From: Udit Kumar <u-kumar1@ti.com>
To: <linux-arm-kernel@lists.infradead.org>, <afd@ti.com>, <bb@ti.com>,
<vaishnav.a@ti.com>, <j-choudhary@ti.com>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>
Cc: Udit Kumar <u-kumar1@ti.com>
Subject: [PATCH v3 2/2] arm64: dts: ti: k3-j7200-som: Enable I2C
Date: Wed, 19 Apr 2023 09:30:07 +0530 [thread overview]
Message-ID: <20230419040007.3022780-3-u-kumar1@ti.com> (raw)
In-Reply-To: <20230419040007.3022780-1-u-kumar1@ti.com>
This patch enables wkup_i2c0 node in board dts file
along with pin mux and speed.
Also enables underneath eeprom CAV24C256WE.
J7200 Datasheet (Table 6-106, Section 6.4 Pin Multiplexing) :
https://www.ti.com/lit/ds/symlink/dra821u.pdf
J7200 User Guide (Section 4.3, Table 4-2) :
https://www.ti.com/lit/ug/spruiw7a/spruiw7a.pdf
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---
arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
index fa44ed4c17d5..269424154771 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
@@ -118,6 +118,15 @@ J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* MCU_OSPI0_DQS */
};
};
+&wkup_pmx2 {
+ wkup_i2c0_pins_default: wkup-i2c0-pins-default {
+ pinctrl-single,pins = <
+ J721E_WKUP_IOPAD(0x98, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */
+ J721E_WKUP_IOPAD(0x9c, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */
+ >;
+ };
+};
+
&main_pmx0 {
main_i2c0_pins_default: main-i2c0-pins-default {
pinctrl-single,pins = <
@@ -214,6 +223,18 @@ exp_som: gpio@21 {
};
};
+&wkup_i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wkup_i2c0_pins_default>;
+ clock-frequency = <400000>;
+
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+};
+
&ospi0 {
pinctrl-names = "default";
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
--
2.34.1
next prev parent reply other threads:[~2023-04-19 4:00 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-19 4:00 [PATCH v3 0/2] arm64: dts: ti: k3-j7200-common-proc-board fixes Udit Kumar
2023-04-19 4:00 ` [PATCH v3 1/2] arm64: dts: ti: k3-j7200: Fix physical address of pin Udit Kumar
2023-04-19 4:00 ` Udit Kumar [this message]
2023-06-15 13:31 ` [PATCH v3 0/2] arm64: dts: ti: k3-j7200-common-proc-board fixes Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230419040007.3022780-3-u-kumar1@ti.com \
--to=u-kumar1@ti.com \
--cc=afd@ti.com \
--cc=bb@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=j-choudhary@ti.com \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vaishnav.a@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®