mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Andreas Hindborg <nmi@metaspace.dk>
To: Ming Lei <ming.lei@redhat.com>
Cc: Hans Holmberg <Hans.Holmberg@wdc.com>,
	Aravind Ramesh <Aravind.Ramesh@wdc.com>,
	Jens Axboe <axboe@kernel.dk>,
	linux-block@vger.kernel.org (open list:BLOCK LAYER),
	Christoph Hellwig <hch@infradead.org>,
	Matias Bjorling <Matias.Bjorling@wdc.com>,
	Andreas Hindborg <a.hindborg@samsung.com>,
	linux-kernel@vger.kernel.org (open list),
	Damien Le Moal <dlemoal@kernel.org>,
	gost.dev@samsung.com, Minwoo Im <minwoo.im.dev@gmail.com>
Subject: [PATCH v4 3/4] ublk: enable zoned storage support
Date: Wed, 28 Jun 2023 21:06:48 +0200	[thread overview]
Message-ID: <20230628190649.11233-4-nmi@metaspace.dk> (raw)
In-Reply-To: <20230628190649.11233-1-nmi@metaspace.dk>

From: Andreas Hindborg <a.hindborg@samsung.com>

Add zoned storage support to ublk: report_zones and operations:
 - REQ_OP_ZONE_OPEN
 - REQ_OP_ZONE_CLOSE
 - REQ_OP_ZONE_FINISH
 - REQ_OP_ZONE_RESET

Note: This commit changes the ublk kernel module name from `ublk_drv.ko` to
`ublk.ko` in order to link multiple translation units into the module.

Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
---
 MAINTAINERS                    |   1 +
 drivers/block/Kconfig          |   4 +
 drivers/block/Makefile         |   4 +-
 drivers/block/ublk_drv-zoned.c | 144 +++++++++++++++++++++++++++++++++
 drivers/block/ublk_drv.c       |  64 +++++++++++++--
 drivers/block/ublk_drv.h       |  15 ++++
 include/uapi/linux/ublk_cmd.h  |  14 ++++
 7 files changed, 239 insertions(+), 7 deletions(-)
 create mode 100644 drivers/block/ublk_drv-zoned.c

diff --git a/MAINTAINERS b/MAINTAINERS
index ace71c90751c..db8a8deb5926 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -21555,6 +21555,7 @@ S:	Maintained
 F:	Documentation/block/ublk.rst
 F:	drivers/block/ublk_drv.c
 F:	drivers/block/ublk_drv.h
+F:	drivers/block/ublk_drv-zoned.c
 F:	include/uapi/linux/ublk_cmd.h
 
 UCLINUX (M68KNOMMU AND COLDFIRE)
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 5b9d4aaebb81..c58dfd035557 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -402,6 +402,10 @@ config BLKDEV_UBLK_LEGACY_OPCODES
 	  suggested to enable N if your application(ublk server) switches to
 	  ioctl command encoding.
 
+config BLK_DEV_UBLK_ZONED
+	def_bool y
+	depends on BLK_DEV_UBLK && BLK_DEV_ZONED
+
 source "drivers/block/rnbd/Kconfig"
 
 endif # BLK_DEV
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 101612cba303..bc1649e20ec2 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -37,6 +37,8 @@ obj-$(CONFIG_BLK_DEV_RNBD)	+= rnbd/
 
 obj-$(CONFIG_BLK_DEV_NULL_BLK)	+= null_blk/
 
-obj-$(CONFIG_BLK_DEV_UBLK)			+= ublk_drv.o
+obj-$(CONFIG_BLK_DEV_UBLK)		+= ublk.o
+ublk-$(CONFIG_BLK_DEV_UBLK)		+= ublk_drv.o
+ublk-$(CONFIG_BLK_DEV_UBLK_ZONED)	+= ublk_drv-zoned.o
 
