From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Jose Abreu <joabreu@synopsys.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Russell King <linux@armlinux.org.uk>,
Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Ong Boon Leong <boon.leong.ong@intel.com>,
Voon Weifeng <weifeng.voon@intel.com>,
Wong Vee Khee <vee.khee.wong@linux.intel.com>,
Tan Tee Min <tee.min.tan@intel.com>,
Richard Cochran <richardcochran@gmail.com>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>,
Serge Semin <fancer.lancer@gmail.com>,
Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>,
Christian Marangi <ansuelsmth@gmail.com>,
Biao Huang <biao.huang@mediatek.com>,
Yang Yingliang <yangyingliang@huawei.com>,
<netdev@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Jose Abreu <Jose.Abreu@synopsys.com>
Subject: [PATCH net 12/13] net: stmmac: Stop overriding the PTP clock info static instance
Date: Tue, 14 Mar 2023 01:42:36 +0300 [thread overview]
Message-ID: <20230313224237.28757-13-Sergey.Semin@baikalelectronics.ru> (raw)
In-Reply-To: <20230313224237.28757-1-Sergey.Semin@baikalelectronics.ru>
It had been defined as constant before commit 9a8a02c9d46d ("net: stmmac:
Add Flexible PPS support"). But then it was converted to be just static,
which fields may get to be modified on each stmmac_ptp_register()
invocation. Since that method is called from the driver probe method, a
concurrent DW *MAC NIC initialization causes the race condition for the
updated stmmac_ptp_clock_ops fields. That also may lead to setting an
inappropriate max_adj value, which was specific for one device, was
written to the stmmac_ptp_clock_ops, but then copied to the private
ptp_clock_info instance unmodified.
So to speak let's leave the stmmac_ptp_clock_ops content untouched and
just copy it to the device-specific instance of the ptp_clock_info
structure, which fields could be then accordingly modified. After that we
can get the const qualifier back to the stmmac_ptp_clock_ops instance
definition.
While at it remove pointless zero-initialization of the
stmmac_ptp_clock_ops fields. It's redundant since the structure is static.
Fixes: 9a8a02c9d46d ("net: stmmac: Add Flexible PPS support")
Fixes: 190f73ab4c43 ("net: stmmac: setup higher frequency clk support for EHL & TGL")
Fixes: f4da56529da6 ("net: stmmac: Add support for external trigger timestamping")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
.../net/ethernet/stmicro/stmmac/stmmac_ptp.c | 19 +++++++------------
1 file changed, 7 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
index b4388ca8d211..19a28b1cc272 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
@@ -254,15 +254,10 @@ static int stmmac_getcrosststamp(struct ptp_clock_info *ptp,
}
/* structure describing a PTP hardware clock */
-static struct ptp_clock_info stmmac_ptp_clock_ops = {
+static const struct ptp_clock_info stmmac_ptp_clock_ops = {
.owner = THIS_MODULE,
.name = "stmmac ptp",
.max_adj = 62500000,
- .n_alarm = 0,
- .n_ext_ts = 0, /* will be overwritten in stmmac_ptp_register */
- .n_per_out = 0, /* will be overwritten in stmmac_ptp_register */
- .n_pins = 0,
- .pps = 0,
.adjfine = stmmac_adjust_freq,
.adjtime = stmmac_adjust_time,
.gettime64 = stmmac_get_time,
@@ -287,21 +282,21 @@ void stmmac_ptp_register(struct stmmac_priv *priv)
priv->pps[i].available = true;
}
- if (priv->plat->ptp_max_adj)
- stmmac_ptp_clock_ops.max_adj = priv->plat->ptp_max_adj;
-
