From: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
To: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
shawnguo@kernel.org, s.hauer@pengutronix.de
Cc: kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: [PATCH 3/5] arm64: dts: imx93: reorder device nodes
Date: Wed, 10 May 2023 16:31:51 +0800 [thread overview]
Message-ID: <20230510083153.3769140-4-peng.fan@oss.nxp.com> (raw)
In-Reply-To: <20230510083153.3769140-1-peng.fan@oss.nxp.com>
From: Peng Fan <peng.fan@nxp.com>
Reorder device nodes per address
- Move eqos node after fec node
- Move mediamix node after mlmix node
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm64/boot/dts/freescale/imx93.dtsi | 60 ++++++++++++------------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 8354d17a6a3f..5c5652ae4ee0 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -305,14 +305,6 @@ src: system-controller@44460000 {
#size-cells = <1>;
ranges;
- mediamix: power-domain@44462400 {
- compatible = "fsl,imx93-src-slice";
- reg = <0x44462400 0x400>, <0x44465800 0x400>;
- #power-domain-cells = <0>;
- clocks = <&clk IMX93_CLK_MEDIA_AXI>,
- <&clk IMX93_CLK_MEDIA_APB>;
- };
-
mlmix: power-domain@44461800 {
compatible = "fsl,imx93-src-slice";
reg = <0x44461800 0x400>, <0x44464800 0x400>;
@@ -320,6 +312,14 @@ mlmix: power-domain@44461800 {
clocks = <&clk IMX93_CLK_ML_APB>,
<&clk IMX93_CLK_ML>;
};
+
+ mediamix: power-domain@44462400 {
+ compatible = "fsl,imx93-src-slice";
+ reg = <0x44462400 0x400>, <0x44465800 0x400>;
+ #power-domain-cells = <0>;
+ clocks = <&clk IMX93_CLK_MEDIA_AXI>,
+ <&clk IMX93_CLK_MEDIA_APB>;
+ };
};
anatop: anatop@44480000 {
@@ -685,28 +685,6 @@ usdhc2: mmc@42860000 {
status = "disabled";
};
- eqos: ethernet@428a0000 {
- compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a";
- reg = <0x428a0000 0x10000>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq", "eth_wake_irq";
- clocks = <&clk IMX93_CLK_ENET_QOS_GATE>,
- <&clk IMX93_CLK_ENET_QOS_GATE>,
- <&clk IMX93_CLK_ENET_TIMER2>,
- <&clk IMX93_CLK_ENET>,
- <&clk IMX93_CLK_ENET_QOS_GATE>;
- clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
- assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>,
- <&clk IMX93_CLK_ENET>;
- assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
- <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
- assigned-clock-rates = <100000000>, <250000000>;
- intf_mode = <&wakeupmix_gpr 0x28>;
- snps,clk-csr = <0>;
- status = "disabled";
- };
-
fec: ethernet@42890000 {
compatible = "fsl,imx93-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
reg = <0x42890000 0x10000>;
@@ -733,6 +711,28 @@ fec: ethernet@42890000 {
status = "disabled";
};
+ eqos: ethernet@428a0000 {
+ compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a";
+ reg = <0x428a0000 0x10000>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_wake_irq";
+ clocks = <&clk IMX93_CLK_ENET_QOS_GATE>,
+ <&clk IMX93_CLK_ENET_QOS_GATE>,
+ <&clk IMX93_CLK_ENET_TIMER2>,
+ <&clk IMX93_CLK_ENET>,
+ <&clk IMX93_CLK_ENET_QOS_GATE>;
+ clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
+ assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>,
+ <&clk IMX93_CLK_ENET>;
+ assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+ <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+ assigned-clock-rates = <100000000>, <250000000>;
+ intf_mode = <&wakeupmix_gpr 0x28>;
+ snps,clk-csr = <0>;
+ status = "disabled";
+ };
+
usdhc3: mmc@428b0000 {
compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
reg = <0x428b0000 0x10000>;
--
2.37.1
next prev parent reply other threads:[~2023-05-10 8:27 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-10 8:31 [PATCH 0/5] arm64: dts: imx93: add nodes and minor update Peng Fan (OSS)
2023-05-10 8:31 ` [PATCH 1/5] arm64: dts: imx93: add watchdog node Peng Fan (OSS)
2023-05-10 8:31 ` [PATCH 2/5] arm64: dts: imx93: add ocotp node Peng Fan (OSS)
2023-05-10 8:31 ` Peng Fan (OSS) [this message]
2023-05-10 8:31 ` [PATCH 4/5] arm64: dts: imx93: add cpuidle node Peng Fan (OSS)
2023-05-10 8:31 ` [PATCH 5/5] arm64: dts: imx93-11x11-evk: enable wdog3 Peng Fan (OSS)
2023-05-15 3:23 ` [PATCH 0/5] arm64: dts: imx93: add nodes and minor update Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230510083153.3769140-4-peng.fan@oss.nxp.com \
--to=peng.fan@oss.nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®