mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Pawel Dembicki <paweldembicki@gmail.com>
To: netdev@vger.kernel.org
Cc: linus.walleij@linaro.org,
	Pawel Dembicki <paweldembicki@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH net-next 2/6] net: dsa: vsc73xx: add port_stp_state_set function
Date: Wed, 21 Jun 2023 21:12:58 +0200	[thread overview]
Message-ID: <20230621191302.1405623-2-paweldembicki@gmail.com> (raw)
In-Reply-To: <20230621191302.1405623-1-paweldembicki@gmail.com>

This isn't fully functional implementation of 802.1D, but
port_stp_state_set is required for future tag8021q operations.

This implementation handle properly all states, but vsc 73xx don't
forward STP packets.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
 drivers/net/dsa/vitesse-vsc73xx-core.c | 51 +++++++++++++++++++++++---
 drivers/net/dsa/vitesse-vsc73xx.h      |  1 +
 2 files changed, 46 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c
index e853b57b0bc8..ce22bd5fa8df 100644
--- a/drivers/net/dsa/vitesse-vsc73xx-core.c
+++ b/drivers/net/dsa/vitesse-vsc73xx-core.c
@@ -165,6 +165,10 @@
 #define VSC73XX_AGENCTRL	0xf0
 #define VSC73XX_CAPRST		0xff
 
+#define VSC73XX_SRCMASKS_CPU_COPY		BIT(27)
+#define VSC73XX_SRCMASKS_MIRROR			BIT(26)
+#define VSC73XX_SRCMASKS_PORTS_MASK		GENMASK(7, 0)
+
 #define VSC73XX_MACACCESS_CPU_COPY		BIT(14)
 #define VSC73XX_MACACCESS_FWD_KILL		BIT(13)
 #define VSC73XX_MACACCESS_IGNORE_VLAN		BIT(12)
@@ -621,15 +625,17 @@ static int vsc73xx_setup(struct dsa_switch *ds)
 	vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GMIIDELAY,
 		      VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS |
 		      VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS);
-	/* Enable reception of frames on all ports */
-	vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_RECVMASK,
-		      0x5f);
 	/* IP multicast flood mask (table 144) */
 	vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_IFLODMSK,
 		      0xff);
 
 	mdelay(50);
 
+	/*configure forward map to CPU <-> port only*/
+	for (i = 0; i < vsc->ds->num_ports; i++)
+		vsc->forward_map[i] = VSC73XX_SRCMASKS_PORTS_MASK & BIT(CPU_PORT);
+	vsc->forward_map[CPU_PORT] = VSC73XX_SRCMASKS_PORTS_MASK & ~BIT(CPU_PORT);
+
 	/* Release reset from the internal PHYs */
 	vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
 		      VSC73XX_GLORESET_PHY_RESET);
@@ -885,9 +891,6 @@ static void vsc73xx_phylink_mac_link_up(struct dsa_switch *ds, int port,
 		break;
 	}
 
-	/* Enable port (forwarding) in the receieve mask */
-	vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
-			    VSC73XX_RECVMASK, BIT(port), BIT(port));
 	vsc73xx_adjust_enable_port(vsc, port, val);
 }
 
@@ -1054,6 +1057,41 @@ static int vsc73xx_get_max_mtu(struct dsa_switch *ds, int port)
 	return 9600;
 }
 
