From: Yazen Ghannam <yazen.ghannam@amd.com>
To: <x86@kernel.org>
Cc: <linux-kernel@vger.kernel.org>,
<platform-driver-x86@vger.kernel.org>, <markgross@kernel.org>,
<hdegoede@redhat.com>, <Shyam-sundar.S-k@amd.com>,
<linux-edac@vger.kernel.org>, <clemens@ladisch.de>,
<jdelvare@suse.com>, <linux@roeck-us.net>,
<linux-hwmon@vger.kernel.org>, <mario.limonciello@amd.com>,
<babu.moger@amd.com>, Yazen Ghannam <yazen.ghannam@amd.com>
Subject: [PATCH 3/6] hwmon: (k10temp) Check return value of amd_smn_read()
Date: Tue, 16 May 2023 15:24:27 -0500 [thread overview]
Message-ID: <20230516202430.4157216-4-yazen.ghannam@amd.com> (raw)
In-Reply-To: <20230516202430.4157216-1-yazen.ghannam@amd.com>
Check the return value of amd_smn_read() before saving a value. This
ensures invalid values aren't saved or used.
There are three cases here with slightly different behavior.
1) read_tempreg_nb_zen():
This is a function pointer which does not include a return code.
In this case, set the register value to 0 on failure. This
enforces Read-as-Zero behavior.
2) k10temp_read_temp():
This function does have return codes, so return -EINVAL on a
failed register read. Continued operation is not necessary,
since there is no valid data from the register. Furthermore, if
the register value was set to 0, then the following operation
would underflow.
3) k10temp_get_ccd_support():
This function reads the same register from multiple CCD
instances in a loop. And a bitmask is formed if a specific bit
is set in each register instance. The loop should continue on a
failed register read, skipping the bit check.
Furthermore, the __must_check attribute will be added to amd_smn_read().
Therefore, this change is required to avoid compile-time warnings.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Cc: stable@vger.kernel.org
---
drivers/hwmon/k10temp.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index 7b177b9fbb09..6ea1fa62b7c1 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -145,8 +145,9 @@ static void read_tempreg_nb_f15(struct pci_dev *pdev, u32 *regval)
static void read_tempreg_nb_zen(struct pci_dev *pdev, u32 *regval)
{
- amd_smn_read(amd_pci_dev_to_node_id(pdev),
- ZEN_REPORTED_TEMP_CTRL_BASE, regval);
+ if (amd_smn_read(amd_pci_dev_to_node_id(pdev),
+ ZEN_REPORTED_TEMP_CTRL_BASE, regval))
+ *regval = 0;
}
static long get_raw_temp(struct k10temp_data *data)
@@ -213,9 +214,11 @@ static int k10temp_read_temp(struct device *dev, u32 attr, int channel,
*val = 0;
break;
case 2 ... 13: /* Tccd{1-12} */
- amd_smn_read(amd_pci_dev_to_node_id(data->pdev),
- ZEN_CCD_TEMP(data->ccd_offset, channel - 2),
- ®val);
+ if (amd_smn_read(amd_pci_dev_to_node_id(data->pdev),
+ ZEN_CCD_TEMP(data->ccd_offset, channel - 2),
+ ®val))
+ return -EINVAL;
+
*val = (regval & ZEN_CCD_TEMP_MASK) * 125 - 49000;
break;
default:
@@ -373,8 +376,10 @@ static void k10temp_get_ccd_support(struct pci_dev *pdev,
int i;
for (i = 0; i < limit; i++) {
- amd_smn_read(amd_pci_dev_to_node_id(pdev),
- ZEN_CCD_TEMP(data->ccd_offset, i), ®val);
+ if (amd_smn_read(amd_pci_dev_to_node_id(pdev),
+ ZEN_CCD_TEMP(data->ccd_offset, i), ®val))
+ continue;
+
if (regval & ZEN_CCD_TEMP_VALID)
data->show_temp |= BIT(TCCD_BIT(i));
}
--
2.34.1
next prev parent reply other threads:[~2023-05-16 20:25 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-16 20:24 [PATCH 0/6] Enhance AMD SMN Error Checking Yazen Ghannam
2023-05-16 20:24 ` [PATCH 1/6] EDAC/amd64: Remove unused register accesses Yazen Ghannam
2023-05-16 20:24 ` [PATCH 2/6] EDAC/amd64: Check return value of amd_smn_read() Yazen Ghannam
2023-05-16 20:24 ` Yazen Ghannam [this message]
2023-05-17 12:25 ` [PATCH 3/6] hwmon: (k10temp) " Guenter Roeck
2023-05-17 14:04 ` Yazen Ghannam
2023-05-16 20:24 ` [PATCH 4/6] x86/amd_nb: Enhance SMN access error checking Yazen Ghannam
2023-05-16 20:24 ` [PATCH 5/6] hwmon: (k10temp) Define helper function to read CCD temp Yazen Ghannam
2023-05-17 12:30 ` Guenter Roeck
2023-05-17 14:09 ` Yazen Ghannam
2023-05-16 20:24 ` [PATCH 6/6] hwmon: (k10temp) Reduce k10temp_get_ccd_support() parameters Yazen Ghannam
2023-05-17 12:33 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230516202430.4157216-4-yazen.ghannam@amd.com \
--to=yazen.ghannam@amd.com \
--cc=Shyam-sundar.S-k@amd.com \
--cc=babu.moger@amd.com \
--cc=clemens@ladisch.de \
--cc=hdegoede@redhat.com \
--cc=jdelvare@suse.com \
--cc=linux-edac@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mario.limonciello@amd.com \
--cc=markgross@kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®