mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Tianling Shen <cnsztl@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Heiko Stuebner <heiko@sntech.de>,
	Jagan Teki <jagan@amarulasolutions.com>,
	Peter Geis <pgwipeout@gmail.com>, Andy Yan <andyshrk@163.com>,
	Tianling Shen <cnsztl@gmail.com>,
	Brian Norris <briannorris@chromium.org>,
	Chris Morgan <macromorgan@hotmail.com>,
	Sebastian Reichel <sebastian.reichel@collabora.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Michael Riesch <michael.riesch@wolfvision.net>,
	Maya Matuszczyk <maccraft123mc@gmail.com>,
	Andrew Powers-Holmes <aholmes@omnom.net>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Vasily Khoruzhick <anarsoul@gmail.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 3/5] arm64: dts: rockchip: Add FriendlyElec NanoPi R5C
Date: Thu, 16 Mar 2023 00:02:26 +0800	[thread overview]
Message-ID: <20230315160228.2362-4-cnsztl@gmail.com> (raw)
In-Reply-To: <20230315160228.2362-1-cnsztl@gmail.com>

FriendlyElec NanoPi R5C is an open-sourced mini IoT gateway device.

Specification:
- Rockchip RK3568
- 1/4GB LPDDR4X RAM
- 8/32GB eMMC
- SD card slot
- M.2 Connector
- 2x USB 3.0 Port
- 2x 2500 Base-T (PCIe, r8125)
- HDMI 2.0
- MIPI DSI/CSI
- USB Type C 5V

Signed-off-by: Tianling Shen <cnsztl@gmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3568-nanopi-r5c.dts   | 112 ++++++++++++++++++
 2 files changed, 113 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index ade66d846a20..a315a8117b0f 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -84,6 +84,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
new file mode 100644
index 000000000000..26b391910464
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyelec.com)
+ *
+ * Copyright (c) 2023 Tianling Shen <cnsztl@immortalwrt.org>
+ */
+
+/dts-v1/;
+#include "rk3568-nanopi-r5s.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi R5C";
+	compatible = "friendlyarm,nanopi-r5c", "rockchip,rk3568";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&reset_button_pin>;
+
+		button-reset {
+			debounce-interval = <50>;
+			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan_led_pin>, <&power_led_pin>, <&wan_led_pin>, <&wlan_led_pin>;
+
+		led-lan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_led: led-power {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wlan {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie20_reset_pin>;
+	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pcie3x1 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	num-lanes = <1>;
+	reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio-leds {
+		lan_led_pin: lan-led-pin {
+			rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		power_led_pin: power-led-pin {
+			rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wan_led_pin: wan-led-pin {
+			rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wlan_led_pin: wlan-led-pin {
+			rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie20_reset_pin: pcie20-reset-pin {
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	rockchip-key {
+		reset_button_pin: reset-button-pin {
+			rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
-- 
2.17.1


  parent reply	other threads:[~2023-03-15 16:03 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-15 16:02 [PATCH 0/5] arm64: dts: rockchip: improve support for NanoPi R5 series Tianling Shen
2023-03-15 16:02 ` [PATCH 1/5] arm64: dts: rockchip: create common dtsi " Tianling Shen
2023-03-15 16:02 ` [PATCH 2/5] dt-bindings: Add doc for FriendlyARM NanoPi R5C Tianling Shen
2023-03-16  7:28   ` Krzysztof Kozlowski
2023-03-15 16:02 ` Tianling Shen [this message]
2023-03-15 16:02 ` [PATCH 4/5] arm64: dts: rockchip: fix gmac support for NanoPi R5S Tianling Shen
2023-03-16  0:16   ` Vasily Khoruzhick
2023-03-16  5:34     ` Tianling Shen
2023-03-16  7:37       ` Jonas Karlman
2023-03-16  8:46         ` Tianling Shen
2023-03-16 14:47           ` Tianling Shen
2023-03-15 16:02 ` [PATCH 5/5] arm64: dts: rockchip: enable rk809 audio codec on the NanoPi R5 series Tianling Shen
2023-03-15 23:54   ` Vasily Khoruzhick
2023-03-16  6:25     ` Tianling Shen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230315160228.2362-4-cnsztl@gmail.com \
    --to=cnsztl@gmail.com \
    --cc=aholmes@omnom.net \
    --cc=anarsoul@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=andyshrk@163.com \
    --cc=briannorris@chromium.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=jagan@amarulasolutions.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=maccraft123mc@gmail.com \
    --cc=macromorgan@hotmail.com \
    --cc=michael.riesch@wolfvision.net \
    --cc=pgwipeout@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=sebastian.reichel@collabora.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®