From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Kan Liang <kan.liang@linux.intel.com>,
Stephane Eranian <eranian@google.com>,
Peter Zijlstra <peterz@infradead.org>,
Sasha Levin <sashal@kernel.org>,
mingo@redhat.com, acme@kernel.org, tglx@linutronix.de,
bp@alien8.de, dave.hansen@linux.intel.com, x86@kernel.org,
linux-perf-users@vger.kernel.org
Subject: [PATCH AUTOSEL 6.3 04/18] perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG
Date: Sat, 20 May 2023 14:17:36 -0400 [thread overview]
Message-ID: <20230520181750.823365-4-sashal@kernel.org> (raw)
In-Reply-To: <20230520181750.823365-1-sashal@kernel.org>
From: Kan Liang <kan.liang@linux.intel.com>
[ Upstream commit b752ea0c28e3f7f0aaaad6abf84f735eebc37a60 ]
Several similar kernel warnings can be triggered,
[56605.607840] CPU0 PEBS record size 0, expected 32, config 0 cpuc->record_size=208
when the below commands are running in parallel for a while on SPR.
while true;
do
perf record --no-buildid -a --intr-regs=AX \
-e cpu/event=0xd0,umask=0x81/pp \
-c 10003 -o /dev/null ./triad;
done &
while true;
do
perf record -o /tmp/out -W -d \
-e '{ld_blocks.store_forward:period=1000000, \
MEM_TRANS_RETIRED.LOAD_LATENCY:u:precise=2:ldlat=4}' \
-c 1037 ./triad;
done
The triad program is just the generation of loads/stores.
The warnings are triggered when an unexpected PEBS record (with a
different config and size) is found.
A system-wide PEBS event with the large PEBS config may be enabled
during a context switch. Some PEBS records for the system-wide PEBS
may be generated while the old task is sched out but the new one
hasn't been sched in yet. When the new task is sched in, the
cpuc->pebs_record_size may be updated for the per-task PEBS events. So
the existing system-wide PEBS records have a different size from the
later PEBS records.
The PEBS buffer should be flushed right before the hardware is
reprogrammed. The new size and threshold should be updated after the
old buffer has been flushed.
Reported-by: Stephane Eranian <eranian@google.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230421184529.3320912-1-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/x86/events/intel/ds.c | 56 ++++++++++++++++++-------------
arch/x86/include/asm/perf_event.h | 3 ++
2 files changed, 35 insertions(+), 24 deletions(-)
diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c
index a2e566e53076e..df88576d6b2a5 100644
--- a/arch/x86/events/intel/ds.c
+++ b/arch/x86/events/intel/ds.c
@@ -1229,12 +1229,14 @@ pebs_update_state(bool needed_cb, struct cpu_hw_events *cpuc,
struct perf_event *event, bool add)
{
struct pmu *pmu = event->pmu;
+
/*
* Make sure we get updated with the first PEBS
* event. It will trigger also during removal, but
* that does not hurt:
*/
- bool update = cpuc->n_pebs == 1;
+ if (cpuc->n_pebs == 1)
+ cpuc->pebs_data_cfg = PEBS_UPDATE_DS_SW;
if (needed_cb != pebs_needs_sched_cb(cpuc)) {
if (!needed_cb)
@@ -1242,7 +1244,7 @@ pebs_update_state(bool needed_cb, struct cpu_hw_events *cpuc,
else
perf_sched_cb_dec(pmu);
- update = true;
+ cpuc->pebs_data_cfg |= PEBS_UPDATE_DS_SW;
}
/*
@@ -1252,24 +1254,13 @@ pebs_update_state(bool needed_cb, struct cpu_hw_events *cpuc,
if (x86_pmu.intel_cap.pebs_baseline && add) {
u64 pebs_data_cfg;
- /* Clear pebs_data_cfg and pebs_record_size for first PEBS. */
- if (cpuc->n_pebs == 1) {
- cpuc->pebs_data_cfg = 0;
- cpuc->pebs_record_size = sizeof(struct pebs_basic);
- }
-
pebs_data_cfg = pebs_update_adaptive_cfg(event);
-
- /* Update pebs_record_size if new event requires more data. */
- if (pebs_data_cfg & ~cpuc->pebs_data_cfg) {
- cpuc->pebs_data_cfg |= pebs_data_cfg;
- adaptive_pebs_record_size_update();
- update = true;
- }
+ /*
+ * Be sure to update the thresholds when we change the record.
+ */
+ if (pebs_data_cfg & ~cpuc->pebs_data_cfg)
+ cpuc->pebs_data_cfg |= pebs_data_cfg | PEBS_UPDATE_DS_SW;
}
-
- if (update)
- pebs_update_threshold(cpuc);
}
void intel_pmu_pebs_add(struct perf_event *event)
@@ -1326,9 +1317,17 @@ static void intel_pmu_pebs_via_pt_enable(struct perf_event *event)
wrmsrl(base + idx, value);
}
+static inline void intel_pmu_drain_large_pebs(struct cpu_hw_events *cpuc)
+{
+ if (cpuc->n_pebs == cpuc->n_large_pebs &&
+ cpuc->n_pebs != cpuc->n_pebs_via_pt)
+ intel_pmu_drain_pebs_buffer();
+}
+
void intel_pmu_pebs_enable(struct perf_event *event)
{
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+ u64 pebs_data_cfg = cpuc->pebs_data_cfg & ~PEBS_UPDATE_DS_SW;
struct hw_perf_event *hwc = &event->hw;
struct debug_store *ds = cpuc->ds;
unsigned int idx = hwc->idx;
@@ -1344,11 +1343,22 @@ void intel_pmu_pebs_enable(struct perf_event *event)
if (x86_pmu.intel_cap.pebs_baseline) {
hwc->config |= ICL_EVENTSEL_ADAPTIVE;
- if (cpuc->pebs_data_cfg != cpuc->active_pebs_data_cfg) {
- wrmsrl(MSR_PEBS_DATA_CFG, cpuc->pebs_data_cfg);
- cpuc->active_pebs_data_cfg = cpuc->pebs_data_cfg;
+ if (pebs_data_cfg != cpuc->active_pebs_data_cfg) {
+ /*
+ * drain_pebs() assumes uniform record size;
+ * hence we need to drain when changing said
+ * size.
