From: Dario Binacchi <dario.binacchi@amarulasolutions.com>
To: linux-kernel@vger.kernel.org
Cc: michael@amarulasolutions.com,
Amarula patchwork <linux-amarula@amarulasolutions.com>,
Dario Binacchi <dario.binacchi@amarulasolutions.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Conor Dooley <conor+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-stm32@st-md-mailman.stormreply.com
Subject: [PATCH v3 2/4] ARM: dts: stm32: add pin map for LTDC on stm32f7
Date: Fri, 9 Jun 2023 08:20:48 +0200 [thread overview]
Message-ID: <20230609062050.2107143-3-dario.binacchi@amarulasolutions.com> (raw)
In-Reply-To: <20230609062050.2107143-1-dario.binacchi@amarulasolutions.com>
Add pin configurations for using LTDC (LCD-tft Display Controller) on
stm32f746-disco board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
Changes in v3:
- rename ltdc-pins-a-0 to ltdc-0.
arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
index 9f65403295ca..36dad40dd0c7 100644
--- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
@@ -365,6 +365,41 @@ pins2 {
bias-pull-up;
};
};
+
+
+ ltdc_pins_a: ltdc-0 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 4, AF14)>, /* LCD_B0 */
+ <STM32_PINMUX('G',12, AF9)>, /* LCD_B4 */
+ <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */
+ <STM32_PINMUX('I',10, AF14)>, /* LCD_HSYNC */
+ <STM32_PINMUX('I',14, AF14)>, /* LCD_CLK */
+ <STM32_PINMUX('I',15, AF14)>, /* LCD_R0 */
+ <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
+ <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
+ <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
+ <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
+ <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
+ <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */
+ <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
+ <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
+ <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
+ <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
+ <STM32_PINMUX('J',10, AF14)>, /* LCD_G3 */
+ <STM32_PINMUX('J',11, AF14)>, /* LCD_G4 */
+ <STM32_PINMUX('J',13, AF14)>, /* LCD_B1 */
+ <STM32_PINMUX('J',14, AF14)>, /* LCD_B2 */
+ <STM32_PINMUX('J',15, AF14)>, /* LCD_B3 */
+ <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
+ <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
+ <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
+ <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
+ <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
+ <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */
+ <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */
+ slew-rate = <2>;
+ };
+ };
};
};
};
--
2.32.0
next prev parent reply other threads:[~2023-06-09 6:21 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-09 6:20 [PATCH v3 0/4] Add display support on the stm32f746-disco board Dario Binacchi
2023-06-09 6:20 ` [PATCH v3 1/4] ARM: dts: stm32: add ltdc support on stm32f746 MCU Dario Binacchi
2023-06-09 14:17 ` [Linux-stm32] " Raphael Gallais-Pou
2023-06-09 6:20 ` Dario Binacchi [this message]
2023-06-09 14:23 ` [Linux-stm32] [PATCH v3 2/4] ARM: dts: stm32: add pin map for LTDC on stm32f7 Raphael Gallais-Pou
2023-06-09 6:20 ` [PATCH v3 3/4] ARM: dts: stm32: support display on stm32f746-disco board Dario Binacchi
2023-06-09 14:25 ` [Linux-stm32] " Raphael Gallais-Pou
2023-06-09 6:20 ` [PATCH v3 4/4] drm/stm: add an option to change FB bpp Dario Binacchi
2023-06-13 14:41 ` Philippe CORNU
2023-06-13 14:52 ` Michael Nazzareno Trimarchi
2023-06-13 15:26 ` Raphael Gallais-Pou
2023-06-13 16:59 ` Philippe CORNU
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230609062050.2107143-3-dario.binacchi@amarulasolutions.com \
--to=dario.binacchi@amarulasolutions.com \
--cc=alexandre.torgue@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=michael@amarulasolutions.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®