mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Dominic Rath <rath@ibv-augsburg.de>
To: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
	tjoseph@cadence.com
Cc: bhelgaas@google.com, lpieralisi@kernel.org, nm@ti.com,
	vigneshr@ti.com, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
	christian.gmeiner@gmail.com, bahle@ibv-augsburg.de,
	Dominic Rath <rath@ibv-augsburg.de>
Subject: [PATCH v2 2/3] PCI: cadence: Use DT bindings to set PHY latencies
Date: Thu, 27 Apr 2023 07:50:31 +0200	[thread overview]
Message-ID: <20230427055032.85015-3-rath@ibv-augsburg.de> (raw)
In-Reply-To: <20230427055032.85015-1-rath@ibv-augsburg.de>

From: Alexander Bahle <bahle@ibv-augsburg.de>

Use optional "tx-phy-latency-ps" and "rx-phy-latency-ps"
DeviceTree bindings to set the CDNS_PCIE_LM_PTM_LAT_PARAM(_IDX)
register(s) during PCIe host and endpoint setup.

The properties are lists of uint32 PHY latencies in picoseconds for
every supported speed starting at PCIe Gen1, e.g.:

  tx-phy-latency-ps = <100000 200000>; /* Gen1: 100ns, Gen2: 200ns */
  rx-phy-latency-ps = <150000 250000>; /* Gen1: 150ns, Gen2: 250ns */

There should be a value for every supported speed, otherwise a info
message is emitted to let users know that the PTM timestamps from this
PCIe device may not be precise enough for some applications.

Signed-off-by: Alexander Bahle <bahle@ibv-augsburg.de>
Signed-off-by: Dominic Rath <rath@ibv-augsburg.de>
---
 .../pci/controller/cadence/pcie-cadence-ep.c  |  2 +
 .../controller/cadence/pcie-cadence-host.c    |  1 +
 drivers/pci/controller/cadence/pcie-cadence.c | 92 +++++++++++++++++++
 drivers/pci/controller/cadence/pcie-cadence.h | 23 +++++
 4 files changed, 118 insertions(+)

diff --git a/drivers/pci/controller/cadence/pcie-cadence-ep.c b/drivers/pci/controller/cadence/pcie-cadence-ep.c
index b8b655d4047e..6e39126922d1 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-ep.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-ep.c
@@ -664,6 +664,8 @@ int cdns_pcie_ep_setup(struct cdns_pcie_ep *ep)
 	}
 	pcie->mem_res = res;
 
+	cdns_pcie_init_ptm_phy_latency(dev, pcie);
+
 	ep->max_regions = CDNS_PCIE_MAX_OB;
 	of_property_read_u32(np, "cdns,max-outbound-regions", &ep->max_regions);
 
diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
index 940c7dd701d6..8933002f828e 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
@@ -510,6 +510,7 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 		cdns_pcie_detect_quiet_min_delay_set(&rc->pcie);
 
 	cdns_pcie_host_enable_ptm_response(pcie);
+	cdns_pcie_init_ptm_phy_latency(dev, pcie);
 
 	ret = cdns_pcie_start_link(pcie);
 	if (ret) {
diff --git a/drivers/pci/controller/cadence/pcie-cadence.c b/drivers/pci/controller/cadence/pcie-cadence.c
index 13c4032ca379..1a282ed9b888 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.c
+++ b/drivers/pci/controller/cadence/pcie-cadence.c
@@ -5,8 +5,100 @@
 
 #include <linux/kernel.h>
 
+#include "../../pci.h"
 #include "pcie-cadence.h"
 