/* Calculate the clock domain crossing (CDC) error if necessary */
priv->plat->cdc_error_adj = 0;
if (priv->plat->has_gmac4 && priv->plat->clk_ptp_rate)
priv->plat->cdc_error_adj = (2 * NSEC_PER_SEC) / priv->plat->clk_ptp_rate;
- stmmac_ptp_clock_ops.n_per_out = priv->dma_cap.pps_out_num;
- stmmac_ptp_clock_ops.n_ext_ts = priv->dma_cap.aux_snapshot_n;
-
rwlock_init(&priv->ptp_lock);
mutex_init(&priv->aux_ts_lock);
priv->ptp_clock_ops = stmmac_ptp_clock_ops;
+ if (priv->plat->ptp_max_adj)
+ priv->ptp_clock_ops.max_adj = priv->plat->ptp_max_adj;
+
+ priv->ptp_clock_ops.n_per_out = priv->dma_cap.pps_out_num;
+ priv->ptp_clock_ops.n_ext_ts = priv->dma_cap.aux_snapshot_n;
+
priv->ptp_clock = ptp_clock_register(&priv->ptp_clock_ops,
priv->device);
if (IS_ERR(priv->ptp_clock)) {
--
2.39.2
next prev parent reply other threads:[~2023-03-13 22:44 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-13 22:42 [PATCH net 00/13] net: stmmac: Fixes bundle #1 Serge Semin
2023-03-13 22:42 ` [PATCH net 01/13] net: phy: realtek: Fix events detection failure in LPI mode Serge Semin
2023-03-14 0:39 ` Andrew Lunn
2023-03-14 11:16 ` Serge Semin
2023-03-13 22:42 ` [PATCH net 02/13] net: stmmac: Omit last desc flag for non-linear jumbos in chain-mode Serge Semin
2023-03-13 22:42 ` [PATCH net 03/13] net: stmmac: Fix extended descriptors usage for " Serge Semin
2023-03-13 22:42 ` [PATCH net 04/13] net: stmmac: dwmac-sun8i: Don't modify chain-mode module parameter Serge Semin
2023-03-13 22:42 ` [PATCH net 05/13] net: stmmac: Enable ATDS for chain-mode Serge Semin
2023-03-14 11:42 ` Piotr Raczynski
2023-03-13 22:42 ` [PATCH net 06/13] net: stmmac: Free temporary Rx SKB on request Serge Semin
2023-03-14 11:26 ` Piotr Raczynski
2023-03-13 22:42 ` [PATCH net 07/13] net: stmmac: Free Rx descs on Tx allocation failure Serge Semin
2023-03-14 9:22 ` Piotr Raczynski
2023-03-13 22:42 ` [PATCH net 08/13] net: stmmac: Fix Rx IC bit setting procedure for Rx-mitigation Serge Semin
2023-03-13 22:42 ` [PATCH net 09/13] net: stmmac: Remove default maxmtu DT-platform setting Serge Semin
2023-03-14 11:20 ` Piotr Raczynski
2023-03-14 12:03 ` Serge Semin
2023-03-13 22:42 ` [PATCH net 10/13] net: stmmac: Make buf_sz module parameter useful Serge Semin
2023-03-13 22:42 ` [PATCH net 11/13] net: stmmac: gmac4: Use dwmac410_disable_dma_irq for DW MAC v4.10 DMA Serge Semin
2023-03-13 22:42 ` Serge Semin [this message]
2023-03-13 22:42 ` [PATCH net 13/13] net: dwmac-loongson: Perceive zero IRQ as invalid Serge Semin
2023-03-14 8:20 ` Piotr Raczynski
2023-03-14 11:38 ` Serge Semin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230313224237.28757-13-Sergey.Semin@baikalelectronics.ru \
--to=sergey.semin@baikalelectronics.ru \
--cc=Alexey.Malahov@baikalelectronics.ru \
--cc=Jose.Abreu@synopsys.com \
--cc=Pavel.Parkhomenko@baikalelectronics.ru \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew@lunn.ch \
--cc=ansuelsmth@gmail.com \
--cc=biao.huang@mediatek.com \
--cc=boon.leong.ong@intel.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=fancer.lancer@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=joabreu@synopsys.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux@armlinux.org.uk \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=peppe.cavallaro@st.com \
--cc=richardcochran@gmail.com \
--cc=tee.min.tan@intel.com \
--cc=vee.khee.wong@linux.intel.com \
--cc=weifeng.voon@intel.com \
--cc=yangyingliang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®