mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Xingui Yang <yangxingui@huawei.com>
To: <jejb@linux.ibm.com>, <martin.petersen@oracle.com>,
	<john.g.garry@oracle.com>
Cc: <linux-scsi@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linuxarm@huawei.com>, <yangxingui@huawei.com>,
	<prime.zeng@hisilicon.com>, <kangfenglong@huawei.com>
Subject: [PATCH] scsi: libsas: set tf to normal in sas_ata_device_link_abort()
Date: Fri, 7 Apr 2023 03:56:18 +0000	[thread overview]
Message-ID: <20230407035618.25123-1-yangxingui@huawei.com> (raw)

If the disk returns UNC for more than five times within a short period, the
number of retry times for other I/Os may reach scmd->allowed, and the
default error "Illegal Request" is returned for other I/Os, as follows:

[  273.801770] hisi_sas_v3_hw 0000:b4:02.0: erroneous completion disk err dev id=2 sas_addr=0x5000000000000605 CQ hdr: 0x400903 0x20103 0x0 0x80470000
[  273.875286] sas: Enter sas_scsi_recover_host busy: 30 failed: 30
[  273.879895] sas: trying to find task 0x00000000d9cfc893
[  273.879896] sas: sas_scsi_find_task: aborting task 0x00000000d9cfc893
[  273.880054] sas: sas_scsi_find_task: task 0x00000000d9cfc893 is done
[  273.880055] sas: sas_eh_handle_sas_errors: task 0x00000000d9cfc893 is done
[  273.880236] ata6.00: failed command: READ FPDMA QUEUED
[  273.880238] ata6.00: cmd 60/08:00:59:27:00/00:00:00:00:00/40 tag 22 ncq dma 4096 in
                        res 41/04:00:20:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  273.880239] ata6.00: status: { DRDY ERR }
[  273.880240] ata6.00: error: { ABRT }
[  273.880241] ata6.00: failed command: READ FPDMA QUEUED
[  273.880243] ata6.00: cmd 60/90:00:d1:26:00/00:00:00:00:00/40 tag 23 ncq dma 73728 in
                        res 41/40:90:10:27:00/00:00:00:00:00/00 Emask 0x409 (media error) <F>
[  273.880245] ata6.00: status: { DRDY ERR }
[  273.880246] ata6.00: error: { UNC }
[  273.880247] ata6.00: failed command: READ FPDMA QUEUED
[  273.880249] ata6.00: cmd 60/08:00:19:27:00/00:00:00:00:00/40 tag 24 ncq dma 4096 in
                        res 41/04:00:20:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[  273.880250] ata6.00: status: { DRDY ERR }
[  273.880251] ata6.00: error: { ABRT }
[  274.199477] scmd->retries: 3, scmd->allowed: 5
[  274.199478] scmd->retries: 3, scmd->allowed: 5
[  274.199479] scmd->retries: 3, scmd->allowed: 5
[  274.199481] scmd->retries: 3, scmd->allowed: 5
[  274.199482] scmd->retries: 3, scmd->allowed: 5
[  274.199483] scmd->retries: 2, scmd->allowed: 5
[  274.199484] scmd->retries: 3, scmd->allowed: 5
[  274.199485] scmd->retries: 3, scmd->allowed: 5
[  274.199486] scmd->retries: 5, scmd->allowed: 5
[  274.199487] scmd->retries: 2, scmd->allowed: 5
[  274.199488] scmd->retries: 2, scmd->allowed: 5
[  274.199524] sd 6:0:1:0: [sdb] tag#258 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  274.199527] sd 6:0:1:0: [sdb] tag#258 Sense Key : Illegal Request [current]
[  274.199530] sd 6:0:1:0: [sdb] tag#258 Add. Sense: Unaligned write command
[  274.199532] sd 6:0:1:0: [sdb] tag#258 CDB: Read(10) 28 00 00 00 27 59 00 00 08 00
[  274.199535] print_req_error: I/O error, dev sdb, sector 10073
[  274.199573] sd 6:0:1:0: [sdb] tag#259 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[  274.199574] sd 6:0:1:0: [sdb] tag#259 Sense Key : Medium Error [current]
[  274.199576] sd 6:0:1:0: [sdb] tag#259 Add. Sense: Unrecovered read error - auto reallocate failed
[  274.199578] sd 6:0:1:0: [sdb] tag#259 CDB: Read(10) 28 00 00 00 26 d1 00 00 90 00
[  274.199579] print_req_error: I/O error, dev sdb, sector 10000
[  274.199608] ata6: EH complete
[  274.199615] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 30 tries: 1

As mentioned in ata_eh_qc_retry(), if qc->err_mask is zero then increment
scmd->allowed. So set tf to normal may be better.

Signed-off-by: Xingui Yang <yangxingui@huawei.com>
---
 drivers/scsi/libsas/sas_ata.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index 77714a495cbb..f5047e8dcb59 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -949,8 +949,8 @@ void sas_ata_device_link_abort(struct domain_device *device, bool force_reset)
 	unsigned long flags;
 
 	spin_lock_irqsave(ap->lock, flags);
-	device->sata_dev.fis[2] = ATA_ERR | ATA_DRDY; /* tf status */
-	device->sata_dev.fis[3] = ATA_ABORTED; /* tf error */
+	device->sata_dev.fis[2] = ATA_DRDY; /* tf status */
+	device->sata_dev.fis[3] = 0;        /* tf error */
 
 	link->eh_info.err_mask |= AC_ERR_DEV;
 	if (force_reset)
-- 
2.17.1


             reply	other threads:[~2023-04-07  4:04 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-07  3:56 Xingui Yang [this message]
2023-04-14  7:36 ` Jason Yan
2023-04-17  8:18   ` yangxingui
2023-04-26  1:41     ` Jason Yan
2023-04-28  8:01       ` yangxingui

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230407035618.25123-1-yangxingui@huawei.com \
    --to=yangxingui@huawei.com \
    --cc=jejb@linux.ibm.com \
    --cc=john.g.garry@oracle.com \
    --cc=kangfenglong@huawei.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=martin.petersen@oracle.com \
    --cc=prime.zeng@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®