mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: wei.fang@nxp.com
To: claudiu.manoil@nxp.com, vladimir.oltean@nxp.com,
	davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
	pabeni@redhat.com, maciej.fijalkowski@intel.com,
	netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH V2 net] net: enetc: correct the indexes of highest and 2nd highest TCs
Date: Wed,  7 Jun 2023 17:10:48 +0800	[thread overview]
Message-ID: <20230607091048.1152674-1-wei.fang@nxp.com> (raw)

From: Wei Fang <wei.fang@nxp.com>

For ENETC hardware, the TCs are numbered from 0 to N-1, where N
is the number of TCs. Numerically higher TC has higher priority.
It's obvious that the highest priority TC index should be N-1 and
the 2nd highest priority TC index should be N-2.

However, the previous logic uses netdev_get_prio_tc_map() to get
the indexes of highest priority and 2nd highest priority TCs, it
does not make sense and is incorrect to give a "tc" argument to
netdev_get_prio_tc_map(). So the driver may get the wrong indexes
of the two highest priotiry TCs which would lead to failed to set
the CBS for the two highest priotiry TCs.

e.g.
$ tc qdisc add dev eno0 parent root handle 100: mqprio num_tc 6 \
	map 0 0 1 1 2 3 4 5 queues 1@0 1@1 1@2 1@3 2@4 2@6 hw 1
$ tc qdisc replace dev eno0 parent 100:6 cbs idleslope 100000 \
	sendslope -900000 hicredit 12 locredit -113 offload 1
$ Error: Specified device failed to setup cbs hardware offload.
  ^^^^^

In this example, the previous logic deems the indexes of the two
highest priotiry TCs should be 3 and 2. Actually, the indexes are
5 and 4, because the number of TCs is 6. So it would be failed to
configure the CBS for the two highest priority TCs.

Fixes: c431047c4efe ("enetc: add support Credit Based Shaper(CBS) for hardware offload")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
V2:
Improved the commit message based on Maciej's comments.
---
 drivers/net/ethernet/freescale/enetc/enetc_qos.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc_qos.c b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
index 83c27bbbc6ed..126007ab70f6 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_qos.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
@@ -181,8 +181,8 @@ int enetc_setup_tc_cbs(struct net_device *ndev, void *type_data)
 	int bw_sum = 0;
 	u8 bw;
 
-	prio_top = netdev_get_prio_tc_map(ndev, tc_nums - 1);
-	prio_next = netdev_get_prio_tc_map(ndev, tc_nums - 2);
+	prio_top = tc_nums - 1;
+	prio_next = tc_nums - 2;
 
 	/* Support highest prio and second prio tc in cbs mode */
 	if (tc != prio_top && tc != prio_next)
-- 
2.25.1


             reply	other threads:[~2023-06-07  9:16 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-07  9:10 wei.fang [this message]
2023-06-07 11:07 ` Maciej Fijalkowski
2023-06-08 20:00 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230607091048.1152674-1-wei.fang@nxp.com \
    --to=wei.fang@nxp.com \
    --cc=claudiu.manoil@nxp.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maciej.fijalkowski@intel.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome