From: Julien Stephan <jstephan@baylibre.com>
To: unlisted-recipients:; (no To-header on input)
Cc: mkorpershoek@baylibre.com, khilman@baylibre.com,
Florian Sylvestre <fsylvestre@baylibre.com>,
Julien Stephan <jstephan@baylibre.com>,
Andy Hsieh <andy.hsieh@mediatek.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Chun-Kuang Hu <chunkuang.hu@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org,
Kishon Vijay Abraham I <kishon@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
linux-phy@lists.infradead.org,
Matthias Brugger <matthias.bgg@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>, Vinod Koul <vkoul@kernel.org>
Subject: [PATCH v3 2/3] dt-bindings: phy: add mediatek MIPI CD-PHY module v0.5
Date: Wed, 24 May 2023 10:30:31 +0200 [thread overview]
Message-ID: <20230524083033.486490-3-jstephan@baylibre.com> (raw)
In-Reply-To: <20230524083033.486490-1-jstephan@baylibre.com>
From: Florian Sylvestre <fsylvestre@baylibre.com>
This adds the bindings, for the MIPI CD-PHY module v0.5 embedded in
some Mediatek soc, such as the mt8365
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
---
.../bindings/phy/mediatek,mt8365-csi-rx.yaml | 67 +++++++++++++++++++
MAINTAINERS | 6 ++
2 files changed, 73 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml
diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml
new file mode 100644
index 000000000000..a1bd96a98051
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 MediaTek, BayLibre
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/mediatek,mt8365-csi-rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Sensor Interface MIPI CSI CD-PHY
+
+maintainers:
+ - Julien Stephan <jstephan@baylibre.com>
+ - Andy Hsieh <andy.hsieh@mediatek.com>
+
+description:
+ The SENINF CD-PHY is a set of CD-PHY connected to the SENINF CSI-2
+ receivers. The number of PHYs depends on the SoC model.
+ Depending on the SoC model, each PHYs can be either CD-PHY or D-PHY only
+ capable.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt8365-csi-rx
+
+ reg:
+ maxItems: 1
+
+ '#phy-cells':
+ const: 0
+
+ mediatek,phy-type:
+ description:
+ Specify the phy type. Supported phy are D-PHY only or CD-PHY capable phys.
+ See include/dt-bindings/phy/phy.h for constants.
+ enum: [10, 13]
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+ - mediatek,phy-type
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/phy/phy.h>
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ csi0_rx: phy@11c10000 {
+ compatible = "mediatek,mt8365-csi-rx";
+ reg = <0 0x11c10000 0 0x2000>;
+ mediatek,phy-type = <PHY_TYPE_CDPHY>;
+ #phy-cells = <0>;
+ };
+
+ csi1_rx: phy@11c12000 {
+ compatible = "mediatek,mt8365-csi-rx";
+ reg = <0 0x11c12000 0 0x2000>;
+ mediatek,phy-type = <PHY_TYPE_DPHY>;
+ #phy-cells = <0>;
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index b81e9fcc66cb..5da594fbb761 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13184,6 +13184,12 @@ F: Documentation/devicetree/bindings/media/mediatek-vpu.txt
F: drivers/media/platform/mediatek/vcodec/
F: drivers/media/platform/mediatek/vpu/
+MEDIATEK MIPI-CSI CDPHY DRIVER
+M: Julien Stephan <jstephan@baylibre.com>
+M: Andy Hsieh <andy.hsieh@mediatek.com>
+S: Supported
+F: Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml
+
MEDIATEK MMC/SD/SDIO DRIVER
M: Chaotian Jing <chaotian.jing@mediatek.com>
S: Maintained
--
2.40.1
next prev parent reply other threads:[~2023-05-24 8:30 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-24 8:30 [PATCH v3 0/3] phy: mtk-mipi-csi: add driver for CSI phy Julien Stephan
2023-05-24 8:30 ` [PATCH v3 1/3] dt-bindings: phy: add PHY_TYPE_CDPHY definition Julien Stephan
2023-05-24 9:45 ` AngeloGioacchino Del Regno
2023-06-03 19:09 ` Krzysztof Kozlowski
2023-05-24 8:30 ` Julien Stephan [this message]
2023-05-24 9:45 ` [PATCH v3 2/3] dt-bindings: phy: add mediatek MIPI CD-PHY module v0.5 AngeloGioacchino Del Regno
2023-05-24 14:05 ` Julien Stephan
2023-06-08 20:05 ` Rob Herring
2023-05-24 8:30 ` [PATCH v3 3/3] phy: mtk-mipi-csi: add driver for CSI phy Julien Stephan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230524083033.486490-3-jstephan@baylibre.com \
--to=jstephan@baylibre.com \
--cc=andy.hsieh@mediatek.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=chunfeng.yun@mediatek.com \
--cc=chunkuang.hu@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=fsylvestre@baylibre.com \
--cc=khilman@baylibre.com \
--cc=kishon@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-phy@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=mkorpershoek@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®