Re: [PATCH 2/3] arm64: dts: renesas: rzg2l-smarc: Add OV5645 node

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

On Mon, Mar 06, 2023 at 08:27:19PM +0100, Geert Uytterhoeven wrote:
> Hi Prabhakar,
> 
> On Thu, Feb 16, 2023 at 6:57 PM Prabhakar <prabhakar.csengg@gmail.com> wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> >
> > OV5645 sensor can be connected to the CN1 connector on the
> > carrier board. This patch adds the ov5645 node under i2c0 node.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> Thanks for your patch!
> 
> > --- a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
> > +++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
> > @@ -6,6 +6,10 @@
> >   */
> >
> >  /dts-v1/;
> > +
> > +/* comment the #define statement if OV5645 is not connected to CN1  */
> > +#define CAM_INTERFACE_OV5645   1
> 
> I believe the camera is optional ("can be connector" above).
> So shouldn't this be commented out by default?

Even better, could you turn this into a DT overlay ?

> The rest LGTM, so with the above sorted out:
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

-- 
Regards,

Laurent Pinchart