From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
To: linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] MIPS: sibyte: Remove Sibyte CARMEL and CRHINE board support
Date: Wed, 15 Mar 2023 15:12:02 +0100 [thread overview]
Message-ID: <20230315141202.107168-1-tsbogend@alpha.franken.de> (raw)
Looks like these boards were nether in active use, so let's remove them.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
---
arch/mips/Kconfig | 18 -----------
arch/mips/include/asm/sibyte/board.h | 6 +---
arch/mips/include/asm/sibyte/carmel.h | 45 ---------------------------
arch/mips/include/asm/sibyte/swarm.h | 5 ---
arch/mips/sibyte/Kconfig | 9 ------
arch/mips/sibyte/Makefile | 4 ---
arch/mips/sibyte/Platform | 4 ---
arch/mips/sibyte/swarm/setup.c | 6 ----
8 files changed, 1 insertion(+), 96 deletions(-)
delete mode 100644 arch/mips/include/asm/sibyte/carmel.h
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e2f3ca73f40d..277daaab1b0d 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -795,24 +795,6 @@ config SGI_IP32
help
If you want this kernel to run on SGI O2 workstation, say Y here.
-config SIBYTE_CRHINE
- bool "Sibyte BCM91120C-CRhine"
- select BOOT_ELF32
- select SIBYTE_BCM1120
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_SB1
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
-config SIBYTE_CARMEL
- bool "Sibyte BCM91120x-Carmel"
- select BOOT_ELF32
- select SIBYTE_BCM1120
- select SWAP_IO_SPACE
- select SYS_HAS_CPU_SB1
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_LITTLE_ENDIAN
-
config SIBYTE_CRHONE
bool "Sibyte BCM91125C-CRhone"
select BOOT_ELF32
diff --git a/arch/mips/include/asm/sibyte/board.h b/arch/mips/include/asm/sibyte/board.h
index 20fe2f16c97e..03463faa4244 100644
--- a/arch/mips/include/asm/sibyte/board.h
+++ b/arch/mips/include/asm/sibyte/board.h
@@ -7,7 +7,7 @@
#define _SIBYTE_BOARD_H
#if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_CRHONE) || \
- defined(CONFIG_SIBYTE_CRHINE) || defined(CONFIG_SIBYTE_LITTLESUR)
+ defined(CONFIG_SIBYTE_LITTLESUR)
#include <asm/sibyte/swarm.h>
#endif
@@ -15,10 +15,6 @@
#include <asm/sibyte/sentosa.h>
#endif
-#ifdef CONFIG_SIBYTE_CARMEL
-#include <asm/sibyte/carmel.h>
-#endif
-
#ifdef CONFIG_SIBYTE_BIGSUR
#include <asm/sibyte/bigsur.h>
#endif
diff --git a/arch/mips/include/asm/sibyte/carmel.h b/arch/mips/include/asm/sibyte/carmel.h
deleted file mode 100644
index c6730d7a6392..000000000000
--- a/arch/mips/include/asm/sibyte/carmel.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2002 Broadcom Corporation
- */
-#ifndef __ASM_SIBYTE_CARMEL_H
-#define __ASM_SIBYTE_CARMEL_H
-
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_int.h>
-
-#define SIBYTE_BOARD_NAME "Carmel"
-
-#define GPIO_PHY_INTERRUPT 2
-#define GPIO_NONMASKABLE_INT 3
-#define GPIO_CF_INSERTED 6
-#define GPIO_MONTEREY_RESET 7
-#define GPIO_QUADUART_INT 8
-#define GPIO_CF_INT 9
-#define GPIO_FPGA_CCLK 10
-#define GPIO_FPGA_DOUT 11
-#define GPIO_FPGA_DIN 12
-#define GPIO_FPGA_PGM 13
-#define GPIO_FPGA_DONE 14
-#define GPIO_FPGA_INIT 15
-
-#define LEDS_CS 2
-#define LEDS_PHYS 0x100C0000
-#define MLEDS_CS 3
-#define MLEDS_PHYS 0x100A0000
-#define UART_CS 4
-#define UART_PHYS 0x100D0000
-#define ARAVALI_CS 5
-#define ARAVALI_PHYS 0x11000000
-#define IDE_CS 6
-#define IDE_PHYS 0x100B0000
-#define ARAVALI2_CS 7
-#define ARAVALI2_PHYS 0x100E0000