+void cdns_pcie_set_ptm_phy_latency_param(struct cdns_pcie *pcie, bool rx,
+					 u32 speed_index, u32 latency)
+{
+	u32 val;
+
+	/* Set the speed index */
+	val = cdns_pcie_readl(pcie, CDNS_PCIE_LM_PTM_LAT_PARAM_IDX);
+	val = ((val & ~CDNS_PCIE_LM_PTM_LAT_PARAM_IDX_PTMLATIN_MASK) |
+		CDNS_PCIE_LM_PTM_LAT_PARAM_IDX_PTMLATIN(speed_index));
+	cdns_pcie_writel(pcie, CDNS_PCIE_LM_PTM_LAT_PARAM_IDX, val);
+
+	val = cdns_pcie_readl(pcie, CDNS_PCIE_LM_PTM_LAT_PARAM);
+	if (rx)	{
+		/* Set the RX direction latency */
+		val = ((val & ~CDNS_PCIE_LM_PTM_LAT_PARAM_PTMRXLAT_MASK) |
+			CDNS_PCIE_LM_PTM_LAT_PARAM_PTMRXLAT(latency));
+	} else {
+		/* Set TX direction latency */
+		val = ((val & ~CDNS_PCIE_LM_PTM_LAT_PARAM_PTMTXLAT_MASK) |
+			CDNS_PCIE_LM_PTM_LAT_PARAM_PTMTXLAT(latency));
+	}
+	cdns_pcie_writel(pcie, CDNS_PCIE_LM_PTM_LAT_PARAM, val);
+}
+
+static int cdns_pcie_set_ptm_phy_latency(struct device *dev, struct cdns_pcie *pcie,
+					 bool rx, const char *key)
+{
+	struct device_node *np;
+	int max_link_speed;
+	int param_count;
+	u32 latency;
+	int ret;
+	int i;
+
+	/* Do nothing if there is no phy */
+	if (pcie->phy_count < 1)
+		return 0;
+
+	np = dev->of_node;
+	max_link_speed = of_pci_get_max_link_speed(np);
+	if (max_link_speed < 1)
+		return -EINVAL;
+
+	/* Only check and use params of the first phy */
+	np = pcie->phy[0]->dev.of_node;
+	param_count = of_property_count_u32_elems(np, key);
+	if (param_count < 0 || param_count < max_link_speed) {
+		dev_info(dev,
+			 "PTM: no %s set for one or more speeds: %d\n",
+			 key, param_count);
+	}
+
+	/* Don't set param for unsupported speed */
+	if (param_count > max_link_speed)
+		param_count = max_link_speed;
+
+	for (i = 0; i < param_count; i++) {
+		ret = of_property_read_u32_index(np, key, i, &latency);
+		if (ret != 0) {
+			dev_err(dev, "failed to read PTM latency for speed %d from %s\n",
+				i, key);
+			return ret;
+		}
+
+		/* convert ps to ns */
+		latency /= 1000;
+
+		cdns_pcie_set_ptm_phy_latency_param(pcie, rx,
+						    i, latency);
+
+		dev_dbg(dev, "PTM: %s phy latency Gen.%d: %uns\n",
+			rx ? "rx" : "tx", i+1, latency);
+	}
+
+	return 0;
+}
+
+int cdns_pcie_init_ptm_phy_latency(struct device *dev, struct cdns_pcie *pcie)
+{
+	int ret;
+
+	ret = cdns_pcie_set_ptm_phy_latency(dev, pcie, false,
+					    "tx-phy-latency-ps");
+	if (ret)
+		return ret;
+
+	ret = cdns_pcie_set_ptm_phy_latency(dev, pcie, true,
+					    "rx-phy-latency-ps");
+	return ret;
+}
+
 void cdns_pcie_detect_quiet_min_delay_set(struct cdns_pcie *pcie)
 {
 	u32 delay = 0x3;
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index 190786e47df9..483b957a8212 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -120,6 +120,26 @@
 #define CDNS_PCIE_LM_PTM_CTRL 	(CDNS_PCIE_LM_BASE + 0x0da8)
 #define CDNS_PCIE_LM_TPM_CTRL_PTMRSEN 	BIT(17)
 
