mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Christian Marangi <ansuelsmth@gmail.com>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Jose Abreu <joabreu@synopsys.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	Christian Marangi <ansuelsmth@gmail.com>,
	netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Jose Abreu <Jose.Abreu@synopsys.com>, stable@vger.kernel.org
Subject: [net PATCH v2] net: ethernet: stmicro: stmmac: fix possible memory leak in __stmmac_open
Date: Wed, 14 Jun 2023 11:17:14 +0200	[thread overview]
Message-ID: <20230614091714.15912-1-ansuelsmth@gmail.com> (raw)

Fix a possible memory leak in __stmmac_open when stmmac_init_phy fails.
It's also needed to free everything allocated by stmmac_setup_dma_desc
and not just the dma_conf struct.

Drop free_dma_desc_resources from __stmmac_open and correctly call
free_dma_desc_resources on each user of __stmmac_open on error.

Reported-by: Jose Abreu <Jose.Abreu@synopsys.com>
Fixes: ba39b344e924 ("net: ethernet: stmicro: stmmac: generate stmmac dma conf before open")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
---

Changes v2:
- Move free_dma_desc_resources to each user of __stmmac_open

 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index fa07b0d50b46..5c645b6d5660 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3877,7 +3877,6 @@ static int __stmmac_open(struct net_device *dev,
 
 	stmmac_hw_teardown(dev);
 init_error:
-	free_dma_desc_resources(priv, &priv->dma_conf);
 	phylink_disconnect_phy(priv->phylink);
 init_phy_error:
 	pm_runtime_put(priv->device);
@@ -3895,6 +3894,9 @@ static int stmmac_open(struct net_device *dev)
 		return PTR_ERR(dma_conf);
 
 	ret = __stmmac_open(dev, dma_conf);
+	if (ret)
+		free_dma_desc_resources(priv, dma_conf);
+
 	kfree(dma_conf);
 	return ret;
 }
@@ -5637,12 +5639,15 @@ static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
 		stmmac_release(dev);
 
 		ret = __stmmac_open(dev, dma_conf);
-		kfree(dma_conf);
 		if (ret) {
+			free_dma_desc_resources(priv, dma_conf);
+			kfree(dma_conf);
 			netdev_err(priv->dev, "failed reopening the interface after MTU change\n");
 			return ret;
 		}
 
+		kfree(dma_conf);
+
 		stmmac_set_rx_mode(dev);
 	}
 
-- 
2.40.1


             reply	other threads:[~2023-06-14 15:53 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-14  9:17 Christian Marangi [this message]
2023-06-14 19:17 ` Simon Horman
2023-06-15  6:18 ` Jose Abreu
2023-06-15 22:10 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230614091714.15912-1-ansuelsmth@gmail.com \
    --to=ansuelsmth@gmail.com \
    --cc=Jose.Abreu@synopsys.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=joabreu@synopsys.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=linux@armlinux.org.uk \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=peppe.cavallaro@st.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome