From: Changhuang Liang <changhuang.liang@starfivetech.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Emil Renner Berthing <kernel@esmil.dk>,
Conor Dooley <conor@kernel.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>
Cc: Walker Chen <walker.chen@starfivetech.com>,
Changhuang Liang <changhuang.liang@starfivetech.com>,
Hal Feng <hal.feng@starfivetech.com>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-riscv@lists.infradead.org>
Subject: [PATCH v3 0/5] Add JH7110 AON PMU support
Date: Tue, 9 May 2023 18:53:06 -0700 [thread overview]
Message-ID: <20230510015311.27505-1-changhuang.liang@starfivetech.com> (raw)
This patchset adds aon power domain driver for the StarFive JH7110 SoC.
It is used to turn on/off dphy rx/tx power switch. It also can use syscon
operation. The series has been tested on the VisionFive 2 board.
This patchset should be applied after the patchset [1]:
[1] https://lore.kernel.org/all/20230401111934.130844-1-hal.feng@starfivetech.com/
changes since v2:
- Updated commit message.
- Changed "starfive,jh7110-aon-pmu" to "starfive,jh7110-aon-syscon".
- Dropped patch 3: Modify ioremap to regmap.
- Changed "pmu_parse_dt" to "pmu_parse_irq".
- Dropped "pmu_parse_dt" function in aon pmu.
- Changed copyright to "2022-2023" in "starfive,jh7110-pmu.h".
- Replaced regread/regwrite operation with io_read/io_write operation.
v2: https://lore.kernel.org/all/20230419035646.43702-1-changhuang.liang@starfivetech.com/
changes since v1:
- Updated commit message.
- Changed "starfive,jh7110-pmu-dphy" to "starfive,jh7110-aon-pmu".
- Put if condition under allOf in .yaml file.
- Updated spelling error.
- Dropped patch 4: Add pmu type operation.
- Changed "jh71xx_pmu_general_set_state" to "jh7110_pmu_set_state" and moved it in call back.
- Changed "jh7110_pmu_general_parse_dt" to "jh7110_pmu_parse_dt" and moved it in call back.
- Used pmu_status save the pmu status offset.
- Changed "JH71XX_PMU_DPHY_SWITCH" to "JH71XX_AON_PMU_SWITCH"
- Changed copyright to "2022-2023"
v1: https://lore.kernel.org/all/20230411064743.273388-1-changhuang.liang@starfivetech.com/
Changhuang Liang (5):
dt-bindings: power: Add JH7110 AON PMU support
soc: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE
soc: starfive: Extract JH7110 pmu private operations
soc: starfive: Add JH7110 AON PMU support
riscv: dts: starfive: jh7110: Add AON PMU node
.../bindings/power/starfive,jh7110-pmu.yaml | 28 +++-
MAINTAINERS | 1 +
arch/riscv/boot/dts/starfive/jh7110.dtsi | 6 +
drivers/soc/starfive/Kconfig | 4 +-
drivers/soc/starfive/jh71xx_pmu.c | 138 ++++++++++++++----
.../dt-bindings/power/starfive,jh7110-pmu.h | 5 +-
6 files changed, 148 insertions(+), 34 deletions(-)
base-commit: 197b6b60ae7bc51dd0814953c562833143b292aa
--
2.25.1
next reply other threads:[~2023-05-10 1:53 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-10 1:53 Changhuang Liang [this message]
2023-05-10 1:53 ` [PATCH v3 1/5] dt-bindings: power: " Changhuang Liang
2023-05-10 7:06 ` Conor Dooley
2023-05-10 7:20 ` Changhuang Liang
2023-05-10 19:51 ` Conor Dooley
2023-05-11 2:06 ` Changhuang Liang
2023-05-10 1:53 ` [PATCH v3 2/5] soc: starfive: Replace SOC_STARFIVE with ARCH_STARFIVE Changhuang Liang
2023-05-10 1:53 ` [PATCH v3 3/5] soc: starfive: Extract JH7110 pmu private operations Changhuang Liang
2023-05-10 6:51 ` Walker Chen
2023-05-10 1:53 ` [PATCH v3 4/5] soc: starfive: Add JH7110 AON PMU support Changhuang Liang
2023-05-10 1:53 ` [PATCH v3 5/5] riscv: dts: starfive: jh7110: Add AON PMU node Changhuang Liang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230510015311.27505-1-changhuang.liang@starfivetech.com \
--to=changhuang.liang@starfivetech.com \
--cc=aou@eecs.berkeley.edu \
--cc=conor@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hal.feng@starfivetech.com \
--cc=kernel@esmil.dk \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
--cc=walker.chen@starfivetech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®