From: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
To: <lee@kernel.org>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>, <sre@kernel.org>,
<lgirdwood@gmail.com>, <broonie@kernel.org>
Cc: <Zeynep.Arslanbenzer@analog.com>, <Nurettin.Bolucu@analog.com>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-pm@vger.kernel.org>
Subject: [PATCH v2 7/8] dt-bindings: mfd: max77658: Add ADI MAX77658
Date: Wed, 22 Mar 2023 08:56:27 +0300 [thread overview]
Message-ID: <20230322055628.4441-8-Zeynep.Arslanbenzer@analog.com> (raw)
In-Reply-To: <20230322055628.4441-1-Zeynep.Arslanbenzer@analog.com>
Add ADI MAX77658 devicetree document.
Signed-off-by: Nurettin Bolucu <Nurettin.Bolucu@analog.com>
Signed-off-by: Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
---
.../devicetree/bindings/mfd/adi,max77658.yaml | 199 ++++++++++++++++++
1 file changed, 199 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/adi,max77658.yaml
diff --git a/Documentation/devicetree/bindings/mfd/adi,max77658.yaml b/Documentation/devicetree/bindings/mfd/adi,max77658.yaml
new file mode 100644
index 000000000000..6edb59e8f446
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/adi,max77658.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/adi,max77658.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX77643/MAX77654/MAX77658/MAX77659 PMIC from ADI
+
+maintainers:
+ - Nurettin Bolucu <Nurettin.Bolucu@analog.com>
+ - Zeynep Arslanbenzer <Zeynep.Arslanbenzer@analog.com>
+
+description: |
+ MAX77643, MAX77654, MAX77658 and MAX77659 devices are a family of ADI PMICs
+ providing battery charging and power supply solutions for
+ low-power applications.
+
+ MAX77643 is a Power Management IC with 1 LDO regulator.
+
+ MAX77654 is a Power Management IC with 2 LDO regulators and 1 charger.
+
+ MAX77658 is a Power Management IC with 2 LDO regulators, 1 charger
+ and 1 fuel gauge.
+
+ MAX77659 is a Power Management IC with 1 LDO regulator and 1 charger.
+
+properties:
+ compatible:
+ enum:
+ - adi,max77643
+ - adi,max77654
+ - adi,max77658
+ - adi,max77659
+
+ reg:
+ description: I2C address of the PMIC
+ items:
+ - enum: [0x40, 0x48]
+
+ interrupts:
+ maxItems: 1
+
+ charger:
+ $ref: /schemas/power/supply/adi,max77658-charger.yaml
+
+ fuel-gauge:
+ $ref: /schemas/power/supply/adi,max77658-battery.yaml
+
+ regulators:
+ $ref: /schemas/regulator/adi,max77658-regulator.yaml
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,max77643
+ - adi,max77654
+ - adi,max77658
+
+ then:
+ properties:
+ reg:
+ items:
+ - const: 0x48
+
+ else:
+ properties:
+ reg:
+ items:
+ - const: 0x40
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ battery: battery-cell {
+ compatible = "simple-battery";
+ alert-celsius = <0 100>;
+ constant-charge-current-max-microamp = <15000>;
+ };
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic@48 {
+ compatible = "adi,max77643";
+ reg = <0x48>;
+ interrupt-parent = <&gpio>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ regulators {
+ LDO0 {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic@48 {
+ compatible = "adi,max77654";
+ reg = <0x48>;
+ interrupt-parent = <&gpio>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ charger {
+ compatible = "adi,max77654-charger";
+ monitored-battery = <&battery>;
+ adi,fast-charge-timer = <5>;
+ adi,topoff-timer = <30>;
+ adi,input-current-limit-microamp = <475000>;
+ };
+ regulators {