+/* PTM Latency Parameters Index Register */
+#define CDNS_PCIE_LM_PTM_LAT_PARAM_IDX \
+				(CDNS_PCIE_LM_BASE + 0x0db0)
+#define  CDNS_PCIE_LM_PTM_LAT_PARAM_IDX_PTMLATIN_MASK \
+					GENMASK(3, 0)
+#define  CDNS_PCIE_LM_PTM_LAT_PARAM_IDX_PTMLATIN(a) \
+	(((a) << 0) & CDNS_PCIE_LM_PTM_LAT_PARAM_IDX_PTMLATIN_MASK)
+
+/* PTM Latency Parameters Register */
+#define CDNS_PCIE_LM_PTM_LAT_PARAM \
+				(CDNS_PCIE_LM_BASE + 0x0db4)
+#define  CDNS_PCIE_LM_PTM_LAT_PARAM_PTMTXLAT_MASK \
+					GENMASK(9, 0)
+#define  CDNS_PCIE_LM_PTM_LAT_PARAM_PTMTXLAT(a) \
+	(((a) << 0) & CDNS_PCIE_LM_PTM_LAT_PARAM_PTMTXLAT_MASK)
+#define  CDNS_PCIE_LM_PTM_LAT_PARAM_PTMRXLAT_MASK \
+					GENMASK(19, 10)
+#define  CDNS_PCIE_LM_PTM_LAT_PARAM_PTMRXLAT(b) \
+	(((b) << 10) & CDNS_PCIE_LM_PTM_LAT_PARAM_PTMRXLAT_MASK)
+
 /*
  * Endpoint Function Registers (PCI configuration space for endpoint functions)
  */
@@ -541,6 +561,9 @@ static inline int cdns_pcie_ep_setup(struct cdns_pcie_ep *ep)
 #endif
 
 void cdns_pcie_detect_quiet_min_delay_set(struct cdns_pcie *pcie);
+void cdns_pcie_set_ptm_phy_latency_param(struct cdns_pcie *pcie, bool rx,
+					 u32 speed_index, u32 latency);
+int cdns_pcie_init_ptm_phy_latency(struct device *dev, struct cdns_pcie *pcie);
 
 void cdns_pcie_set_outbound_region(struct cdns_pcie *pcie, u8 busnr, u8 fn,
 				   u32 r, bool is_io,
-- 
2.36.0


  parent reply	other threads:[~2023-04-27  6:03 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-27  5:50 [PATCH v2 0/3] Cadence PCIe PHY latency for PTM Dominic Rath
2023-04-27  5:50 ` [PATCH v2 1/3] dt-bindings: phy: cadence-torrent: Add latency properties Dominic Rath
2023-04-27 18:30   ` Bjorn Helgaas
2023-05-09 15:31     ` Christian Gmeiner
2023-05-09 21:57       ` Bjorn Helgaas
2023-05-10  7:08         ` Krzysztof Kozlowski
2023-05-10 21:12           ` Bjorn Helgaas
2023-05-30  8:19   ` Christian Gmeiner
2023-04-27  5:50 ` Dominic Rath [this message]
2023-05-04 11:33   ` [PATCH v2 2/3] PCI: cadence: Use DT bindings to set PHY latencies Verma, Achal
2023-05-30  8:20     ` Christian Gmeiner
2023-04-27  5:50 ` [PATCH v2 3/3] arm64: dts: ti: k3-am64: Add PCIe PHY latency DT binding Dominic Rath
2023-05-09 15:27   ` Christian Gmeiner
2023-05-30  8:21 ` [PATCH v2 0/3] Cadence PCIe PHY latency for PTM Christian Gmeiner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230427055032.85015-3-rath@ibv-augsburg.de \
    --to=rath@ibv-augsburg.de \
    --cc=bahle@ibv-augsburg.de \
    --cc=bhelgaas@google.com \
    --cc=christian.gmeiner@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=tjoseph@cadence.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®