mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Mario Limonciello <mario.limonciello@amd.com>
To: Andreas Noever <andreas.noever@gmail.com>,
	Michael Jamet <michael.jamet@intel.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	Yehezkel Bernat <YehezkelShB@gmail.com>,
	Mario Limonciello <mario.limonciello@amd.com>
Cc: S Sanath <Sanath.S@amd.com>, <richard.gong@amd.com>,
	<Sanju.Mehta@amd.com>, Takashi Iwai <tiwai@suse.de>,
	<linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v2 1/2] thunderbolt: Clear registers properly when auto clear isn't in use
Date: Mon, 24 Apr 2023 14:55:54 -0500	[thread overview]
Message-ID: <20230424195556.2233-1-mario.limonciello@amd.com> (raw)

When `QUIRK_AUTO_CLEAR_INT` isn't set, interrupt masking should be
cleared by writing to Interrupt Mask Clear (IMR) and interrupt
status should be cleared properly at shutdown/init.

This fixes an error where interrupts are left enabled during resume
from hibernation with `CONFIG_USB4=y`.

Fixes: 468c49f44759 ("thunderbolt: Disable interrupt auto clear for rings")
Reported-by: Takashi Iwai <tiwai@suse.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217343
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
v1->v2:
 * Whitespace changes
 * Add new static functions for nhi_mask_interrupt() and
   nhi_clear_interrupt()

I tried to base this off thunderbolt.git/next (tag: thunderbolt-for-v6.4-rc1)
but the following 3 commits are missing from that branch but are in 6.3-rc7:

58cdfe6f58b3 thunderbolt: Rename shadowed variables bit to interrupt_bit and auto_clear_bit
468c49f44759 thunderbolt: Disable interrupt auto clear for rings
1716efdb0793 thunderbolt: Use const qualifier for `ring_interrupt_index`

I cherry picked them first as this patch builds on them. It's expected that
this patch should apply on top of 6.4-rc1 properly.
---
 drivers/thunderbolt/nhi.c      | 29 ++++++++++++++++++++++++-----
 drivers/thunderbolt/nhi_regs.h |  2 ++
 2 files changed, 26 insertions(+), 5 deletions(-)

diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c
index d76e923fbc6a..c0aee5dc5237 100644
--- a/drivers/thunderbolt/nhi.c
+++ b/drivers/thunderbolt/nhi.c
@@ -54,6 +54,21 @@ static int ring_interrupt_index(const struct tb_ring *ring)
 	return bit;
 }
 
+static void nhi_mask_interrupt(struct tb_nhi *nhi, int mask, int ring)
+{
+	if (nhi->quirks & QUIRK_AUTO_CLEAR_INT)
+		return;
+	iowrite32(mask, nhi->iobase + REG_RING_INTERRUPT_MASK_CLEAR_BASE + ring);
+}
+
+static void nhi_clear_interrupt(struct tb_nhi *nhi, int ring)
+{
+	if (nhi->quirks & QUIRK_AUTO_CLEAR_INT)
+		ioread32(nhi->iobase + REG_RING_NOTIFY_BASE + ring);
+	else
+		iowrite32(~0, nhi->iobase + REG_RING_INT_CLEAR + ring);
+}
+
 /*
  * ring_interrupt_active() - activate/deactivate interrupts for a single ring
  *
@@ -61,8 +76,8 @@ static int ring_interrupt_index(const struct tb_ring *ring)
  */
 static void ring_interrupt_active(struct tb_ring *ring, bool active)
 {
-	int reg = REG_RING_INTERRUPT_BASE +
-		  ring_interrupt_index(ring) / 32 * 4;
+	int index = ring_interrupt_index(ring) / 32 * 4;
+	int reg = REG_RING_INTERRUPT_BASE + index;
 	int interrupt_bit = ring_interrupt_index(ring) & 31;
 	int mask = 1 << interrupt_bit;
 	u32 old, new;
@@ -123,7 +138,11 @@ static void ring_interrupt_active(struct tb_ring *ring, bool active)
 					 "interrupt for %s %d is already %s\n",
 					 RING_TYPE(ring), ring->hop,
 					 active ? "enabled" : "disabled");
-	iowrite32(new, ring->nhi->iobase + reg);
+
+	if (active)
+		iowrite32(new, ring->nhi->iobase + reg);
+	else
+		nhi_mask_interrupt(ring->nhi, mask, index);
 }
 
 /*
@@ -136,11 +155,11 @@ static void nhi_disable_interrupts(struct tb_nhi *nhi)
 	int i = 0;
 	/* disable interrupts */
 	for (i = 0; i < RING_INTERRUPT_REG_COUNT(nhi); i++)
-		iowrite32(0, nhi->iobase + REG_RING_INTERRUPT_BASE + 4 * i);
+		nhi_mask_interrupt(nhi, ~0, 4 * i);
 
 	/* clear interrupt status bits */
 	for (i = 0; i < RING_NOTIFY_REG_COUNT(nhi); i++)
-		ioread32(nhi->iobase + REG_RING_NOTIFY_BASE + 4 * i);
+		nhi_clear_interrupt(nhi, 4 * i);
 }
 
 /* ring helper methods */
diff --git a/drivers/thunderbolt/nhi_regs.h b/drivers/thunderbolt/nhi_regs.h
index faef165a919c..6ba295815477 100644
--- a/drivers/thunderbolt/nhi_regs.h
+++ b/drivers/thunderbolt/nhi_regs.h
@@ -93,6 +93,8 @@ struct ring_desc {
 #define REG_RING_INTERRUPT_BASE	0x38200
 #define RING_INTERRUPT_REG_COUNT(nhi) ((31 + 2 * nhi->hop_count) / 32)
 
+#define REG_RING_INTERRUPT_MASK_CLEAR_BASE	0x38208
+
 #define REG_INT_THROTTLING_RATE	0x38c00
 
 /* Interrupt Vector Allocation */
-- 
2.34.1


             reply	other threads:[~2023-04-24 19:57 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-24 19:55 Mario Limonciello [this message]
2023-04-24 19:55 ` [PATCH v2 2/2] thunderbolt: Move Intel quirks into quirks.c Mario Limonciello
2023-04-26 11:00   ` Mika Westerberg
2023-04-26 19:49     ` Limonciello, Mario
2023-05-08 14:09 ` [PATCH v2 1/2] thunderbolt: Clear registers properly when auto clear isn't in use Limonciello, Mario
2023-05-09  6:41 ` Mika Westerberg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230424195556.2233-1-mario.limonciello@amd.com \
    --to=mario.limonciello@amd.com \
    --cc=Sanath.S@amd.com \
    --cc=Sanju.Mehta@amd.com \
    --cc=YehezkelShB@gmail.com \
    --cc=andreas.noever@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=michael.jamet@intel.com \
    --cc=mika.westerberg@linux.intel.com \
    --cc=richard.gong@amd.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®