[PATCH net resend] net: qca_spi: Avoid high load if QCA7000 is not available

[Stefan Wahren <stefan.wahren@chargebyte.com>]

In case the QCA7000 is not available via SPI (e.g. in reset),
the driver will cause a high load. The reason for this is
that the synchronization is never finished and schedule()
is never called. Since the synchronization is not timing
critical, it's safe to drop this from the scheduling condition.

Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com>
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for
 QCA7000")
---
 drivers/net/ethernet/qualcomm/qca_spi.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c
 b/drivers/net/ethernet/qualcomm/qca_spi.c
index bba1947792ea16..90f18ea4c28ba1 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -582,8 +582,7 @@ qcaspi_spi_thread(void *data)
 	while (!kthread_should_stop()) {
 		set_current_state(TASK_INTERRUPTIBLE);
 		if ((qca->intr_req == qca->intr_svc) &&
-		    (qca->txr.skb[qca->txr.head] == NULL) &&
-		    (qca->sync == QCASPI_SYNC_READY))
+		    !qca->txr.skb[qca->txr.head])
 			schedule();
 
 		set_current_state(TASK_RUNNING);