 swim_mod-y	:= swim.o swim_asm.o
diff --git a/drivers/block/ublk_drv-zoned.c b/drivers/block/ublk_drv-zoned.c
new file mode 100644
index 000000000000..ea86bf4b3681
--- /dev/null
+++ b/drivers/block/ublk_drv-zoned.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2023 Andreas Hindborg <a.hindborg@samsung.com>
+ */
+#include <linux/blkzoned.h>
+#include <linux/ublk_cmd.h>
+#include <linux/vmalloc.h>
+
+#include "ublk_drv.h"
+
+void ublk_set_nr_zones(struct ublk_device *ub)
+{
+	const struct ublk_param_basic *p = &ub->params.basic;
+
+	if (ub->dev_info.flags & UBLK_F_ZONED && p->chunk_sectors)
+		ub->ub_disk->nr_zones = p->dev_sectors / p->chunk_sectors;
+}
+
+void ublk_dev_param_zoned_apply(struct ublk_device *ub)
+{
+	const struct ublk_param_zoned *p = &ub->params.zoned;
+
+	if (ub->dev_info.flags & UBLK_F_ZONED) {
+		disk_set_max_active_zones(ub->ub_disk, p->max_active_zones);
+		disk_set_max_open_zones(ub->ub_disk, p->max_open_zones);
+	}
+}
+
+int ublk_revalidate_disk_zones(struct gendisk *disk)
+{
+	return blk_revalidate_disk_zones(disk, NULL);
+}
+
+/* Based on virtblk_alloc_report_buffer */
+static void *ublk_alloc_report_buffer(struct ublk_device *ublk,
+				      unsigned int nr_zones,
+				      unsigned int zone_sectors, size_t *buflen)
+{
+	struct request_queue *q = ublk->ub_disk->queue;
+	size_t bufsize;
+	void *buf;
+
+	nr_zones = min_t(unsigned int, nr_zones,
+			 get_capacity(ublk->ub_disk) >> ilog2(zone_sectors));
+
+	bufsize = nr_zones * sizeof(struct blk_zone);
+	bufsize =
+		min_t(size_t, bufsize, queue_max_hw_sectors(q) << SECTOR_SHIFT);
+	bufsize = min_t(size_t, bufsize, queue_max_segments(q) << PAGE_SHIFT);
+
+	while (bufsize >= sizeof(struct blk_zone)) {
+		buf = __vmalloc(bufsize, GFP_KERNEL | __GFP_NORETRY);
+		if (buf) {
+			*buflen = bufsize;
+			return buf;
+		}
+		bufsize >>= 1;
+	}
+
+	bufsize = 0;
+	return NULL;
+}
+
+int ublk_report_zones(struct gendisk *disk, sector_t sector,
+		      unsigned int nr_zones, report_zones_cb cb, void *data)
+{
+	struct ublk_device *ub = disk->private_data;
+	unsigned int zone_size_sectors = disk->queue->limits.chunk_sectors;
+	unsigned int first_zone = sector >> ilog2(zone_size_sectors);
+	unsigned int done_zones = 0;
+	unsigned int max_zones_per_request;
+	struct blk_zone *buffer;
+	size_t buffer_length;
+
+	if (!(ub->dev_info.flags & UBLK_F_ZONED))
+		return -EOPNOTSUPP;
+
+	nr_zones = min_t(unsigned int, ub->ub_disk->nr_zones - first_zone,
+			 nr_zones);
+
+	buffer = ublk_alloc_report_buffer(ub, nr_zones, zone_size_sectors,
+					  &buffer_length);
+	if (!buffer)
+		return -ENOMEM;
+
+	max_zones_per_request = buffer_length / sizeof(struct blk_zone);
+
+	while (done_zones < nr_zones) {
+		unsigned int remaining_zones = nr_zones - done_zones;
+		unsigned int zones_in_request = min_t(
+			unsigned int, remaining_zones, max_zones_per_request);
+		int err = 0;
+		struct request *req;
+		struct ublk_rq_data *pdu;
+		blk_status_t status;
+
+		memset(buffer, 0, buffer_length);
+
+		req = blk_mq_alloc_request(disk->queue, REQ_OP_DRV_IN, 0);
+		if (IS_ERR(req))
+			return PTR_ERR(req);
+
+		pdu = blk_mq_rq_to_pdu(req);
+		pdu->operation = UBLK_IO_OP_REPORT_ZONES;
+		pdu->sector = sector;
+		pdu->nr_sectors = remaining_zones * zone_size_sectors;
+
+		err = blk_rq_map_kern(disk->queue, req, buffer, buffer_length,
+					GFP_KERNEL);
+		if (err) {
+			blk_mq_free_request(req);
+			kvfree(buffer);
+			return err;
+		}
+
+		status = blk_execute_rq(req, 0);
+		err = blk_status_to_errno(status);
+		blk_mq_free_request(req);
+		if (err) {
+			kvfree(buffer);
+			return err;
+		}
+
+		for (unsigned int i = 0; i < zones_in_request; i++) {
+			struct blk_zone *zone = buffer + i;
+
+			err = cb(zone, i, data);
+			if (err)
+				return err;
+
+			done_zones++;
+			sector += zone_size_sectors;
+
+			/* A zero length zone means don't ask for more zones */
+			if (!zone->len) {
+				kvfree(buffer);
+				return done_zones;
+			}
+		}
+	}
+
+	kvfree(buffer);
+	return done_zones;
+}
diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index e519dc0d9fe7..88fa39853c61 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -57,12 +57,13 @@
 		| UBLK_F_USER_RECOVERY_REISSUE \
 		| UBLK_F_UNPRIVILEGED_DEV \
 		| UBLK_F_CMD_IOCTL_ENCODE \
-		| UBLK_F_USER_COPY)
+		| UBLK_F_USER_COPY \
+		| UBLK_F_ZONED)
 
