mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Esteban Blanc <eblanc@baylibre.com>
To: nm@ti.com, vigneshr@ti.com, kristo@kernel.org,
	robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, sterzik@ti.com, u-kumar1@ti.com,
	eblanc@baylibre.com, jneanne@baylibre.com, jpanis@baylibre.com,
	aseketeli@baylibre.com
Subject: [PATCH v3 0/6] Add TPS6594 PMIC support on several boards
Date: Mon, 17 Apr 2023 17:48:26 +0200	[thread overview]
Message-ID: <20230417154832.216774-1-eblanc@baylibre.com> (raw)

TPS6594 is a Power Management IC which provides regulators and others
features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and
PFSM (Pre-configurable Finite State Machine). The SoC and the PMIC can
communicate through the I2C or SPI interfaces.
TPS6594 is the super-set device while TPS6593 and LP8764 are derivatives.

This serie adds device tree nodes for TI TPS6594 PMICs found in the
following boards:
- J721EXSOMXEVM:
  Link: https://www.ti.com/tool/J721EXSOMXEVM
- J721S2XSOMXEVM:
  Link: https://www.ti.com/tool/J721S2XSOMXEVM
- J7200XSOMXEVM:
  Link: https://www.ti.com/tool/J7200XSOMXEVM
- AM62A-SKEVM:
  Link: https://www.ti.com/tool/SK-AM62A-LP
- J784S4XEVM
  Link: https://www.ti.com/tool/J784S4XEVM

Changes since v1:
https://lore.kernel.org/lkml/20230329142948.833800-1-eblanc@baylibre.com/
- Harmonize regulators names across the different boards
- Adjust AVS voltage range
- Remove some outdated comments
- Add PMIC to J784S4 board
- Compatible string modified to match dt-bindings
- Add gpio-controller and gpio-cells properties

Changes since v2:
https://lore.kernel.org/lkml/20230414112843.1358067-1-eblanc@baylibre.com/
- Change node name as per Krzysztof review
- Add a fix for the interrupt range of wakeup gpio used by TPS6594 pmic
  on J784S4.
  The interruptions of the PMIC were not working before that
- Remove dependencies on other patch series as that was a mistake, see
  https://lore.kernel.org/lkml/CRYY2V3HJ0CP.96JQ18PLZB3C@burritosblues/

Apelete Seketeli (1):
  arm64: dts: ti: k3-j784s4-evm: Fix wakeup gpio pinmux interrupt range

Esteban Blanc (2):
  arm64: dts: ti: k3-j7200-som-p0: Add TP6594 family PMICs
  arm64: dts: ti: k3-j721s2-som-p0: Add TP6594 family PMICs

Jerome Neanne (2):
  arm64: dts: ti: k3-j721e-som-p0: Add TP6594 family PMICs
  arm64: dts: ti: k3-j784s4-evm: Add support for TPS6594 PMIC

Julien Panis (1):
  arm64: dts: ti: k3-am62a7-sk: Add support for TPS6593 PMIC

 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts       |  95 ++++++++
 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi   | 175 ++++++++++++++
 arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi   | 171 ++++++++++++++
 arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi  | 213 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts      | 116 ++++++++++
 .../boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi     |   2 +-
 6 files changed, 771 insertions(+), 1 deletion(-)

-- 
2.39.2


             reply	other threads:[~2023-04-17 15:49 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-17 15:48 Esteban Blanc [this message]
2023-04-17 15:48 ` [PATCH v3 1/6] arm64: dts: ti: k3-j7200-som-p0: Add TP6594 family PMICs Esteban Blanc
2023-04-17 15:48 ` [PATCH v3 2/6] arm64: dts: ti: k3-j721s2-som-p0: " Esteban Blanc
2023-04-17 15:48 ` [PATCH v3 3/6] arm64: dts: ti: k3-j721e-som-p0: " Esteban Blanc
2023-04-17 15:48 ` [PATCH v3 4/6] arm64: dts: ti: k3-j784s4-evm: Fix wakeup gpio pinmux interrupt range Esteban Blanc
2023-04-17 15:48 ` [PATCH v3 5/6] arm64: dts: ti: k3-j784s4-evm: Add support for TPS6594 PMIC Esteban Blanc
2023-04-17 15:48 ` [PATCH v3 6/6] arm64: dts: ti: k3-am62a7-sk: Add support for TPS6593 PMIC Esteban Blanc

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230417154832.216774-1-eblanc@baylibre.com \
    --to=eblanc@baylibre.com \
    --cc=aseketeli@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jneanne@baylibre.com \
    --cc=jpanis@baylibre.com \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=sterzik@ti.com \
    --cc=u-kumar1@ti.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®