From: Kai-Heng Feng <kai.heng.feng@canonical.com>
To: bhelgaas@google.com
Cc: mika.westerberg@linux.intel.com, koba.ko@canonical.com,
sathyanarayanan.kuppuswamy@linux.intel.com,
Kai-Heng Feng <kai.heng.feng@canonical.com>,
Mahesh J Salgaonkar <mahesh@linux.ibm.com>,
"Oliver O'Halloran" <oohall@gmail.com>,
linuxppc-dev@lists.ozlabs.org, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v5 2/3] PCI/AER: Disable AER interrupt on suspend
Date: Thu, 11 May 2023 21:36:08 +0800 [thread overview]
Message-ID: <20230511133610.99759-2-kai.heng.feng@canonical.com> (raw)
In-Reply-To: <20230511133610.99759-1-kai.heng.feng@canonical.com>
PCIe service that shares IRQ with PME may cause spurious wakeup on
system suspend.
This is very similar to previous attempts to suspend AER and DPC [1],
but this time disabling AER IRQ is to prevent immediate PME wakeup when
AER shares the same IRQ line with PME.
It's okay to disable AER because PCIe Base Spec 5.0, section 5.2 "Link
State Power Management" states that TLP and DLLP transmission is
disabled for a Link in L2/L3 Ready (D3hot), L2 (D3cold with aux power)
and L3 (D3cold), hence we don't lose much here to disable AER IRQ during
system suspend.
[1] https://lore.kernel.org/linux-pci/20220408153159.106741-1-kai.heng.feng@canonical.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216295
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
v5:
- Wording.
v4:
v3:
- No change.
v2:
- Only disable AER IRQ.
- No more check on PME IRQ#.
- Use helper.
drivers/pci/pcie/aer.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 1420e1f27105..9c07fdbeb52d 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -1356,6 +1356,26 @@ static int aer_probe(struct pcie_device *dev)
return 0;
}
+static int aer_suspend(struct pcie_device *dev)
+{
+ struct aer_rpc *rpc = get_service_data(dev);
+ struct pci_dev *pdev = rpc->rpd;
+
+ aer_disable_irq(pdev);
+
+ return 0;
+}
+
+static int aer_resume(struct pcie_device *dev)
+{
+ struct aer_rpc *rpc = get_service_data(dev);
+ struct pci_dev *pdev = rpc->rpd;
+
+ aer_enable_irq(pdev);
+
+ return 0;
+}
+
/**
* aer_root_reset - reset Root Port hierarchy, RCEC, or RCiEP
* @dev: pointer to Root Port, RCEC, or RCiEP
@@ -1420,6 +1440,8 @@ static struct pcie_port_service_driver aerdriver = {
.service = PCIE_PORT_SERVICE_AER,
.probe = aer_probe,
+ .suspend = aer_suspend,
+ .resume = aer_resume,
.remove = aer_remove,
};
--
2.34.1
next prev parent reply other threads:[~2023-05-11 13:40 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-11 13:36 [PATCH v5 1/3] PCI/AER: Factor out interrupt toggling into helpers Kai-Heng Feng
2023-05-11 13:36 ` Kai-Heng Feng [this message]
2023-05-11 22:07 ` [PATCH v5 2/3] PCI/AER: Disable AER interrupt on suspend Sathyanarayanan Kuppuswamy
2023-05-11 23:35 ` Kai-Heng Feng
2023-05-11 13:36 ` [PATCH v5 3/3] PCI/DPC: Disable DPC interrupt during suspend Kai-Heng Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230511133610.99759-2-kai.heng.feng@canonical.com \
--to=kai.heng.feng@canonical.com \
--cc=bhelgaas@google.com \
--cc=koba.ko@canonical.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mahesh@linux.ibm.com \
--cc=mika.westerberg@linux.intel.com \
--cc=oohall@gmail.com \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®