From: Liu Shixin <liushixin2@huawei.com>
To: Seth Jennings <sjenning@redhat.com>,
Dan Streetman <ddstreet@ieee.org>,
Vitaly Wool <vitaly.wool@konsulko.com>,
Andrew Morton <akpm@linux-foundation.org>,
Nathan Chancellor <nathan@kernel.org>,
Christoph Hellwig <hch@lst.de>
Cc: <linux-kernel@vger.kernel.org>, <linux-mm@kvack.org>,
Liu Shixin <liushixin2@huawei.com>
Subject: [PATCH -next v6 2/2] mm/zswap: delay the initializaton of zswap
Date: Wed, 22 Mar 2023 18:20:06 +0800 [thread overview]
Message-ID: <20230322102006.780624-3-liushixin2@huawei.com> (raw)
In-Reply-To: <20230322102006.780624-1-liushixin2@huawei.com>
Since some users may not use zswap, the zswap_pool is wasted. Save memory
by delaying the initialization of zswap until enabled.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
---
mm/zswap.c | 51 +++++++++++++++++++++++++++++++++++++++++----------
1 file changed, 41 insertions(+), 10 deletions(-)
diff --git a/mm/zswap.c b/mm/zswap.c
index 09fa956920fa..3aed3b26524a 100644
--- a/mm/zswap.c
+++ b/mm/zswap.c
@@ -81,6 +81,8 @@ static bool zswap_pool_reached_full;
#define ZSWAP_PARAM_UNSET ""
+static int zswap_setup(void);
+
/* Enable/disable zswap */
static bool zswap_enabled = IS_ENABLED(CONFIG_ZSWAP_DEFAULT_ON);
static int zswap_enabled_param_set(const char *,
@@ -220,6 +222,9 @@ static bool zswap_init_started;
/* fatal error during init */
static bool zswap_init_failed;
+/* used to ensure the integrity of initialization */
+static DEFINE_MUTEX(zswap_init_lock);
+
/* init completed, but couldn't create the initial pool */
static bool zswap_has_pool;
@@ -272,13 +277,13 @@ static void zswap_update_total_size(void)
**********************************/
static struct kmem_cache *zswap_entry_cache;
-static int __init zswap_entry_cache_create(void)
+static int zswap_entry_cache_create(void)
{
zswap_entry_cache = KMEM_CACHE(zswap_entry, 0);
return zswap_entry_cache == NULL;
}
-static void __init zswap_entry_cache_destroy(void)
+static void zswap_entry_cache_destroy(void)
{
kmem_cache_destroy(zswap_entry_cache);
}
@@ -663,7 +668,7 @@ static struct zswap_pool *zswap_pool_create(char *type, char *compressor)
return NULL;
}
-static __init struct zswap_pool *__zswap_pool_create_fallback(void)
+static struct zswap_pool *__zswap_pool_create_fallback(void)
{
bool has_comp, has_zpool;
@@ -784,8 +789,15 @@ static int __zswap_param_set(const char *val, const struct kernel_param *kp,
/* if this is load-time (pre-init) param setting,
* don't create a pool; that's done during init.
*/
- if (!zswap_init_started)
- return param_set_charp(s, kp);
+ if (!zswap_init_started) {
+ mutex_lock(&zswap_init_lock);
+ if (!zswap_init_started) {
+ ret = param_set_charp(s, kp);
+ mutex_unlock(&zswap_init_lock);
+ return ret;
+ }
+ mutex_unlock(&zswap_init_lock);
+ }
if (!type) {
if (!zpool_has_pool(s)) {
@@ -884,6 +896,15 @@ static int zswap_enabled_param_set(const char *val,
if (res == *(bool *)kp->arg)
return 0;
+ if (!zswap_init_started && (system_state == SYSTEM_RUNNING)) {
+ mutex_lock(&zswap_init_lock);
+ if (zswap_setup()) {
+ mutex_unlock(&zswap_init_lock);
+ return -ENODEV;
+ }
+ mutex_unlock(&zswap_init_lock);
+ }
+
if (zswap_init_failed) {
pr_err("can't enable, initialization failed\n");
return -ENODEV;
@@ -1451,7 +1472,7 @@ static const struct frontswap_ops zswap_frontswap_ops = {
static struct dentry *zswap_debugfs_root;
-static int __init zswap_debugfs_init(void)
+static int zswap_debugfs_init(void)
{
if (!debugfs_initialized())
return -ENODEV;
@@ -1482,7 +1503,7 @@ static int __init zswap_debugfs_init(void)
return 0;
}
#else
-static int __init zswap_debugfs_init(void)
+static int zswap_debugfs_init(void)
{
return 0;
}
@@ -1491,12 +1512,13 @@ static int __init zswap_debugfs_init(void)
/*********************************
* module init and exit
**********************************/
-static int __init init_zswap(void)
+static int zswap_setup(void)
{
struct zswap_pool *pool;
int ret;
- zswap_init_started = true;
+ if (zswap_init_started)
+ return 0;
if (zswap_entry_cache_create()) {
pr_err("entry cache creation failed\n");
@@ -1537,6 +1559,7 @@ static int __init init_zswap(void)
goto destroy_wq;
if (zswap_debugfs_init())
pr_warn("debugfs initialization failed\n");
+ zswap_init_started = true;
return 0;
destroy_wq:
@@ -1551,11 +1574,19 @@ static int __init init_zswap(void)
cache_fail:
/* if built-in, we aren't unloaded on failure; don't allow use */
zswap_init_failed = true;
+ zswap_init_started = true;
zswap_enabled = false;
return -ENOMEM;
}
+
+static int __init zswap_init(void)
+{
+ if (!zswap_enabled)
+ return 0;
+ return zswap_setup();
+}
/* must be late so crypto has time to come up */
-late_initcall(init_zswap);
+late_initcall(zswap_init);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Seth Jennings <sjennings@variantweb.net>");
--
2.25.1
next prev parent reply other threads:[~2023-03-22 9:30 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-22 10:20 [PATCH -next v6 0/2] Delay the initialization " Liu Shixin
2023-03-22 10:20 ` [PATCH -next v6 1/2] mm/zswap: skip invalid or unchanged parameter Liu Shixin
2023-03-22 10:20 ` Liu Shixin [this message]
2023-03-22 17:17 ` [PATCH -next v6 2/2] mm/zswap: delay the initializaton of zswap Vitaly Wool
2023-03-23 7:59 ` Christoph Hellwig
2023-03-27 6:19 ` Vitaly Wool
2023-03-23 8:04 ` Christoph Hellwig
2023-03-24 9:03 ` Liu Shixin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230322102006.780624-3-liushixin2@huawei.com \
--to=liushixin2@huawei.com \
--cc=akpm@linux-foundation.org \
--cc=ddstreet@ieee.org \
--cc=hch@lst.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=nathan@kernel.org \
--cc=sjenning@redhat.com \
--cc=vitaly.wool@konsulko.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®