mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Mario Limonciello <mario.limonciello@amd.com>
To: Mathias Nyman <mathias.nyman@intel.com>,
	Mario Limonciello <mario.limonciello@amd.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Natikar Basavaraj <Basavaraj.Natikar@amd.com>,
	Donghun Yoon <donghun.yoon@lge.com>, <linux-usb@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v2] xhci-pci: Only run d3cold avoidance quirk for s2idle
Date: Mon, 24 Apr 2023 16:48:59 -0500	[thread overview]
Message-ID: <20230424214859.3109-1-mario.limonciello@amd.com> (raw)

Donghun reports that a notebook that has an AMD Ryzen 5700U but supports
S3 has problems with USB after resuming from suspend. The issue was
bisected down to commit d1658268e439 ("usb: pci-quirks: disable D3cold on
xhci suspend for s2idle on AMD Renoir").

As this issue only happens on S3, narrow the broken D3cold quirk to only
run in s2idle.

Fixes: d1658268e439 ("usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir")
Reported-and-tested-by: Donghun Yoon <donghun.yoon@lge.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
v1->v2:
 * Guard against CONFIG_SUSPEND not being set
---
 drivers/usb/host/xhci-pci.c | 12 ++++++++++--
 drivers/usb/host/xhci.h     |  2 +-
 2 files changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 6db07ca419c3..1fb727f5c496 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/acpi.h>
 #include <linux/reset.h>
+#include <linux/suspend.h>
 
 #include "xhci.h"
 #include "xhci-trace.h"
@@ -194,7 +195,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 
 	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
 		pdev->device == PCI_DEVICE_ID_AMD_RENOIR_XHCI)
-		xhci->quirks |= XHCI_BROKEN_D3COLD;
+		xhci->quirks |= XHCI_BROKEN_D3COLD_S2I;
 
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
 		xhci->quirks |= XHCI_LPM_SUPPORT;
@@ -609,9 +610,16 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 	 * Systems with the TI redriver that loses port status change events
 	 * need to have the registers polled during D3, so avoid D3cold.
 	 */
-	if (xhci->quirks & (XHCI_COMP_MODE_QUIRK | XHCI_BROKEN_D3COLD))
+	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
 		pci_d3cold_disable(pdev);
 
+#ifdef CONFIG_SUSPEND
+	/* d3cold is broken, but only when s2idle is used */
+	if (pm_suspend_target_state == PM_SUSPEND_TO_IDLE &&
+	    xhci->quirks & (XHCI_BROKEN_D3COLD_S2I))
+		pci_d3cold_disable(pdev);
+#endif
+
 	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
 		xhci_pme_quirk(hcd);
 
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 786002bb35db..3818359603cc 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1901,7 +1901,7 @@ struct xhci_hcd {
 #define XHCI_DISABLE_SPARSE	BIT_ULL(38)
 #define XHCI_SG_TRB_CACHE_SIZE_QUIRK	BIT_ULL(39)
 #define XHCI_NO_SOFT_RETRY	BIT_ULL(40)
-#define XHCI_BROKEN_D3COLD	BIT_ULL(41)
+#define XHCI_BROKEN_D3COLD_S2I	BIT_ULL(41)
 #define XHCI_EP_CTX_BROKEN_DCS	BIT_ULL(42)
 #define XHCI_SUSPEND_RESUME_CLKS	BIT_ULL(43)
 #define XHCI_RESET_TO_DEFAULT	BIT_ULL(44)
-- 
2.34.1


             reply	other threads:[~2023-04-24 21:49 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-24 21:48 Mario Limonciello [this message]
2023-05-03 13:14 ` Mathias Nyman
2023-05-03 13:59   ` Limonciello, Mario
2023-05-04  7:51     ` Mathias Nyman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230424214859.3109-1-mario.limonciello@amd.com \
    --to=mario.limonciello@amd.com \
    --cc=Basavaraj.Natikar@amd.com \
    --cc=donghun.yoon@lge.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®