mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Nishanth Menon <nm@ti.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Tero Kristo <kristo@kernel.org>,
	Vignesh Raghavendra <vigneshr@ti.com>, Nishanth Menon <nm@ti.com>,
	Julien Panis <jpanis@baylibre.com>, Bryan Brattlof <bb@ti.com>
Subject: [PATCH 2/2] arm64: dts: ti: k3-am62: Add watchdog nodes
Date: Sat, 11 Mar 2023 04:58:50 -0600	[thread overview]
Message-ID: <20230311105850.21811-3-nm@ti.com> (raw)
In-Reply-To: <20230311105850.21811-1-nm@ti.com>

From: Julien Panis <jpanis@baylibre.com>

Add nodes for watchdogs :
- 5 in main domain
- 1 in MCU domain
- 1 in wakeup domain

Signed-off-by: Julien Panis <jpanis@baylibre.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Changes since V3:
- Dropped the board level wdt reservation, do that with overlays based on
  modifiable firmware dependencies.

V3: https://lore.kernel.org/all/20221109093026.103790-2-jpanis@baylibre.com/

 arch/arm64/boot/dts/ti/k3-am62-main.dtsi   | 45 ++++++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi    |  9 +++++
 arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi | 11 ++++++
 3 files changed, 65 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index ea683fd77d6a..90d5f145de4f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -758,6 +758,51 @@ main_mcan0: can@20701000 {
 		status = "disabled";
 	};
 
+	main_rti0: watchdog@e000000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e000000 0x00 0x100>;
+		clocks = <&k3_clks 125 0>;
+		power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 125 0>;
+		assigned-clock-parents = <&k3_clks 125 2>;
+	};
+
+	main_rti1: watchdog@e010000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e010000 0x00 0x100>;
+		clocks = <&k3_clks 126 0>;
+		power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 126 0>;
+		assigned-clock-parents = <&k3_clks 126 2>;
+	};
+
+	main_rti2: watchdog@e020000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e020000 0x00 0x100>;
+		clocks = <&k3_clks 127 0>;
+		power-domains = <&k3_pds 127 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 127 0>;
+		assigned-clock-parents = <&k3_clks 127 2>;
+	};
+
+	main_rti3: watchdog@e030000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e030000 0x00 0x100>;
+		clocks = <&k3_clks 128 0>;
+		power-domains = <&k3_pds 128 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 128 0>;
+		assigned-clock-parents = <&k3_clks 128 2>;
+	};
+
+	main_rti4: watchdog@e0f0000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x0e0f0000 0x00 0x100>;
+		clocks = <&k3_clks 130 0>;
+		power-domains = <&k3_pds 130 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 130 0>;
+		assigned-clock-parents = <&k3_clks 130 2>;
+	};
+
 	epwm0: pwm@23000000 {
 		compatible = "ti,am64-epwm", "ti,am3352-ehrpwm";
 		#pwm-cells = <3>;
diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
index a427231527c3..bec118921c4c 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
@@ -130,4 +130,13 @@ mcu_gpio0: gpio@4201000 {
 		clocks = <&k3_clks 79 0>;
 		clock-names = "gpio";
 	};
+
+	mcu_rti0: watchdog@4880000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x04880000 0x00 0x100>;
+		clocks = <&k3_clks 131 0>;
+		power-domains = <&k3_pds 131 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 131 0>;
+		assigned-clock-parents = <&k3_clks 131 2>;
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
index fec81546fbbd..7726ebae2539 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
@@ -50,4 +50,15 @@ wkup_rtc0: rtc@2b1f0000 {
 		power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
 		wakeup-source;
 	};
+
+	wkup_rti0: watchdog@2b000000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x00 0x2b000000 0x00 0x100>;
+		clocks = <&k3_clks 132 0>;
+		power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 132 0>;
+		assigned-clock-parents = <&k3_clks 132 2>;
+		/* Used by DM firmware */
+		status = "reserved";
+	};
 };
-- 
2.37.2


  parent reply	other threads:[~2023-03-11 10:59 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-11 10:58 [PATCH 0/2] arm64: dts: ti: k3-am62: Add watchdog and rtc nodes Nishanth Menon
2023-03-11 10:58 ` [PATCH 1/2] arm64: dts: ti: k3-am62-wakeup: Introduce RTC node Nishanth Menon
2023-03-11 10:58 ` Nishanth Menon [this message]
2023-03-20 15:36   ` [PATCH 2/2] arm64: dts: ti: k3-am62: Add watchdog nodes Bryan Brattlof
2023-03-20 15:44     ` Nishanth Menon
2023-03-20 15:37 ` [PATCH 0/2] arm64: dts: ti: k3-am62: Add watchdog and rtc nodes Bryan Brattlof

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230311105850.21811-3-nm@ti.com \
    --to=nm@ti.com \
    --cc=bb@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jpanis@baylibre.com \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®