From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Martin Kepplinger <martin.kepplinger@puri.sm>
Cc: mchehab@kernel.org, kernel@puri.sm, linux-media@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 2/2] media: hi846: preserve the streaming state during system suspend
Date: Thu, 6 Apr 2023 04:35:51 +0300 [thread overview]
Message-ID: <20230406013551.GL9915@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20230405092904.1129395-3-martin.kepplinger@puri.sm>
Hi Martin,
Thank you for the patch.
On Wed, Apr 05, 2023 at 11:29:04AM +0200, Martin Kepplinger wrote:
> The hi846 driver changed the "streaming" state inside of "start/stop_streaming".
> The problem is that inside of the (system) suspend callback, it calls
> "stop_streaming" unconditionally. So streaming would always be stopped
> when suspending.
>
> That makes sense with runtime pm for example, after s_stream(..., 0) but
> does not preserve the "streaming" state during system suspend when
> currently streaming.
The driver shouldn't need to stop streaming at system suspend time. It
should have had its .s_stream(0) operation called and shouldn't be
streaming anymore. If that's not the case, there's an issue somewhere
else, which should be fixed. The code that stops streaming at system
suspend and restarts it at system resume should then be dropped from
this driver.
> Fix this by simply setting the streaming state outside of "start/stop_streaming"
> which is s_stream().
>
> While at it, improve things a bit by not assigning "1", but the "enable"
> value we later compare against, and fix one error handling path in resume().
>
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> ---
> drivers/media/i2c/hi846.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/i2c/hi846.c b/drivers/media/i2c/hi846.c
> index 0b0eda2e223cd..1ca6e9407d618 100644
> --- a/drivers/media/i2c/hi846.c
> +++ b/drivers/media/i2c/hi846.c
> @@ -1780,8 +1780,6 @@ static int hi846_start_streaming(struct hi846 *hi846)
> return ret;
> }
>
> - hi846->streaming = 1;
> -
> dev_dbg(&client->dev, "%s: started streaming successfully\n", __func__);
>
> return ret;
> @@ -1793,8 +1791,6 @@ static void hi846_stop_streaming(struct hi846 *hi846)
>
> if (hi846_write_reg(hi846, HI846_REG_MODE_SELECT, HI846_MODE_STANDBY))
> dev_err(&client->dev, "failed to stop stream");
> -
> - hi846->streaming = 0;
> }
>
> static int hi846_set_stream(struct v4l2_subdev *sd, int enable)
> @@ -1816,10 +1812,12 @@ static int hi846_set_stream(struct v4l2_subdev *sd, int enable)
> }
>
> ret = hi846_start_streaming(hi846);
> + hi846->streaming = enable;
> }
>
> if (!enable || ret) {
> hi846_stop_streaming(hi846);
> + hi846->streaming = 0;
> pm_runtime_put(&client->dev);
> }
>
> @@ -1898,6 +1896,8 @@ static int __maybe_unused hi846_resume(struct device *dev)
> if (ret) {
> dev_err(dev, "%s: start streaming failed: %d\n",
> __func__, ret);
> + hi846_stop_streaming(hi846);
> + hi846->streaming = 0;
> goto error;
> }
> }
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2023-04-06 1:35 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-05 9:29 [PATCH v1 0/2] media: hi846: support system suspend while streaming Martin Kepplinger
2023-04-05 9:29 ` [PATCH v1 1/2] media: hi846: fix usage of pm_runtime_get_if_in_use() Martin Kepplinger
2023-04-05 12:52 ` Sakari Ailus
2023-04-06 1:33 ` Laurent Pinchart
2023-04-06 13:36 ` Sakari Ailus
2023-04-07 4:32 ` Laurent Pinchart
2023-04-07 13:31 ` Martin Kepplinger
2023-04-07 18:37 ` Sakari Ailus
2023-04-06 1:32 ` Laurent Pinchart
2023-04-05 9:29 ` [PATCH v1 2/2] media: hi846: preserve the streaming state during system suspend Martin Kepplinger
2023-04-06 1:35 ` Laurent Pinchart [this message]
2023-04-11 9:39 ` Martin Kepplinger
2023-04-11 11:15 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230406013551.GL9915@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=kernel@puri.sm \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=martin.kepplinger@puri.sm \
--cc=mchehab@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®