+static void vsc73xx_port_stp_state_set(struct dsa_switch *ds, int port,
+				       u8 state)
+{
+	struct vsc73xx *vsc = ds->priv;
+	/* FIXME: STP frames isn't forwarded at this moment. BPDU frames are
+	 * forwarded only from to PI/SI interface. For more info see chapter
+	 * 2.7.1 (CPU Forwarding) in datasheet.
+	 * This function is required for tag8021q operations.
+	 */
+
+	if (state == BR_STATE_BLOCKING)
+		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+				    VSC73XX_RECVMASK, BIT(port), 0);
+	else
+		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+				    VSC73XX_RECVMASK, BIT(port), BIT(port));
+
+	if (state == BR_STATE_LEARNING || state == BR_STATE_FORWARDING)
+		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+				    VSC73XX_LEARNMASK, BIT(port), BIT(port));
+	else
+		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+				    VSC73XX_LEARNMASK, BIT(port), 0);
+
+	if (state == BR_STATE_FORWARDING)
+		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+				    VSC73XX_SRCMASKS + port,
+				    VSC73XX_SRCMASKS_PORTS_MASK,
+				    vsc->forward_map[port]);
+	else
+		vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+				    VSC73XX_SRCMASKS + port,
+				    VSC73XX_SRCMASKS_PORTS_MASK, 0);
+}
+
 static const struct dsa_switch_ops vsc73xx_ds_ops = {
 	.get_tag_protocol = vsc73xx_get_tag_protocol,
 	.setup = vsc73xx_setup,
@@ -1070,6 +1108,7 @@ static const struct dsa_switch_ops vsc73xx_ds_ops = {
 	.port_disable = vsc73xx_port_disable,
 	.port_change_mtu = vsc73xx_change_mtu,
 	.port_max_mtu = vsc73xx_get_max_mtu,
+	.port_stp_state_set = vsc73xx_port_stp_state_set,
 };
 
 static int vsc73xx_gpio_get(struct gpio_chip *chip, unsigned int offset)
diff --git a/drivers/net/dsa/vitesse-vsc73xx.h b/drivers/net/dsa/vitesse-vsc73xx.h
index 30b1f0a36566..1552a9ca06ff 100644
--- a/drivers/net/dsa/vitesse-vsc73xx.h
+++ b/drivers/net/dsa/vitesse-vsc73xx.h
@@ -15,6 +15,7 @@ struct vsc73xx {
 	u8				addr[ETH_ALEN];
 	const struct vsc73xx_ops	*ops;
 	void				*priv;
+	u8				forward_map[8];
 };
 
 struct vsc73xx_ops {
-- 
2.34.1


  reply	other threads:[~2023-06-21 19:14 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-21 19:12 [PATCH net-next 1/6] net: dsa: vsc73xx: convert to PHYLINK Pawel Dembicki
2023-06-21 19:12 ` Pawel Dembicki [this message]
2023-06-21 19:33   ` [PATCH net-next 2/6] net: dsa: vsc73xx: add port_stp_state_set function Andrew Lunn
2023-06-21 20:38     ` Paweł Dembicki
2023-06-22 13:01       ` Andrew Lunn
2023-06-22 13:06         ` Vladimir Oltean
2023-06-21 21:27     ` Linus Walleij
2023-06-25 11:21       ` Vladimir Oltean
2023-06-25 11:47         ` Paweł Dembicki
2023-06-21 21:28   ` Linus Walleij
2023-06-22 17:24   ` Jakub Kicinski
2023-06-21 19:12 ` [PATCH net-next 3/6] net: dsa: vsc73xx: Add dsa tagging based on 8021q Pawel Dembicki
2023-06-21 21:32   ` Linus Walleij
2023-06-22  7:41   ` Simon Horman
2023-06-21 19:13 ` [PATCH net-next 4/6] net: dsa: vsc73xx: Add bridge support Pawel Dembicki
2023-06-21 21:33   ` Linus Walleij
2023-06-21 19:13 ` [PATCH net-next 5/6] net: dsa: vsc73xx: Add vlan filtering Pawel Dembicki
2023-06-21 21:34   ` Linus Walleij
2023-06-21 19:13 ` [PATCH net-next 6/6] net: dsa: vsc73xx: fix MTU configuration Pawel Dembicki
2023-06-21 21:35   ` Linus Walleij
2023-06-22  7:35   ` Simon Horman
2023-06-21 21:21 ` [PATCH net-next 1/6] net: dsa: vsc73xx: convert to PHYLINK Linus Walleij
2023-06-22  7:34 ` Simon Horman
2023-06-22 11:55 ` Russell King (Oracle)
2023-06-24  4:02   ` Paweł Dembicki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230621191302.1405623-2-paweldembicki@gmail.com \
    --to=paweldembicki@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®