From: "Mårten Lindahl" <marten.lindahl@axis.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
kernel@axis.com, "Mårten Lindahl" <marten.lindahl@axis.com>
Subject: [PATCH v3 0/2] regulator: Add support for TPS6287x
Date: Mon, 8 May 2023 15:14:06 +0200 [thread overview]
Message-ID: <20230502-tps6287x-driver-v3-0-e25140a023f5@axis.com> (raw)
This series adds basic support for TI's TPS62870/TPS62871/TPS62872/
TPS62873 high-frequency single-channel step-down converters with an
I2C interface.
The devices can operate in power save mode for maximum efficiency, or
forced-PWM mode for best transient performance and lowest output
voltage ripple. All chip variants have four output voltage ranges and
the driver changes active range depending on the requested voltage
setting.
There are differences in the electrical characteristics and packaging
between the variants, but the register interfaces are identical.
Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
---
Changes in v3:
- dt-bindings: Changed subject prefix "regulator:" => "regulator: dt-bindings:".
- dt-bindings: Dropped 'regulators' and 'vout' nodes.
- dt-bindings: Added description for regulator-initial-mode.
- Call of_get_regulator_init_data to read the regulation constraints from driver probe.
- Drop local get/set voltage functions and use helper functions get/set/list_pickable_regmap
with linear_ranges/linear_range_selectors mappings instead.
- Link to v2: https://lore.kernel.org/r/20230502-tps6287x-driver-v2-0-fb5419d46c49@axis.com
Changes in v2:
- No changes. v2 was v1
---
Mårten Lindahl (2):
regulator: dt-bindings: Add bindings for TPS6287x
regulator: Add support for TI TPS6287x regulators
.../devicetree/bindings/regulator/ti,tps62870.yaml | 52 ++++++
drivers/regulator/Kconfig | 11 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/tps6287x-regulator.c | 188 +++++++++++++++++++++
4 files changed, 252 insertions(+)
---
base-commit: 457391b0380335d5e9a5babdec90ac53928b23b4
change-id: 20230502-tps6287x-driver-af1474b3111e
Best regards,
--
Mårten Lindahl <marten.lindahl@axis.com>
next reply other threads:[~2023-05-08 13:14 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-08 13:14 Mårten Lindahl [this message]
2023-05-08 13:14 ` [PATCH v3 1/2] regulator: dt-bindings: Add bindings " Mårten Lindahl
2023-05-08 13:38 ` Krzysztof Kozlowski
2023-05-08 13:14 ` [PATCH v3 2/2] regulator: Add support for TI TPS6287x regulators Mårten Lindahl
2023-05-09 6:39 ` [PATCH v3 0/2] regulator: Add support for TPS6287x Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230502-tps6287x-driver-v3-0-e25140a023f5@axis.com \
--to=marten.lindahl@axis.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@axis.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®