mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Robert Marko <robimarko@gmail.com>,
	agross@kernel.org, ilia.lin@kernel.org, rafael@kernel.org,
	viresh.kumar@linaro.org, linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
	ansuelsmth@gmail.com
Subject: Re: [PATCH v4 5/5] cpufreq: qcom-nvmem: use helper to get SMEM SoC ID
Date: Thu, 25 May 2023 19:43:17 -0700	[thread overview]
Message-ID: <20230526024317.3t6nfv2aw27mrlj5@ripper> (raw)
In-Reply-To: <5382b518-7691-ee70-c522-9ce0b14d60c1@linaro.org>

On Fri, May 26, 2023 at 01:18:02AM +0200, Konrad Dybcio wrote:
> 
> 
> On 25.05.2023 23:02, Robert Marko wrote:
> > Now that SMEM exports a helper to get the SMEM SoC ID lets utilize it.
> > Currently qcom_cpufreq_get_msm_id() is encoding the returned SMEM SoC ID
> > into an enum, however there is no reason to do so and we can just match
> > directly on the SMEM SoC ID as returned by qcom_smem_get_soc_id().
> > 
> > Signed-off-by: Robert Marko <robimarko@gmail.com>
> > Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
> > ---
> > Changes in v4:
> > * Adapt to name change to qcom_smem_get_soc_id()
> > 
> > Changes in v3:
> > * Adapt to helper using argument now
> > 
> > Changes in v2:
> > * Utilize helper exported by SMEM instead of refactoring
> > qcom_cpufreq_get_msm_id()
> > ---
> >  drivers/cpufreq/qcom-cpufreq-nvmem.c | 56 +++++-----------------------
> >  1 file changed, 10 insertions(+), 46 deletions(-)
> > 
> > diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> > index 60e99be2d3db..a88b6fe5db50 100644
> > --- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
> > +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> > @@ -29,16 +29,8 @@
> >  #include <linux/slab.h>
> >  #include <linux/soc/qcom/smem.h>
> >  
> > -#define MSM_ID_SMEM	137
> > -
> >  #include <dt-bindings/arm/qcom,ids.h>
> >  
> > -enum _msm8996_version {
> > -	MSM8996_V3,
> > -	MSM8996_SG,
> > -	NUM_OF_MSM8996_VERSIONS,
> > -};
> > -
> >  struct qcom_cpufreq_drv;
> >  
> >  struct qcom_cpufreq_match_data {
> > @@ -135,60 +127,32 @@ static void get_krait_bin_format_b(struct device *cpu_dev,
> >  	dev_dbg(cpu_dev, "PVS version: %d\n", *pvs_ver);
> >  }
> >  
> > -static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
> > -{
> > -	size_t len;
> > -	u32 *msm_id;
> > -	enum _msm8996_version version;
> > -
> > -	msm_id = qcom_smem_get(QCOM_SMEM_HOST_ANY, MSM_ID_SMEM, &len);
> > -	if (IS_ERR(msm_id))
> > -		return NUM_OF_MSM8996_VERSIONS;
> > -
> > -	/* The first 4 bytes are format, next to them is the actual msm-id */
> > -	msm_id++;
> > -
> > -	switch ((enum _msm_id)*msm_id) {
> > -	case QCOM_ID_MSM8996:
> > -	case QCOM_ID_APQ8096:
> > -		version = MSM8996_V3;
> > -		break;
> > -	case QCOM_ID_MSM8996SG:
> > -	case QCOM_ID_APQ8096SG:
> > -		version = MSM8996_SG;
> > -		break;
> > -	default:
> > -		version = NUM_OF_MSM8996_VERSIONS;
> > -	}
> > -
> > -	return version;
> > -}
> > -
> >  static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
> >  					  struct nvmem_cell *speedbin_nvmem,
> >  					  char **pvs_name,
> >  					  struct qcom_cpufreq_drv *drv)
> >  {
> >  	size_t len;
> > +	u32 msm_id;
> __le32
> 
> >  	u8 *speedbin;
> > -	enum _msm8996_version msm8996_version;
> > +	int ret;
> >  	*pvs_name = NULL;
> >  
> > -	msm8996_version = qcom_cpufreq_get_msm_id();
> > -	if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
> > -		dev_err(cpu_dev, "Not Snapdragon 820/821!");
> > -		return -ENODEV;
> > -	}
> > +	ret = qcom_smem_get_soc_id(&msm_id);
> > +	if (ret)
> > +		return ret;
> Now since it can return a PTR_ERR, you should check for IS_ERR
> and return ERR_PTR if that happens

No, the PTR_ERR() extracted the error value out of the pointer, so it's
just an integer now (or zero on success). So this is looking correct to
me.

> 
> LGTM otherwise!
> 
> Konrad
> >  
> >  	speedbin = nvmem_cell_read(speedbin_nvmem, &len);
> >  	if (IS_ERR(speedbin))
> >  		return PTR_ERR(speedbin);
> >  
> > -	switch (msm8996_version) {
> > -	case MSM8996_V3:
> > +	switch (msm_id) {
> > +	case QCOM_ID_MSM8996:

And here are those cpu-endian constants... If msm_id is a __le32 then
all these constants needs to be cpu_to_le32().

Regards,
Bjorn

> > +	case QCOM_ID_APQ8096:
> >  		drv->versions = 1 << (unsigned int)(*speedbin);
> >  		break;
> > -	case MSM8996_SG:
> > +	case QCOM_ID_MSM8996SG:
> > +	case QCOM_ID_APQ8096SG:
> >  		drv->versions = 1 << ((unsigned int)(*speedbin) + 4);
> >  		break;
> >  	default:

  reply	other threads:[~2023-05-26  2:39 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-25 21:02 [PATCH v4 1/5] soc: qcom: socinfo: move SMEM item struct and defines to a header Robert Marko
2023-05-25 21:02 ` [PATCH v4 2/5] soc: qcom: smem: Switch to EXPORT_SYMBOL_GPL() Robert Marko
2023-05-25 21:02 ` [PATCH v4 3/5] soc: qcom: smem: introduce qcom_smem_get_soc_id() Robert Marko
2023-05-25 23:18   ` Konrad Dybcio
2023-05-26  2:33     ` Bjorn Andersson
2023-05-26  8:42       ` Konrad Dybcio
2023-05-26 19:04   ` Bjorn Andersson
2023-05-25 21:02 ` [PATCH v4 4/5] cpufreq: qcom-nvmem: use SoC ID-s from bindings Robert Marko
2023-05-25 21:02 ` [PATCH v4 5/5] cpufreq: qcom-nvmem: use helper to get SMEM SoC ID Robert Marko
2023-05-25 23:18   ` Konrad Dybcio
2023-05-26  2:43     ` Bjorn Andersson [this message]
2023-05-26  8:44       ` Konrad Dybcio
2023-05-25 23:13 ` [PATCH v4 1/5] soc: qcom: socinfo: move SMEM item struct and defines to a header Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230526024317.3t6nfv2aw27mrlj5@ripper \
    --to=andersson@kernel.org \
    --cc=agross@kernel.org \
    --cc=ansuelsmth@gmail.com \
    --cc=ilia.lin@kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rafael@kernel.org \
    --cc=robimarko@gmail.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®