From: Siddharth Vadapalli <s-vadapalli@ti.com>
To: <davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
<linux@armlinux.org.uk>, <pabeni@redhat.com>, <rogerq@kernel.org>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <srk@ti.com>,
<s-vadapalli@ti.com>
Subject: [PATCH net-next v3 1/3] net: ethernet: ti: am65-cpsw: Move mode specific config to mac_config()
Date: Tue, 4 Apr 2023 11:44:57 +0530 [thread overview]
Message-ID: <20230404061459.1100519-2-s-vadapalli@ti.com> (raw)
In-Reply-To: <20230404061459.1100519-1-s-vadapalli@ti.com>
Move the interface mode specific configuration to the mac_config()
callback am65_cpsw_nuss_mac_config().
Also, do not reset the MAC Control register on mac_link_down(). Only
clear those bits that can possibly be set in mac_link_up().
Let the MAC remain in IDLE state after mac_link_down(). Bring it out of
the IDLE state on mac_link_up().
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
drivers/net/ethernet/ti/am65-cpsw-nuss.c | 22 ++++++++++++++++++----
1 file changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
index d17757ecbf42..99d18eb6bbe9 100644
--- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
+++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
@@ -1506,9 +1506,13 @@ static void am65_cpsw_nuss_mac_config(struct phylink_config *config, unsigned in
struct am65_cpsw_common *common = port->common;
if (common->pdata.extra_modes & BIT(state->interface)) {
- if (state->interface == PHY_INTERFACE_MODE_SGMII)
+ if (state->interface == PHY_INTERFACE_MODE_SGMII) {
writel(ADVERTISE_SGMII,
port->sgmii_base + AM65_CPSW_SGMII_MR_ADV_ABILITY_REG);
+ cpsw_sl_ctl_set(port->slave.mac_sl, CPSW_SL_CTL_EXT_EN);
+ } else {
+ cpsw_sl_ctl_clr(port->slave.mac_sl, CPSW_SL_CTL_EXT_EN);
+ }
writel(AM65_CPSW_SGMII_CONTROL_MR_AN_ENABLE,
port->sgmii_base + AM65_CPSW_SGMII_CONTROL_REG);
@@ -1523,6 +1527,7 @@ static void am65_cpsw_nuss_mac_link_down(struct phylink_config *config, unsigned
struct am65_cpsw_port *port = container_of(slave, struct am65_cpsw_port, slave);
struct am65_cpsw_common *common = port->common;
struct net_device *ndev = port->ndev;
+ u32 mac_control;
int tmo;
/* disable forwarding */
@@ -1534,7 +1539,14 @@ static void am65_cpsw_nuss_mac_link_down(struct phylink_config *config, unsigned
dev_dbg(common->dev, "down msc_sl %08x tmo %d\n",
cpsw_sl_reg_read(port->slave.mac_sl, CPSW_SL_MACSTATUS), tmo);
- cpsw_sl_ctl_reset(port->slave.mac_sl);
+ /* All the bits that am65_cpsw_nuss_mac_link_up() can possibly set */
+ mac_control = CPSW_SL_CTL_GMII_EN | CPSW_SL_CTL_GIG | CPSW_SL_CTL_IFCTL_A |
+ CPSW_SL_CTL_FULLDUPLEX | CPSW_SL_CTL_RX_FLOW_EN | CPSW_SL_CTL_TX_FLOW_EN;
+ /* If interface mode is RGMII, CPSW_SL_CTL_EXT_EN might have been set for 10 Mbps */
+ if (phy_interface_mode_is_rgmii(interface))
+ mac_control |= CPSW_SL_CTL_EXT_EN;
+ /* Only clear those bits that can be set by am65_cpsw_nuss_mac_link_up() */
+ cpsw_sl_ctl_clr(port->slave.mac_sl, mac_control);
am65_cpsw_qos_link_down(ndev);
netif_tx_stop_all_queues(ndev);
@@ -1551,10 +1563,12 @@ static void am65_cpsw_nuss_mac_link_up(struct phylink_config *config, struct phy
u32 mac_control = CPSW_SL_CTL_GMII_EN;
struct net_device *ndev = port->ndev;
+ /* Bring the port out of idle state */
+ cpsw_sl_ctl_clr(port->slave.mac_sl, CPSW_SL_CTL_CMD_IDLE);
+
if (speed == SPEED_1000)
mac_control |= CPSW_SL_CTL_GIG;
- if (interface == PHY_INTERFACE_MODE_SGMII)
- mac_control |= CPSW_SL_CTL_EXT_EN;
+ /* TODO: Verify whether in-band is necessary for 10 Mbps RGMII */
if (speed == SPEED_10 && phy_interface_mode_is_rgmii(interface))
/* Can be used with in band mode only */
mac_control |= CPSW_SL_CTL_EXT_EN;
--
2.25.1
next prev parent reply other threads:[~2023-04-04 6:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-04 6:14 [PATCH net-next v3 0/3] Add support for J784S4 CPSW9G Siddharth Vadapalli
2023-04-04 6:14 ` Siddharth Vadapalli [this message]
2023-04-04 6:14 ` [PATCH net-next v3 2/3] net: ethernet: ti: am65-cpsw: Enable QSGMII " Siddharth Vadapalli
2023-04-04 11:38 ` Roger Quadros
2023-04-04 6:14 ` [PATCH net-next v3 3/3] net: ethernet: ti: am65-cpsw: Enable USXGMII mode " Siddharth Vadapalli
2023-04-08 2:50 ` [PATCH net-next v3 0/3] Add support " patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230404061459.1100519-2-s-vadapalli@ti.com \
--to=s-vadapalli@ti.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=rogerq@kernel.org \
--cc=srk@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®