[PATCH RFC v4 3/7] drm/atomic: Move framebuffer checks to helper

[Jessica Zhang <quic_jesszhan@quicinc.com>]

Currently framebuffer checks happen directly in
drm_atomic_plane_check(). Move these checks into their own helper
method.

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
---
 drivers/gpu/drm/drm_atomic.c | 130 ++++++++++++++++++++++++-------------------
 1 file changed, 74 insertions(+), 56 deletions(-)

diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index b4c6ffc438da..404b984d2d9f 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -580,6 +580,76 @@ plane_switching_crtc(const struct drm_plane_state *old_plane_state,
 	return true;
 }
 
+static int drm_atomic_check_fb(const struct drm_plane_state *state)
+{
+	struct drm_plane *plane = state->plane;
+	const struct drm_framebuffer *fb = state->fb;
+	struct drm_mode_rect *clips;
+
+	uint32_t num_clips;
+	unsigned int fb_width, fb_height;
+	int ret;
+
+	/* Check whether this plane supports the fb pixel format. */
+	ret = drm_plane_check_pixel_format(plane, fb->format->format,
+					   fb->modifier);
+
+	if (ret) {
+		drm_dbg_atomic(plane->dev,
+			       "[PLANE:%d:%s] invalid pixel format %p4cc, modifier 0x%llx\n",
+			       plane->base.id, plane->name,
+			       &fb->format->format, fb->modifier);
+		return ret;
+	}
+
+	fb_width = fb->width << 16;
+	fb_height = fb->height << 16;
+
+	/* Make sure source coordinates are inside the fb. */
+	if (state->src_w > fb_width ||
+	    state->src_x > fb_width - state->src_w ||
+	    state->src_h > fb_height ||
+	    state->src_y > fb_height - state->src_h) {
+		drm_dbg_atomic(plane->dev,
+			       "[PLANE:%d:%s] invalid source coordinates "
+			       "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n",
+			       plane->base.id, plane->name,
+			       state->src_w >> 16,
+			       ((state->src_w & 0xffff) * 15625) >> 10,
+			       state->src_h >> 16,
+			       ((state->src_h & 0xffff) * 15625) >> 10,
+			       state->src_x >> 16,
+			       ((state->src_x & 0xffff) * 15625) >> 10,
+			       state->src_y >> 16,
+			       ((state->src_y & 0xffff) * 15625) >> 10,
+			       fb->width, fb->height);
+		return -ENOSPC;
+	}
+
+	clips = __drm_plane_get_damage_clips(state);
+	num_clips = drm_plane_get_damage_clips_count(state);
+
+	/* Make sure damage clips are valid and inside the fb. */
+	while (num_clips > 0) {
+		if (clips->x1 >= clips->x2 ||
+		    clips->y1 >= clips->y2 ||
+		    clips->x1 < 0 ||
+		    clips->y1 < 0 ||
+		    clips->x2 > fb_width ||
+		    clips->y2 > fb_height) {
+			drm_dbg_atomic(plane->dev,
+				       "[PLANE:%d:%s] invalid damage clip %d %d %d %d\n",
+				       plane->base.id, plane->name, clips->x1,
+				       clips->y1, clips->x2, clips->y2);
+			return -EINVAL;
+		}
+		clips++;
+		num_clips--;
+	}
+
+	return 0;
+}
+
 /**
  * drm_atomic_plane_check - check plane state
  * @old_plane_state: old plane state to check
@@ -596,9 +666,6 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
 	struct drm_plane *plane = new_plane_state->plane;
 	struct drm_crtc *crtc = new_plane_state->crtc;
 	const struct drm_framebuffer *fb = new_plane_state->fb;
-	unsigned int fb_width, fb_height;
-	struct drm_mode_rect *clips;
-	uint32_t num_clips;
 	int ret;
 
 	/* either *both* CRTC and FB must be set, or neither */
@@ -625,17 +692,6 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
 		return -EINVAL;
 	}
 
-	/* Check whether this plane supports the fb pixel format. */
-	ret = drm_plane_check_pixel_format(plane, fb->format->format,
-					   fb->modifier);
-	if (ret) {
-		drm_dbg_atomic(plane->dev,
-			       "[PLANE:%d:%s] invalid pixel format %p4cc, modifier 0x%llx\n",
-			       plane->base.id, plane->name,
-			       &fb->format->format, fb->modifier);
-		return ret;
-	}
-
 	/* Give drivers some help against integer overflows */
 	if (new_plane_state->crtc_w > INT_MAX ||
 	    new_plane_state->crtc_x > INT_MAX - (int32_t) new_plane_state->crtc_w ||
@@ -649,49 +705,11 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
 		return -ERANGE;
 	}
 
-	fb_width = fb->width << 16;
-	fb_height = fb->height << 16;
 
-	/* Make sure source coordinates are inside the fb. */
-	if (new_plane_state->src_w > fb_width ||
-	    new_plane_state->src_x > fb_width - new_plane_state->src_w ||
-	    new_plane_state->src_h > fb_height ||
-	    new_plane_state->src_y > fb_height - new_plane_state->src_h) {
-		drm_dbg_atomic(plane->dev,
-			       "[PLANE:%d:%s] invalid source coordinates "
-			       "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n",
-			       plane->base.id, plane->name,
-			       new_plane_state->src_w >> 16,
-			       ((new_plane_state->src_w & 0xffff) * 15625) >> 10,
-			       new_plane_state->src_h >> 16,
-			       ((new_plane_state->src_h & 0xffff) * 15625) >> 10,
-			       new_plane_state->src_x >> 16,
-			       ((new_plane_state->src_x & 0xffff) * 15625) >> 10,
-			       new_plane_state->src_y >> 16,
-			       ((new_plane_state->src_y & 0xffff) * 15625) >> 10,
-			       fb->width, fb->height);
-		return -ENOSPC;
-	}
-
-	clips = __drm_plane_get_damage_clips(new_plane_state);
-	num_clips = drm_plane_get_damage_clips_count(new_plane_state);
-
-	/* Make sure damage clips are valid and inside the fb. */
-	while (num_clips > 0) {
-		if (clips->x1 >= clips->x2 ||
-		    clips->y1 >= clips->y2 ||
-		    clips->x1 < 0 ||
-		    clips->y1 < 0 ||
-		    clips->x2 > fb_width ||
-		    clips->y2 > fb_height) {
-			drm_dbg_atomic(plane->dev,
-				       "[PLANE:%d:%s] invalid damage clip %d %d %d %d\n",
-				       plane->base.id, plane->name, clips->x1,
-				       clips->y1, clips->x2, clips->y2);
-			return -EINVAL;
-		}
-		clips++;
-		num_clips--;
+	if (fb) {
+		ret = drm_atomic_check_fb(new_plane_state);
+		if (ret)
+			return ret;
 	}
 
 	if (plane_switching_crtc(old_plane_state, new_plane_state)) {

-- 
2.41.0