[PATCH 3/7] arm64: dts: imx8mn-bsh-smm-s2/pro: add display setup

[Dario Binacchi <dario.binacchi@amarulasolutions.com>]

From: Michael Trimarchi <michael@amarulasolutions.com>

Add the display and nodes required for its operation.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---

 .../freescale/imx8mn-bsh-smm-s2-common.dtsi   |   1 +
 .../freescale/imx8mn-bsh-smm-s2-display.dtsi  | 111 ++++++++++++++++++
 2 files changed, 112 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
index c11895d9d582..5f9c0df0ec7d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "imx8mn.dtsi"
+#include "imx8mn-bsh-smm-s2-display.dtsi"
 
 / {
 	chosen {
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
new file mode 100644
index 000000000000..bac987d76f1e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 BSH
+ */
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 700000 0>;	/* 700000 ns = 1337Hz */
+		brightness-levels = <0 100>;
+		num-interpolated-steps = <100>;
+		default-brightness-level = <50>;
+		status = "okay";
+	};
+
+	reg_3v3_dvdd: regulator-3v3-O3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dvdd>;
+		regulator-name = "3v3-dvdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_v3v3_avdd: regulator-3v3-O2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_avdd>;
+		regulator-name = "3v3-avdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pwm1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_bl>;
+};
+
+&lcdif {
+	status = "okay";
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "sharp,ls068b3sx02", "synaptics,r63353";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel>;
+		reg = <0>;
+
+		backlight = <&backlight>;
+		dvdd-supply = <&reg_3v3_dvdd>;
+		avdd-supply = <&reg_v3v3_avdd>;
+		reset-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+			};
+		};
+
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&iomuxc {
+
+	/* This is for both PWM and voltage regulators for display */
+	pinctrl_bl: pwm1grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT	0x16
+		>;
+	};
+
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29	0x16	/* panel reset */
+		>;
+	};
+
+	pinctrl_dvdd: dvddgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7	0x16	/* VDD 3V3_VO3 */
+		>;
+	};
+
+	pinctrl_avdd: avddgrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x16	/* VDD 3V3_VO2 */
+		>;
+	};
+};
-- 
2.32.0