+ */
+ intel_pmu_drain_large_pebs(cpuc);
+ adaptive_pebs_record_size_update();
+ wrmsrl(MSR_PEBS_DATA_CFG, pebs_data_cfg);
+ cpuc->active_pebs_data_cfg = pebs_data_cfg;
}
}
+ if (cpuc->pebs_data_cfg & PEBS_UPDATE_DS_SW) {
+ cpuc->pebs_data_cfg = pebs_data_cfg;
+ pebs_update_threshold(cpuc);
+ }
if (idx >= INTEL_PMC_IDX_FIXED) {
if (x86_pmu.intel_cap.pebs_format < 5)
@@ -1391,9 +1401,7 @@ void intel_pmu_pebs_disable(struct perf_event *event)
struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
- if (cpuc->n_pebs == cpuc->n_large_pebs &&
- cpuc->n_pebs != cpuc->n_pebs_via_pt)
- intel_pmu_drain_pebs_buffer();
+ intel_pmu_drain_large_pebs(cpuc);
cpuc->pebs_enabled &= ~(1ULL << hwc->idx);
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index 8fc15ed5e60bb..abf09882f58b6 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -121,6 +121,9 @@
#define PEBS_DATACFG_LBRS BIT_ULL(3)
#define PEBS_DATACFG_LBR_SHIFT 24
+/* Steal the highest bit of pebs_data_cfg for SW usage */
+#define PEBS_UPDATE_DS_SW BIT_ULL(63)
+
/*
* Intel "Architectural Performance Monitoring" CPUID
* detection/enumeration details:
--
2.39.2
next prev parent reply other threads:[~2023-05-20 18:18 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-20 18:17 [PATCH AUTOSEL 6.3 01/18] drm/ast: Fix ARM compatibility Sasha Levin
2023-05-20 18:17 ` [PATCH AUTOSEL 6.3 02/18] btrfs: abort transaction when sibling keys check fails for leaves Sasha Levin
2023-05-20 18:17 ` [PATCH AUTOSEL 6.3 03/18] ARM: 9295/1: unwind:fix unwind abort for uleb128 case Sasha Levin
2023-05-20 18:17 ` Sasha Levin [this message]
2023-05-20 18:17 ` [PATCH AUTOSEL 6.3 05/18] hwmon: (k10temp) Add PCI ID for family 19, model 78h Sasha Levin
2023-05-20 18:17 ` [PATCH AUTOSEL 6.3 06/18] media: rcar-vin: Gen3 can not scale NV12 Sasha Levin
2023-05-20 18:17 ` [PATCH AUTOSEL 6.3 07/18] media: rcar-vin: Fix NV12 size alignment Sasha Levin
2023-05-20 18:17 ` [PATCH AUTOSEL 6.3 08/18] media: rcar-vin: Select correct interrupt mode for V4L2_FIELD_ALTERNATE Sasha Levin
2023-05-20 18:17 ` [PATCH AUTOSEL 6.3 09/18] platform/x86: intel_scu_pcidrv: Add back PCI ID for Medfield Sasha Levin
2023-05-20 18:17 ` [PATCH AUTOSEL 6.3 10/18] platform/mellanox: fix potential race in mlxbf-tmfifo driver Sasha Levin
2023-05-20 18:17 ` [PATCH AUTOSEL 6.3 11/18] gfs2: Don't deref jdesc in evict Sasha Levin
2023-05-20 18:17 ` [PATCH AUTOSEL 6.3 12/18] drm/amdgpu/nv: update VCN 3 max HEVC encoding resolution Sasha Levin
2023-05-20 18:17 ` [PATCH AUTOSEL 6.3 13/18] drm/amdgpu: set gfx9 onwards APU atomics support to be true Sasha Levin
2023-05-20 18:17 ` [PATCH AUTOSEL 6.3 14/18] fbdev: imsttfb: Fix use after free bug in imsttfb_probe Sasha Levin
2023-05-20 18:17 ` [PATCH AUTOSEL 6.3 15/18] fbdev: modedb: Add 1920x1080 at 60 Hz video mode Sasha Levin
2023-05-20 18:17 ` [PATCH AUTOSEL 6.3 16/18] fbdev: stifb: Fix info entry in sti_struct on error path Sasha Levin
2023-05-20 18:17 ` [PATCH AUTOSEL 6.3 17/18] nbd: Fix debugfs_create_dir error checking Sasha Levin
2023-05-20 18:17 ` [PATCH AUTOSEL 6.3 18/18] block/rnbd: replace REQ_OP_FLUSH with REQ_OP_WRITE Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230520181750.823365-4-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=acme@kernel.org \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=eranian@google.com \
--cc=kan.liang@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-perf-users@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=stable@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome