[PATCH v2 1/2] arm64: dts: exynos: drop mshc aliases

[Henrik Grimler <henrik@grimler.se>]

Previously, the mshc0 alias has been necessary so that
MMC_CAP_1_8V_DDR | MMC_CAP_8_BIT_DATA are set for mshc_0/mmc_0.
However, these capabilities should be described in the device tree so
that we do not have to rely on the alias.

The property mmc-ddr-1_8v replaces MMC_CAP_1_8V_DDR, while bus_width =
<8>, which is already set for all the mshc0/mmc0 nodes, replaces
MMC_CAP_8_BIT_DATA.

Also drop other mshc aliases as they are not needed.

Signed-off-by: Henrik Grimler <henrik@grimler.se>
---

Changes since v1:
* Add mmc-ddr-1_8v property so that capabilities stays the same
  when mshc0 alias is removed

 arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 3 +--
 arch/arm64/boot/dts/exynos/exynos7-espresso.dts       | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index f54f30633417..868f7b98a637 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -40,8 +40,6 @@ aliases {
 		spi2 = &spi_2;
 		spi3 = &spi_3;
 		spi4 = &spi_4;
-		mshc0 = &mshc_0;
-		mshc2 = &mshc_2;
 	};
 
 	chosen {
@@ -952,6 +950,7 @@ &i2s1 {
 
 &mshc_0 {
 	status = "okay";
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	cap-mmc-highspeed;
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index f3f4a6ab4b49..35d949099166 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -18,8 +18,6 @@ / {
 
 	aliases {
 		serial0 = &serial_2;
-		mshc0 = &mmc_0;
-		mshc2 = &mmc_2;
 	};
 
 	chosen {
@@ -362,6 +360,7 @@ pmic_irq: pmic-irq-pins {
 &mmc_0 {
 	status = "okay";
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	non-removable;
 	card-detect-delay = <200>;
-- 
2.30.2