From: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
To: ajit.khaparde@broadcom.com
Cc: sriharsha.basavapatna@broadcom.com, somnath.kotur@broadcom.com,
davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
pabeni@redhat.com, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org,
Jiapeng Chong <jiapeng.chong@linux.alibaba.com>,
Abaci Robot <abaci@linux.alibaba.com>
Subject: [PATCH] emulex/benet: clean up some inconsistent indenting
Date: Tue, 7 Mar 2023 13:41:38 +0800 [thread overview]
Message-ID: <20230307054138.21632-1-jiapeng.chong@linux.alibaba.com> (raw)
No functional modification involved.
drivers/net/ethernet/emulex/benet/be_cmds.c:1120 be_cmd_pmac_add() warn: inconsistent indenting.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4396
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
---
drivers/net/ethernet/emulex/benet/be_cmds.c | 27 +++++++++++----------
1 file changed, 14 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 08ec84cd21c0..61adcebeef01 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -135,7 +135,8 @@ static int be_mcc_notify(struct be_adapter *adapter)
/* To check if valid bit is set, check the entire word as we don't know
* the endianness of the data (old entry is host endian while a new entry is
- * little endian) */
+ * little endian)
+ */
static inline bool be_mcc_compl_is_new(struct be_mcc_compl *compl)
{
u32 flags;
@@ -248,7 +249,8 @@ static int be_mcc_compl_process(struct be_adapter *adapter,
u8 opcode = 0, subsystem = 0;
/* Just swap the status to host endian; mcc tag is opaquely copied
- * from mcc_wrb */
+ * from mcc_wrb
+ */
be_dws_le_to_cpu(compl, 4);
base_status = base_status(compl->status);
@@ -657,8 +659,7 @@ static int be_mbox_db_ready_wait(struct be_adapter *adapter, void __iomem *db)
return 0;
}
-/*
- * Insert the mailbox address into the doorbell in two steps
+/* Insert the mailbox address into the doorbell in two steps
* Polls on the mbox doorbell till a command completion (or a timeout) occurs
*/
static int be_mbox_notify_wait(struct be_adapter *adapter)
@@ -802,7 +803,7 @@ static void be_wrb_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr,
req_hdr->subsystem = subsystem;
req_hdr->request_length = cpu_to_le32(cmd_len - sizeof(*req_hdr));
req_hdr->version = 0;
- fill_wrb_tags(wrb, (ulong) req_hdr);
+ fill_wrb_tags(wrb, (ulong)req_hdr);
wrb->payload_length = cmd_len;
if (mem) {
wrb->embedded |= (1 & MCC_WRB_SGE_CNT_MASK) <<
@@ -832,8 +833,8 @@ static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages,
static inline struct be_mcc_wrb *wrb_from_mbox(struct be_adapter *adapter)
{
struct be_dma_mem *mbox_mem = &adapter->mbox_mem;
- struct be_mcc_wrb *wrb
- = &((struct be_mcc_mailbox *)(mbox_mem->va))->wrb;
+ struct be_mcc_wrb *wrb = &((struct be_mcc_mailbox *)(mbox_mem->va))->wrb;
+
memset(wrb, 0, sizeof(*wrb));
return wrb;
}
@@ -896,7 +897,7 @@ static struct be_mcc_wrb *be_cmd_copy(struct be_adapter *adapter,
memcpy(dest_wrb, wrb, sizeof(*wrb));
if (wrb->embedded & cpu_to_le32(MCC_WRB_EMBEDDED_MASK))
- fill_wrb_tags(dest_wrb, (ulong) embedded_payload(wrb));
+ fill_wrb_tags(dest_wrb, (ulong)embedded_payload(wrb));
return dest_wrb;
}
@@ -1114,7 +1115,7 @@ int be_cmd_pmac_add(struct be_adapter *adapter, const u8 *mac_addr,
err:
mutex_unlock(&adapter->mcc_lock);
- if (base_status(status) == MCC_STATUS_UNAUTHORIZED_REQUEST)
+ if (base_status(status) == MCC_STATUS_UNAUTHORIZED_REQUEST)
status = -EPERM;
return status;
@@ -1803,7 +1804,7 @@ int be_cmd_get_fat_dump(struct be_adapter *adapter, u32 buf_len, void *buf)
total_size = buf_len;
- get_fat_cmd.size = sizeof(struct be_cmd_req_get_fat) + 60*1024;
+ get_fat_cmd.size = sizeof(struct be_cmd_req_get_fat) + 60 * 1024;
get_fat_cmd.va = dma_alloc_coherent(&adapter->pdev->dev,
get_fat_cmd.size,
&get_fat_cmd.dma, GFP_ATOMIC);
@@ -1813,7 +1814,7 @@ int be_cmd_get_fat_dump(struct be_adapter *adapter, u32 buf_len, void *buf)
mutex_lock(&adapter->mcc_lock);
while (total_size) {
- buf_size = min(total_size, (u32)60*1024);
+ buf_size = min(total_size, (u32)60 * 1024);
total_size -= buf_size;
wrb = wrb_from_mccq(adapter);
@@ -3362,7 +3363,7 @@ int be_cmd_ddr_dma_test(struct be_adapter *adapter, u64 pattern,
req->pattern = cpu_to_le64(pattern);
req->byte_count = cpu_to_le32(byte_cnt);
for (i = 0; i < byte_cnt; i++) {
- req->snd_buff[i] = (u8)(pattern >> (j*8));
+ req->snd_buff[i] = (u8)(pattern >> (j * 8));
j++;
if (j > 7)
j = 0;
@@ -3846,7 +3847,7 @@ int be_cmd_set_mac_list(struct be_adapter *adapter, u8 *mac_array,
req->hdr.domain = domain;
req->mac_count = mac_count;
if (mac_count)
- memcpy(req->mac, mac_array, ETH_ALEN*mac_count);
+ memcpy(req->mac, mac_array, ETH_ALEN * mac_count);
status = be_mcc_notify_wait(adapter);
--
2.20.1.7.g153144c
next reply other threads:[~2023-03-07 5:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-07 5:41 Jiapeng Chong [this message]
2023-03-08 13:10 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230307054138.21632-1-jiapeng.chong@linux.alibaba.com \
--to=jiapeng.chong@linux.alibaba.com \
--cc=abaci@linux.alibaba.com \
--cc=ajit.khaparde@broadcom.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=somnath.kotur@broadcom.com \
--cc=sriharsha.basavapatna@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®