From: Vaishnav Achath <vaishnav.a@ti.com>
To: <vigneshr@ti.com>, <nm@ti.com>, <kristo@kernel.org>,
<conor+dt@kernel.org>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>, <afd@ti.com>
Cc: <vaishnav.a@ti.com>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <u-kumar1@ti.com>
Subject: [PATCH v2 3/6] arm64: dts: ti: k3-j7200-som: Describe OSPI and Hyperflash partition info
Date: Sat, 13 May 2023 19:47:09 +0530 [thread overview]
Message-ID: <20230513141712.27346-4-vaishnav.a@ti.com> (raw)
In-Reply-To: <20230513141712.27346-1-vaishnav.a@ti.com>
Describe OSPI and Hyperflash partition information through device tree,
this helps to remove passing partition information through the mtdparts
commandline parameter which requires maintaining the partition information
in a string format. J7200 SoM has a S28 64 MiB OSPI flash with sector size
of 256 KiB thus the size of the smallest partition is chosen as 256 KiB,
the SoM also has a 64 MiB Hyperflash present on it, the partition names
and offsets are chosen according to the corresponding name and offsets
in bootloader.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
---
arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 72 +++++++++++++++++++++
1 file changed, 72 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
index 269424154771..2a743b895074 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
@@ -149,6 +149,37 @@
flash@0,0 {
compatible = "cypress,hyperflash", "cfi-flash";
reg = <0x00 0x00 0x4000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "hbmc.tiboot3";
+ reg = <0x0 0x100000>;
+ };
+
+ partition@100000 {
+ label = "hbmc.tispl";
+ reg = <0x100000 0x200000>;
+ };
+
+ partition@300000 {
+ label = "hbmc.u-boot";
+ reg = <0x300000 0x400000>;
+ };
+
+ partition@700000 {
+ label = "hbmc.env";
+ reg = <0x700000 0x40000>;
+ };
+
+ partition@800000 {
+ label = "hbmc.rootfs";
+ reg = <0x800000 0x3800000>;
+ };
+ };
};
};
@@ -250,5 +281,46 @@
cdns,tchsh-ns = <60>;
cdns,tslch-ns = <60>;
cdns,read-delay = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "ospi.tiboot3";
+ reg = <0x0 0x100000>;
+ };
+
+ partition@100000 {
+ label = "ospi.tispl";
+ reg = <0x100000 0x200000>;
+ };
+
+ partition@300000 {
+ label = "ospi.u-boot";
+ reg = <0x300000 0x400000>;
+ };
+
+ partition@700000 {
+ label = "ospi.env";
+ reg = <0x700000 0x40000>;
+ };
+
+ partition@740000 {
+ label = "ospi.env.backup";
+ reg = <0x740000 0x40000>;
+ };
+
+ partition@800000 {
+ label = "ospi.rootfs";
+ reg = <0x800000 0x37c0000>;
+ };
+
+ partition@3fc0000 {
+ label = "ospi.phypattern";
+ reg = <0x3fc0000 0x40000>;
+ };
+ };
};
};
--
2.17.1
next prev parent reply other threads:[~2023-05-13 14:17 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-13 14:17 [PATCH v2 0/6] arm64: dts: ti: Describe flash partitions Vaishnav Achath
2023-05-13 14:17 ` [PATCH v2 1/6] arm64: dts: ti: k3-j721e: Describe OSPI and QSPI flash partition info Vaishnav Achath
2023-05-13 14:17 ` [PATCH v2 2/6] arm64: dts: ti: k3-j721e-sk: Describe OSPI " Vaishnav Achath
2023-05-13 14:17 ` Vaishnav Achath [this message]
2023-05-13 14:17 ` [PATCH v2 4/6] arm64: dts: ti: k3-am654-baseboard: " Vaishnav Achath
2023-05-13 14:17 ` [PATCH v2 5/6] arm64: dts: ti: k3-am642-sk/evm: " Vaishnav Achath
2023-05-13 14:17 ` [PATCH v2 6/6] arm64: dts: ti: k3-am64-phycore-som: " Vaishnav Achath
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230513141712.27346-4-vaishnav.a@ti.com \
--to=vaishnav.a@ti.com \
--cc=afd@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=u-kumar1@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®