[PATCH 2/4] arm64: dts: imx8ulp: remove "fsl,imx7ulp-lpuart" compatible for i.MX8ULP

[Sherry Sun <sherry.sun@nxp.com>]

i.MX8ULP has specific "fsl,imx8ulp-lpuart" compatible in lpuart driver,
"fsl,imx7ulp-lpuart" compatible is no longer needed, and i.MX8ULP is not
fully compatible with i.MX7ULP, for example, i.MX8ulp can support
EOP(end-of-packet) function while i.MX7ulp doesn't, so remove
"fsl,imx7ulp-lpuart" compatible.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index 57627bdaa851..e900f5b25694 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -245,7 +245,7 @@
 			};
 
 			lpuart4: serial@29390000 {
-				compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx8ulp-lpuart";
 				reg = <0x29390000 0x1000>;
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&pcc3 IMX8ULP_CLK_LPUART4>;
@@ -254,7 +254,7 @@
 			};
 
 			lpuart5: serial@293a0000 {
-				compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx8ulp-lpuart";
 				reg = <0x293a0000 0x1000>;
 				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&pcc3 IMX8ULP_CLK_LPUART5>;
@@ -334,7 +334,7 @@
 			};
 
 			lpuart6: serial@29860000 {
-				compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx8ulp-lpuart";
 				reg = <0x29860000 0x1000>;
 				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&pcc4 IMX8ULP_CLK_LPUART6>;
@@ -343,7 +343,7 @@
 			};
 
 			lpuart7: serial@29870000 {
-				compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				compatible = "fsl,imx8ulp-lpuart";
 				reg = <0x29870000 0x1000>;
 				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&pcc4 IMX8ULP_CLK_LPUART7>;
-- 
2.17.1