-
-#if defined(CONFIG_SIBYTE_CARMEL)
-#define K_GPIO_GB_IDE 9
-#define K_INT_GB_IDE (K_INT_GPIO_0 + K_GPIO_GB_IDE)
-#endif
-
-
-#endif /* __ASM_SIBYTE_CARMEL_H */
diff --git a/arch/mips/include/asm/sibyte/swarm.h b/arch/mips/include/asm/sibyte/swarm.h
index 947122f487ed..49ea7a645c15 100644
--- a/arch/mips/include/asm/sibyte/swarm.h
+++ b/arch/mips/include/asm/sibyte/swarm.h
@@ -24,11 +24,6 @@
#define SIBYTE_HAVE_PCMCIA 0
#define SIBYTE_HAVE_IDE 0
#endif
-#ifdef CONFIG_SIBYTE_CRHINE
-#define SIBYTE_BOARD_NAME "BCM91120C (CRhine)"
-#define SIBYTE_HAVE_PCMCIA 0
-#define SIBYTE_HAVE_IDE 0
-#endif
/* Generic bus chip selects */
#define LEDS_CS 3
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
index c437bc02dd08..c4596d49edf1 100644
--- a/arch/mips/sibyte/Kconfig
+++ b/arch/mips/sibyte/Kconfig
@@ -10,15 +10,6 @@ config SIBYTE_SB1250
select SIBYTE_SB1xxx_SOC
select SYS_SUPPORTS_SMP
-config SIBYTE_BCM1120
- bool
- select CEVT_SB1250
- select CSRC_SB1250
- select IRQ_MIPS_CPU
- select SIBYTE_BCM112X
- select SIBYTE_HAS_ZBUS_PROFILING
- select SIBYTE_SB1xxx_SOC
-
config SIBYTE_BCM1125
bool
select CEVT_SB1250
diff --git a/arch/mips/sibyte/Makefile b/arch/mips/sibyte/Makefile
index ca0d57824d56..47078353fe8a 100644
--- a/arch/mips/sibyte/Makefile
+++ b/arch/mips/sibyte/Makefile
@@ -10,15 +10,11 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += bcm1480/
obj-$(CONFIG_SIBYTE_BCM1x80) += common/
#
-# Sibyte BCM91120x (Carmel) board
-# Sibyte BCM91120C (CRhine) board
# Sibyte BCM91125C (CRhone) board
# Sibyte BCM91125E (Rhone) board
# Sibyte SWARM board
# Sibyte BCM91x80 (BigSur) board
#
-obj-$(CONFIG_SIBYTE_CARMEL) += swarm/
-obj-$(CONFIG_SIBYTE_CRHINE) += swarm/
obj-$(CONFIG_SIBYTE_CRHONE) += swarm/
obj-$(CONFIG_SIBYTE_RHONE) += swarm/
obj-$(CONFIG_SIBYTE_SENTOSA) += swarm/
diff --git a/arch/mips/sibyte/Platform b/arch/mips/sibyte/Platform
index 304b4d16dfbf..937108e41f13 100644
--- a/arch/mips/sibyte/Platform
+++ b/arch/mips/sibyte/Platform
@@ -18,16 +18,12 @@ cflags-$(CONFIG_SIBYTE_BCM1x80) += \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
#
-# Sibyte BCM91120x (Carmel) board
-# Sibyte BCM91120C (CRhine) board
# Sibyte BCM91125C (CRhone) board
# Sibyte BCM91125E (Rhone) board
# Sibyte BCM91250A (SWARM) board
# Sibyte BCM91250C2 (LittleSur) board
# Sibyte BCM91x80 (BigSur) board
#
-load-$(CONFIG_SIBYTE_CARMEL) := 0xffffffff80100000
-load-$(CONFIG_SIBYTE_CRHINE) := 0xffffffff80100000
load-$(CONFIG_SIBYTE_CRHONE) := 0xffffffff80100000
load-$(CONFIG_SIBYTE_RHONE) := 0xffffffff80100000
load-$(CONFIG_SIBYTE_SENTOSA) := 0xffffffff80100000
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index 9e7a1e305f61..76683993cdd3 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -146,12 +146,6 @@ void __init plat_mem_setup(void)
#ifdef LEDS_PHYS
-#ifdef CONFIG_SIBYTE_CARMEL
-/* XXXKW need to detect Monterey/LittleSur/etc */
-#undef LEDS_PHYS
-#define LEDS_PHYS MLEDS_PHYS
-#endif
-
void setleds(char *str)
{
void *reg;
--
2.35.3
next reply other threads:[~2023-03-15 14:13 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-15 14:12 Thomas Bogendoerfer [this message]
2023-03-17 10:23 ` Thomas Bogendoerfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230315141202.107168-1-tsbogend@alpha.franken.de \
--to=tsbogend@alpha.franken.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®