From: Haibo Li <haibo.li@mediatek.com>
To: <linus.walleij@linaro.org>
Cc: <a.anurag@samsung.com>, <alexander.sverdlin@nokia.com>,
<angelogioacchino.delregno@collabora.com>, <ardb@kernel.org>,
<catalin.marinas@arm.com>, <haibo.li@mediatek.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>, <linux@armlinux.org.uk>,
<matthias.bgg@gmail.com>, <rmk+kernel@armlinux.org.uk>,
<xiaoming.yu@mediatek.com>
Subject: Re: [PATCH] ARM:unwind:fix unwind abort for uleb128 case
Date: Wed, 12 Apr 2023 10:44:06 +0800 [thread overview]
Message-ID: <20230412024406.62187-1-haibo.li@mediatek.com> (raw)
In-Reply-To: <CACRpkda8qTuCmF_RDjtp26k_DMpME=0wAPjejh4ODkUr9SxVqg@mail.gmail.com>
> On Fri, Apr 7, 2023 at 5:33 AM Haibo Li <haibo.li@mediatek.com> wrote:
>
> > When unwind instruction is 0xb2,the subsequent instructions
> > are uleb128 bytes.
> > For now,it uses only the first uleb128 byte in code.
> >
> > For vsp increments of 0x204~0x400,use one uleb128 byte like below:
> > 0xc06a00e4 <unwind_test_work>: 0x80b27fac
> > Compact model index: 0
> > 0xb2 0x7f vsp = vsp + 1024
> > 0xac pop {r4, r5, r6, r7, r8, r14}
> >
> > For vsp increments larger than 0x400,use two uleb128 bytes like below:
> > 0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
> > Compact model index: 1
> > 0xb2 0x81 0x01 vsp = vsp + 1032
> > 0xac pop {r4, r5, r6, r7, r8, r14}
> > The unwind works well since the decoded uleb128 byte is also 0x81.
> >
> > For vsp increments larger than 0x600,use two uleb128 bytes like below:
> > 0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
> > Compact model index: 1
> > 0xb2 0x81 0x02 vsp = vsp + 1544
> > 0xac pop {r4, r5, r6, r7, r8, r14}
> > In this case,the decoded uleb128 result is 0x101(vsp=0x204+(0x101<<2)).
> > While the uleb128 used in code is 0x81(vsp=0x204+(0x81<<2)).
> > The unwind aborts at this frame since it gets incorrect vsp.
> >
> > To fix this,add uleb128 decode to cover all the above case.
> >
> > Signed-off-by: Haibo Li <haibo.li@mediatek.com>
>
> [Added people such as Catalin, Ard and Anurag who wrote the lion's
> share of actual algorithms in this file]
>
> I would just link the wikipedia in the patch commit log actually:
>
> Link:https://en.wikipedia.org/wiki/LEB128
>
> for poor souls like me who need a primer on this encoding.
>
> It's great if you also have a reference to the spec where you
> found this, but I take your word for that this appears in code.
> Did compilers always emit this? Then we should have a Cc stable
> to this patch. Unfortunately the link in the top of the file is dead.
Yes.I also study uleb128 enc/dec format from this link.
In experiment,Both Clang and GCC produces unwind instructions using ULEB128
>
> > +static unsigned long unwind_decode_uleb128(struct unwind_ctrl_block
> *ctrl)
>
> So this decodes max an unsigned long? Are we sure that will always
> suffice?
For now,the maximum thread size of arm is 16KB(KASAN on).
From below experiment(worse case while impossible),two uleb128 bytes is sufficent for 16KB stack.
0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
Compact model index: 1
0xb2 0xff 0x1e vsp = vsp + 16384
0xac pop {r4, r5, r6, r7, r8, r14}
From below experiment,the code picks maximum 4 uleb128 encoded bytes,
correspoding to vsp increments of 1073742336,the unwind_decode_uleb128 returns 0xFFFFFFF.
So unsigned long is suffice.
0xc06a00e4 <unwind_test_work>: @0xc0cc9e0c
Compact model index: 1
0xb2 0xff 0xff 0xff 0x7f vsp = vsp + 1073742336
0xac pop {r4, r5, r6, r7, r8, r14}
>
> > +{
> > + unsigned long result = 0;
> > + unsigned long insn;
> > + unsigned long bytes = 0;
> > +
> > + do {
> > + insn = unwind_get_byte(ctrl);
> > + result |= (insn & 0x7f) << (bytes * 7);
> > + bytes++;
> > + if (bytes == sizeof(result))
> > + break;
> > + } while (!!(insn & 0x80));
>
> I suppose the documentation is in the commit message, but something terse
> and nice that make us understand this code would be needed here as well.
> Could you fold in a comment of how the do {} while-loop works and th expected
> outcome? Something like:
>
> "unwind_get_byte() will advance ctrl one instruction at a time, we loop
> until we get an instruction byte where bit 7 is not set."
>
I will add a comment in later patch.
> Is there a risk that this will loop forever or way too long if it happens
> to point at some corrupted memory containing say 0xff 0xff 0xff ...?
>
> Since we're decoding a 32 bit unsigned long maybe break the loop after max
> 5 bytes (35 bits)? Or are we sure this will not happen?
in case of some corrupted memory containing say 0xff 0xff 0xff ...,the loop breaks after
max 4 bytes(decode as max 28 bits)
>
> > @@ -361,7 +376,7 @@ static int unwind_exec_insn(struct
> unwind_ctrl_block *ctrl)
> > if (ret)
> > goto error;
> > } else if (insn == 0xb2) {
> > - unsigned long uleb128 = unwind_get_byte(ctrl);
> > + unsigned long uleb128 = unwind_decode_uleb128(ctrl);
>
> Is unsigned long always enough? We are sure?
For the patch,it can cover single frame up to 1073742336 Bytes.So it is enough.
>
> Yours,
> Linus Walleij
next prev parent reply other threads:[~2023-04-12 2:44 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-07 3:33 Haibo Li
2023-04-11 21:31 ` Linus Walleij
2023-04-12 2:44 ` Haibo Li [this message]
2023-04-12 12:25 ` Linus Walleij
2023-04-12 12:43 ` Alexandre Mergnat
2023-04-13 7:19 ` Haibo Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230412024406.62187-1-haibo.li@mediatek.com \
--to=haibo.li@mediatek.com \
--cc=a.anurag@samsung.com \
--cc=alexander.sverdlin@nokia.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=ardb@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=matthias.bgg@gmail.com \
--cc=rmk+kernel@armlinux.org.uk \
--cc=xiaoming.yu@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®