
	<zhanghongtao22@huawei.com>, Weifeng Su <suweifeng1@huawei.com>
Subject: [PATCH v3] uio:uio_pci_generic:Don't clear master bit when the process does not exit
Date: Sat, 4 Mar 2023 15:43:16 +0800	[thread overview]
Message-ID: <20230304074316.736922-1-suweifeng1@huawei.com> (raw)

From: Weifeng Su <suweifeng1@huawei.com>

The /dev/uioX device has concurrent operations in a few scenarios.

For example, when a process is operating the uio0 device, someone executes
like "cat /dev/uio0" command. In this case, the bus master bit is cleared
unconditionally. As a result, the running program cannot work commands
or I/Os, which is usually unaware of. This happens after
865a11f("uio/uio_pci_generic: Disable bus-mastering on release");
The restriction on the process that uses the PCI device is added. The new
process can be used only after the process that uses the PCI device exits.
Otherwise, the system returns a message indicating that the device is busy.

Signed-off-by: Weifeng Su <suweifeng1@huawei.com>
---

Change v2 -> v3:
  The process is restricted from using the PCI device. Before the process 
that uses the PCI device exits, the device returns EBUSY.
After the process exits, the master bit is cleared unconditionally 
to ensure DMA security.

 drivers/uio/uio_pci_generic.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/uio/uio_pci_generic.c b/drivers/uio/uio_pci_generic.c
index e03f9b532..19bf5ead9 100644
--- a/drivers/uio/uio_pci_generic.c
+++ b/drivers/uio/uio_pci_generic.c
@@ -31,6 +31,7 @@
 struct uio_pci_generic_dev {
 	struct uio_info info;
 	struct pci_dev *pdev;
+	atomic_t	refcnt;
 };
 
 static inline struct uio_pci_generic_dev *
@@ -39,10 +40,21 @@ to_uio_pci_generic_dev(struct uio_info *info)
 	return container_of(info, struct uio_pci_generic_dev, info);
 }
 
+static int open(struct uio_info *info, struct inode *inode)
+{
+	struct uio_pci_generic_dev *gdev = to_uio_pci_generic_dev(info);
+
+	if (atomic_add_unless(&gdev->refcnt, 1, 1))
+		return 0;
+	else
+		return -EBUSY;
+}
+
 static int release(struct uio_info *info, struct inode *inode)
 {
 	struct uio_pci_generic_dev *gdev = to_uio_pci_generic_dev(info);
 
+	atomic_dec(&gdev->refcnt);
 	/*
 	 * This driver is insecure when used with devices doing DMA, but some
 	 * people (mis)use it with such devices.
@@ -93,7 +105,9 @@ static int probe(struct pci_dev *pdev,
 	gdev->info.name = "uio_pci_generic";
 	gdev->info.version = DRIVER_VERSION;
 	gdev->info.release = release;
+	gdev->info.open = open;
 	gdev->pdev = pdev;
+	atomic_set(&gdev->refcnt, 0);
 	if (pdev->irq && (pdev->irq != IRQ_NOTCONNECTED)) {
 		gdev->info.irq = pdev->irq;
 		gdev->info.irq_flags = IRQF_SHARED;
-- 
2.33.0


             reply	other threads:[~2023-03-04  7:19 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-04  7:43 Su Weifeng [this message]
2023-03-09 11:05 ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230304074316.736922-1-suweifeng1@huawei.com \
    --to=suweifeng1@huawei.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linfeilong@huawei.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=liuzhiqiang26@huawei.com \
    --cc=mst@redhat.com \
    --cc=shikemeng@huawei.com \
    --cc=zhanghongtao22@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®