+ LDO0 {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO1 {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic@48 {
+ compatible = "adi,max77658";
+ reg = <0x48>;
+ interrupt-parent = <&gpio>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ charger {
+ compatible = "adi,max77658-charger";
+ monitored-battery = <&battery>;
+ adi,fast-charge-timer = <5>;
+ adi,topoff-timer = <30>;
+ adi,input-current-limit-microamp = <475000>;
+ };
+ regulators {
+ LDO0 {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ LDO1 {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ fuel-gauge {
+ compatible = "adi,max77658-battery";
+ monitored-battery = <&battery>;
+ adi,valrt-min-microvolt = <0>;
+ adi,valrt-max-microvolt = <5100000>;
+ adi,salrt-min-percent = <1>;
+ adi,salrt-max-percent = <99>;
+ adi,ialrt-min-microamp = <(-5000)>;
+ adi,ialrt-max-microamp = <5000>;
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic@40 {
+ compatible = "adi,max77659";
+ reg = <0x40>;
+ interrupt-parent = <&gpio>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ charger {
+ compatible = "adi,max77659-charger";
+ monitored-battery = <&battery>;
+ adi,fast-charge-timer = <5>;
+ adi,topoff-timer = <30>;
+ };
+ regulators {
+ LDO0 {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+ };
--
2.25.1
next prev parent reply other threads:[~2023-03-22 5:59 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-22 5:56 [PATCH v2 0/8] Add MAX77643/MAX77654/MAX77658/MAX77659 PMIC Support Zeynep Arslanbenzer
2023-03-22 5:56 ` [PATCH v2 1/8] dt-bindings: regulator: max77658: Add ADI MAX77643/54/58/59 Regulator Zeynep Arslanbenzer
2023-03-22 8:24 ` Krzysztof Kozlowski
2023-03-22 5:56 ` [PATCH v2 2/8] regulator: max77658: Add ADI MAX77643/54/58/59 Regulator Support Zeynep Arslanbenzer
2023-03-22 8:25 ` Krzysztof Kozlowski
2023-05-02 6:32 ` Arslanbenzer, Zeynep
2023-05-02 6:36 ` Krzysztof Kozlowski
2023-05-04 10:36 ` Arslanbenzer, Zeynep
2023-05-04 10:45 ` Krzysztof Kozlowski
2023-03-22 5:56 ` [PATCH v2 3/8] dt-bindings: power: supply: max77658: Add ADI MAX77654/58/59 Charger Zeynep Arslanbenzer
2023-03-22 8:26 ` Krzysztof Kozlowski
2023-04-17 10:12 ` Arslanbenzer, Zeynep
2023-03-22 5:56 ` [PATCH v2 4/8] power: supply: max77658: Add ADI MAX77654/58/59 Charger Support Zeynep Arslanbenzer
2023-03-22 5:56 ` [PATCH v2 5/8] dt-bindings: power: supply: max77658: Add ADI MAX77658 Battery Zeynep Arslanbenzer
2023-03-22 8:30 ` Krzysztof Kozlowski
2023-05-01 20:20 ` Arslanbenzer, Zeynep
2023-05-02 6:33 ` Krzysztof Kozlowski
2023-05-02 15:05 ` Arslanbenzer, Zeynep
2023-05-02 17:13 ` Krzysztof Kozlowski
2023-03-22 5:56 ` [PATCH v2 6/8] power: supply: max77658: Add ADI MAX77658 Battery Support Zeynep Arslanbenzer
2023-03-22 5:56 ` Zeynep Arslanbenzer [this message]
2023-03-22 8:33 ` [PATCH v2 7/8] dt-bindings: mfd: max77658: Add ADI MAX77658 Krzysztof Kozlowski
2023-03-22 5:56 ` [PATCH v2 8/8] mfd: max77658: Add ADI MAX77643/54/58/59 MFD Support Zeynep Arslanbenzer
2023-03-30 12:31 ` Lee Jones
2023-04-17 9:44 ` Arslanbenzer, Zeynep
2023-04-23 21:16 ` Arslanbenzer, Zeynep
2023-04-24 8:59 ` Lee Jones
2023-04-25 22:03 ` Arslanbenzer, Zeynep
2023-04-26 14:32 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230322055628.4441-8-Zeynep.Arslanbenzer@analog.com \
--to=zeynep.arslanbenzer@analog.com \
--cc=Nurettin.Bolucu@analog.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®