[PATCH v4 3/6] serial: 8250: Add dl_read/write, bugs and mapsize into plat_serial8250_port

["Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>]

Add mapsize, bugs, and divisor latch read/write functions
(->dl_read/write()) into plat_serial8250_port to carry the setup
necessary for RT288x/Au1xxx devices over to uart port.

Document the added members with kerneldoc style but do not enable
kerneldoc yet as there are many fields which remain undocumented.

While at it, convert .bugs in struct uart_8250_port to u16 to match it
with the type used in struct plat_serial8250_port.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/tty/serial/8250/8250_core.c |  4 ++++
 include/linux/serial_8250.h         | 21 ++++++++++++++++++++-
 2 files changed, 24 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 13bf535eedcd..21b15b130d12 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -822,12 +822,16 @@ static int serial8250_probe(struct platform_device *dev)
 		uart.port.iotype	= p->iotype;
 		uart.port.flags		= p->flags;
 		uart.port.mapbase	= p->mapbase;
+		uart.port.mapsize	= p->mapsize;
 		uart.port.hub6		= p->hub6;
 		uart.port.has_sysrq	= p->has_sysrq;
 		uart.port.private_data	= p->private_data;
 		uart.port.type		= p->type;
+		uart.bugs		= p->bugs;
 		uart.port.serial_in	= p->serial_in;
 		uart.port.serial_out	= p->serial_out;
+		uart.dl_read		= p->dl_read;
+		uart.dl_write		= p->dl_write;
 		uart.port.handle_irq	= p->handle_irq;
 		uart.port.handle_break	= p->handle_break;
 		uart.port.set_termios	= p->set_termios;
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index d64e7bbe1f2f..42fc8f64f48e 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -11,13 +11,29 @@
 #include <linux/serial_reg.h>
 #include <linux/platform_device.h>
 
+struct uart_8250_port;
+
 /*
  * This is the platform device platform_data structure
+ *
+ * @mapsize:	Port size for ioremap()
+ * @bugs:	Port bugs
+ *
+ * @dl_read: ``u32 ()(struct uart_8250_port *up)``
+ *
+ *	UART divisor latch read.
+ *
+ * @dl_write: ``void ()(struct uart_8250_port *up, u32 value)``
+ *
+ *	Write @value into UART divisor latch.
+ *
+ *	Locking: Caller holds port's lock.
  */
 struct plat_serial8250_port {
 	unsigned long	iobase;		/* io base address */
 	void __iomem	*membase;	/* ioremap cookie or NULL */
 	resource_size_t	mapbase;	/* resource base */
+	resource_size_t	mapsize;
 	unsigned int	uartclk;	/* UART clock rate */
 	unsigned int	irq;		/* interrupt number */
 	unsigned long	irqflags;	/* request_irq flags */
@@ -28,8 +44,11 @@ struct plat_serial8250_port {
 	unsigned char	has_sysrq;	/* supports magic SysRq */
 	unsigned int	type;		/* If UPF_FIXED_TYPE */
 	upf_t		flags;		/* UPF_* flags */
+	u16		bugs;		/* port bugs */
 	unsigned int	(*serial_in)(struct uart_port *, int);
 	void		(*serial_out)(struct uart_port *, int, int);
+	u32		(*dl_read)(struct uart_8250_port *up);
+	void		(*dl_write)(struct uart_8250_port *up, u32 value);
 	void		(*set_termios)(struct uart_port *,
 			               struct ktermios *new,
 			               const struct ktermios *old);
@@ -106,7 +125,7 @@ struct uart_8250_port {
 	struct timer_list	timer;		/* "no irq" timer */
 	struct list_head	list;		/* ports on this IRQ */
 	u32			capabilities;	/* port capabilities */
-	unsigned short		bugs;		/* port bugs */
+	u16			bugs;		/* port bugs */
 	bool			fifo_bug;	/* min RX trigger if enabled */
 	unsigned int		tx_loadsz;	/* transmit fifo load size */
 	unsigned char		acr;
-- 
2.30.2