From: Feng Tang <feng.tang@intel.com>
To: John Stultz <jstultz@google.com>,
Thomas Gleixner <tglx@linutronix.de>,
Stephen Boyd <sboyd@kernel.org>,
linux-kernel@vger.kernel.org
Cc: paulmck@kernel.org, Feng Tang <feng.tang@intel.com>
Subject: [PATCH] clocksource: Add a helper fucntion to reduce code duplication
Date: Wed, 24 May 2023 12:07:33 +0800 [thread overview]
Message-ID: <20230524040733.66946-1-feng.tang@intel.com> (raw)
Several places use the same pattern of 'clocksource_delta() +
clocksource_cyc2ns()' for calcualating the time delta in nanoseconds
from 2 counters read from a clocksource. Add a helper function to
simplify the code.
signe-off-by: Feng Tang <feng.tang@intel.com>
---
kernel/time/clocksource.c | 36 +++++++++++++++++++++---------------
1 file changed, 21 insertions(+), 15 deletions(-)
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 91836b727cef..9f9e25cf5b44 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -145,6 +145,18 @@ static inline void clocksource_watchdog_unlock(unsigned long *flags)
spin_unlock_irqrestore(&watchdog_lock, *flags);
}
+
+/*
+ * Calculate the delta of 2 counters read from a clocksource, and convert
+ * it to nanoseconds. Intended only for short time interval calculation.
+ */
+static inline u64 calc_counters_to_delta_ns(u64 new, u64 old, struct clocksource *cs)
+{
+ u64 delta = clocksource_delta(new, old, cs->mask);
+
+ return clocksource_cyc2ns(delta, cs->mult, cs->shift);
+}
+
static int clocksource_watchdog_kthread(void *data);
static void __clocksource_change_rating(struct clocksource *cs, int rating);
@@ -223,7 +235,7 @@ enum wd_read_status {
static enum wd_read_status cs_watchdog_read(struct clocksource *cs, u64 *csnow, u64 *wdnow)
{
unsigned int nretries;
- u64 wd_end, wd_end2, wd_delta;
+ u64 wd_end, wd_end2;
int64_t wd_delay, wd_seq_delay;
for (nretries = 0; nretries <= max_cswd_read_retries; nretries++) {
@@ -234,9 +246,7 @@ static enum wd_read_status cs_watchdog_read(struct clocksource *cs, u64 *csnow,
wd_end2 = watchdog->read(watchdog);
local_irq_enable();
- wd_delta = clocksource_delta(wd_end, *wdnow, watchdog->mask);
- wd_delay = clocksource_cyc2ns(wd_delta, watchdog->mult,
- watchdog->shift);
+ wd_delay = calc_counters_to_delta_ns(wd_end, *wdnow, watchdog);
if (wd_delay <= WATCHDOG_MAX_SKEW) {
if (nretries > 1 || nretries >= max_cswd_read_retries) {
pr_warn("timekeeping watchdog on CPU%d: %s retried %d times before success\n",
@@ -254,8 +264,8 @@ static enum wd_read_status cs_watchdog_read(struct clocksource *cs, u64 *csnow,
* report system busy, reinit the watchdog and skip the current
* watchdog test.
*/
- wd_delta = clocksource_delta(wd_end2, wd_end, watchdog->mask);
- wd_seq_delay = clocksource_cyc2ns(wd_delta, watchdog->mult, watchdog->shift);
+
+ wd_seq_delay = calc_counters_to_delta_ns(wd_end2, wd_end, watchdog);
if (wd_seq_delay > WATCHDOG_MAX_SKEW/2)
goto skip_test;
}
@@ -366,8 +376,8 @@ void clocksource_verify_percpu(struct clocksource *cs)
delta = (csnow_end - csnow_mid) & cs->mask;
if (delta < 0)
cpumask_set_cpu(cpu, &cpus_ahead);
- delta = clocksource_delta(csnow_end, csnow_begin, cs->mask);
- cs_nsec = clocksource_cyc2ns(delta, cs->mult, cs->shift);
+
+ cs_nsec = calc_counters_to_delta_ns(csnow_end, csnow_begin, cs);
if (cs_nsec > cs_nsec_max)
cs_nsec_max = cs_nsec;
if (cs_nsec < cs_nsec_min)
@@ -398,7 +408,7 @@ static inline void clocksource_reset_watchdog(void)
static void clocksource_watchdog(struct timer_list *unused)
{
- u64 csnow, wdnow, cslast, wdlast, delta;
+ u64 csnow, wdnow, cslast, wdlast;
int next_cpu, reset_pending;
int64_t wd_nsec, cs_nsec;
struct clocksource *cs;
@@ -456,14 +466,10 @@ static void clocksource_watchdog(struct timer_list *unused)
continue;
}
- delta = clocksource_delta(wdnow, cs->wd_last, watchdog->mask);
- wd_nsec = clocksource_cyc2ns(delta, watchdog->mult,
- watchdog->shift);
-
- delta = clocksource_delta(csnow, cs->cs_last, cs->mask);
- cs_nsec = clocksource_cyc2ns(delta, cs->mult, cs->shift);
wdlast = cs->wd_last; /* save these in case we print them */
cslast = cs->cs_last;
+ wd_nsec = calc_counters_to_delta_ns(wdnow, wdlast, watchdog);
+ cs_nsec = calc_counters_to_delta_ns(csnow, cslast, cs);
cs->cs_last = csnow;
cs->wd_last = wdnow;
--
2.27.0
next reply other threads:[~2023-05-24 4:08 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-24 4:07 Feng Tang [this message]
2023-05-24 4:39 ` John Stultz
2023-05-24 4:54 ` Feng Tang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230524040733.66946-1-feng.tang@intel.com \
--to=feng.tang@intel.com \
--cc=jstultz@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=paulmck@kernel.org \
--cc=sboyd@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®