mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
To: unlisted-recipients:; (no To-header on input)
Cc: <quic_visr@quicinc.com>,
	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
	Banajit Goswami <bgoswami@quicinc.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>,
	"moderated list:QCOM AUDIO (ASoC) DRIVERS" 
	<alsa-devel@alsa-project.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: [PATCH] ASoC: codecs: tx-macro: Fix for KASAN: slab-out-of-bounds
Date: Sat, 4 Mar 2023 13:37:02 +0530	[thread overview]
Message-ID: <20230304080702.609-1-quic_visr@quicinc.com> (raw)

When we run syzkaller we get below Out of Bound.
    "KASAN: slab-out-of-bounds Read in regcache_flat_read"

    Below is the backtrace of the issue:

    dump_backtrace+0x0/0x4c8
    show_stack+0x34/0x44
    dump_stack_lvl+0xd8/0x118
    print_address_description+0x30/0x2d8
    kasan_report+0x158/0x198
    __asan_report_load4_noabort+0x44/0x50
    regcache_flat_read+0x10c/0x110
    regcache_read+0xf4/0x180
    _regmap_read+0xc4/0x278
    _regmap_update_bits+0x130/0x290
    regmap_update_bits_base+0xc0/0x15c
    snd_soc_component_update_bits+0xa8/0x22c
    snd_soc_component_write_field+0x68/0xd4
    tx_macro_digital_mute+0xec/0x140

    Actually There is no need to have decimator with 32 bits.
    By limiting the variable with short type u8 issue is resolved.

Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
---
 sound/soc/codecs/lpass-tx-macro.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/sound/soc/codecs/lpass-tx-macro.c b/sound/soc/codecs/lpass-tx-macro.c
index bf27bdd5be20..473d3cd39554 100644
--- a/sound/soc/codecs/lpass-tx-macro.c
+++ b/sound/soc/codecs/lpass-tx-macro.c
@@ -242,7 +242,7 @@ enum {
 
 struct tx_mute_work {
 	struct tx_macro *tx;
-	u32 decimator;
+	u8 decimator;
 	struct delayed_work dwork;
 };
 
@@ -635,7 +635,7 @@ static int tx_macro_mclk_enable(struct tx_macro *tx,
 	return 0;
 }
 
-static bool is_amic_enabled(struct snd_soc_component *component, int decimator)
+static bool is_amic_enabled(struct snd_soc_component *component, u8 decimator)
 {
 	u16 adc_mux_reg, adc_reg, adc_n;
 
@@ -849,7 +849,7 @@ static int tx_macro_enable_dec(struct snd_soc_dapm_widget *w,
 			       struct snd_kcontrol *kcontrol, int event)
 {
 	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
-	unsigned int decimator;
+	u8 decimator;
 	u16 tx_vol_ctl_reg, dec_cfg_reg, hpf_gate_reg, tx_gain_ctl_reg;
 	u8 hpf_cut_off_freq;
 	int hpf_delay = TX_MACRO_DMIC_HPF_DELAY_MS;
@@ -1064,7 +1064,8 @@ static int tx_macro_hw_params(struct snd_pcm_substream *substream,
 			      struct snd_soc_dai *dai)
 {
 	struct snd_soc_component *component = dai->component;
-	u32 decimator, sample_rate;
+	u32 sample_rate;
+	u8 decimator;
 	int tx_fs_rate;
 	struct tx_macro *tx = snd_soc_component_get_drvdata(component);
 
@@ -1128,7 +1129,7 @@ static int tx_macro_digital_mute(struct snd_soc_dai *dai, int mute, int stream)
 {
 	struct snd_soc_component *component = dai->component;
 	struct tx_macro *tx = snd_soc_component_get_drvdata(component);
-	u16 decimator;
+	u8 decimator;
 
 	/* active decimator not set yet */
 	if (tx->active_decimator[dai->id] == -1)
-- 
2.17.1


             reply	other threads:[~2023-03-04  8:10 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-04  8:07 Ravulapati Vishnu Vardhan Rao [this message]
2023-03-06 12:45 ` Mark Brown
  -- strict thread matches above, loose matches on Subject: below --
2023-03-03 12:57 Ravulapati Vishnu Vardhan Rao
2023-03-03 14:07 ` Mark Brown
2023-03-03 14:15 ` Srinivas Kandagatla
2023-03-03 17:32   ` VISHNUVARDHAN RAO RAVULAPATI
2023-03-03 12:12 Ravulapati Vishnu Vardhan Rao
2023-03-03 12:41 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230304080702.609-1-quic_visr@quicinc.com \
    --to=quic_visr@quicinc.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=bgoswami@quicinc.com \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®