From: Siddharth Vadapalli <s-vadapalli@ti.com>
To: <davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
<linux@armlinux.org.uk>, <pabeni@redhat.com>, <rogerq@kernel.org>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <srk@ti.com>,
<s-vadapalli@ti.com>
Subject: [PATCH net-next 2/2] net: ethernet: ti: am65-cpsw: Enable USXGMII mode for J784S4 CPSW9G
Date: Fri, 31 Mar 2023 12:21:10 +0530 [thread overview]
Message-ID: <20230331065110.604516-3-s-vadapalli@ti.com> (raw)
In-Reply-To: <20230331065110.604516-1-s-vadapalli@ti.com>
TI's J784S4 SoC supports USXGMII mode. Add USXGMII mode to the
extra_modes member of the J784S4 SoC data. Additionally, configure the
MAC Control register for supporting USXGMII mode. Also, for USXGMII
mode, include MAC_5000FD in the "mac_capabilities" member of struct
"phylink_config".
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
drivers/net/ethernet/ti/am65-cpsw-nuss.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
index 4b4d06199b45..ab33e6fe5b1a 100644
--- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
+++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
@@ -1555,6 +1555,8 @@ static void am65_cpsw_nuss_mac_link_up(struct phylink_config *config, struct phy
mac_control |= CPSW_SL_CTL_GIG;
if (interface == PHY_INTERFACE_MODE_SGMII)
mac_control |= CPSW_SL_CTL_EXT_EN;
+ if (interface == PHY_INTERFACE_MODE_USXGMII)
+ mac_control |= CPSW_SL_CTL_XGIG | CPSW_SL_CTL_XGMII_EN;
if (speed == SPEED_10 && phy_interface_mode_is_rgmii(interface))
/* Can be used with in band mode only */
mac_control |= CPSW_SL_CTL_EXT_EN;
@@ -2175,6 +2177,7 @@ am65_cpsw_nuss_init_port_ndev(struct am65_cpsw_common *common, u32 port_idx)
case PHY_INTERFACE_MODE_QSGMII:
case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_USXGMII:
if (common->pdata.extra_modes & BIT(port->slave.phy_if)) {
__set_bit(port->slave.phy_if,
port->slave.phylink_config.supported_interfaces);
@@ -2182,6 +2185,9 @@ am65_cpsw_nuss_init_port_ndev(struct am65_cpsw_common *common, u32 port_idx)
dev_err(dev, "selected phy-mode is not supported\n");
return -EOPNOTSUPP;
}
+ /* For USXGMII mode, enable MAC_5000FD */
+ if (port->slave.phy_if == PHY_INTERFACE_MODE_USXGMII)
+ port->slave.phylink_config.mac_capabilities |= MAC_5000FD;
break;
default:
@@ -2800,7 +2806,7 @@ static const struct am65_cpsw_pdata j784s4_cpswxg_pdata = {
.quirks = 0,
.ale_dev_id = "am64-cpswxg",
.fdqring_mode = K3_RINGACC_RING_MODE_MESSAGE,
- .extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII),
+ .extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII) | BIT(PHY_INTERFACE_MODE_USXGMII),
};
static const struct of_device_id am65_cpsw_nuss_of_mtable[] = {
--
2.25.1
next prev parent reply other threads:[~2023-03-31 6:51 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-31 6:51 [PATCH net-next 0/2] Add support " Siddharth Vadapalli
2023-03-31 6:51 ` [PATCH net-next 1/2] net: ethernet: ti: am65-cpsw: Enable QSGMII " Siddharth Vadapalli
2023-03-31 6:51 ` Siddharth Vadapalli [this message]
2023-03-31 7:57 ` [PATCH net-next 2/2] net: ethernet: ti: am65-cpsw: Enable USXGMII mode " Russell King (Oracle)
2023-03-31 8:05 ` Siddharth Vadapalli
2023-03-31 8:24 ` Russell King (Oracle)
2023-03-31 9:25 ` Siddharth Vadapalli
2023-03-31 9:46 ` Russell King (Oracle)
2023-03-31 10:53 ` Siddharth Vadapalli
2023-03-31 11:12 ` Russell King (Oracle)
2023-03-31 13:46 ` Siddharth Vadapalli
2023-04-03 6:27 ` Siddharth Vadapalli
2023-04-03 8:32 ` Russell King (Oracle)
2023-04-03 8:41 ` Siddharth Vadapalli
2023-04-03 8:59 ` Russell King (Oracle)
2023-04-03 9:49 ` Siddharth Vadapalli
2023-04-03 9:57 ` Russell King (Oracle)
2023-04-03 10:00 ` Siddharth Vadapalli
2023-03-31 7:46 ` [PATCH net-next 0/2] Add support " Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230331065110.604516-3-s-vadapalli@ti.com \
--to=s-vadapalli@ti.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=rogerq@kernel.org \
--cc=srk@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®