 /* All UBLK_PARAM_TYPE_* should be included here */
-#define UBLK_PARAM_TYPE_ALL (UBLK_PARAM_TYPE_BASIC | \
-		UBLK_PARAM_TYPE_DISCARD | UBLK_PARAM_TYPE_DEVT)
-
+#define UBLK_PARAM_TYPE_ALL                                \
+	(UBLK_PARAM_TYPE_BASIC | UBLK_PARAM_TYPE_DISCARD | \
+	 UBLK_PARAM_TYPE_DEVT | UBLK_PARAM_TYPE_ZONED)
 
 struct ublk_uring_cmd_pdu {
 	struct ublk_queue *ubq;
@@ -209,6 +210,9 @@ static void ublk_dev_param_basic_apply(struct ublk_device *ub)
 		set_disk_ro(ub->ub_disk, true);
 
 	set_capacity(ub->ub_disk, p->dev_sectors);
+
+	if (IS_ENABLED(CONFIG_BLK_DEV_ZONED))
+		ublk_set_nr_zones(ub);
 }
 
 static void ublk_dev_param_discard_apply(struct ublk_device *ub)
@@ -269,6 +273,9 @@ static int ublk_apply_params(struct ublk_device *ub)
 	if (ub->params.types & UBLK_PARAM_TYPE_DISCARD)
 		ublk_dev_param_discard_apply(ub);
 
+	if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) && (ub->params.types & UBLK_PARAM_TYPE_ZONED))
+		ublk_dev_param_zoned_apply(ub);
+
 	return 0;
 }
 
@@ -439,6 +446,7 @@ static const struct block_device_operations ub_fops = {
 	.owner =	THIS_MODULE,
 	.open =		ublk_open,
 	.free_disk =	ublk_free_disk,
+	.report_zones =	ublk_report_zones,
 };
 
 #define UBLK_MAX_PIN_PAGES	32
@@ -553,7 +561,8 @@ static inline bool ublk_need_map_req(const struct request *req)
 
 static inline bool ublk_need_unmap_req(const struct request *req)
 {
-	return ublk_rq_has_data(req) && req_op(req) == REQ_OP_READ;
+	return ublk_rq_has_data(req) &&
+	       (req_op(req) == REQ_OP_READ || req_op(req) == REQ_OP_DRV_IN);
 }
 
 static int ublk_map_io(const struct ublk_queue *ubq, const struct request *req,
@@ -637,6 +646,7 @@ static blk_status_t ublk_setup_iod(struct ublk_queue *ubq, struct request *req)
 {
 	struct ublksrv_io_desc *iod = ublk_get_iod(ubq, req->tag);
 	struct ublk_io *io = &ubq->ios[req->tag];
+	struct ublk_rq_data *pdu = blk_mq_rq_to_pdu(req);
 	u32 ublk_op;
 
 	switch (req_op(req)) {
@@ -655,6 +665,35 @@ static blk_status_t ublk_setup_iod(struct ublk_queue *ubq, struct request *req)
 	case REQ_OP_WRITE_ZEROES:
 		ublk_op = UBLK_IO_OP_WRITE_ZEROES;
 		break;
+	case REQ_OP_ZONE_OPEN:
+		ublk_op = UBLK_IO_OP_ZONE_OPEN;
+		break;
+	case REQ_OP_ZONE_CLOSE:
+		ublk_op = UBLK_IO_OP_ZONE_CLOSE;
+		break;
+	case REQ_OP_ZONE_FINISH:
+		ublk_op = UBLK_IO_OP_ZONE_FINISH;
+		break;
+	case REQ_OP_ZONE_RESET:
+		ublk_op = UBLK_IO_OP_ZONE_RESET;
+		break;
+	case REQ_OP_DRV_IN:
+		ublk_op = pdu->operation;
+		switch (ublk_op) {
+		case UBLK_IO_OP_REPORT_ZONES:
+			iod->op_flags = ublk_op | ublk_req_build_flags(req);
+			iod->nr_sectors = pdu->nr_sectors;
+			iod->start_sector = pdu->sector;
+			iod->addr = io->addr;
+			return BLK_STS_OK;
+		default:
+			return BLK_STS_IOERR;
+		}
+	case REQ_OP_ZONE_APPEND:
+	case REQ_OP_ZONE_RESET_ALL:
+	case REQ_OP_DRV_OUT:
+		/* We do not support zone append or reset_all yet */
+		fallthrough;
 	default:
 		return BLK_STS_IOERR;
 	}
@@ -708,7 +747,8 @@ static inline void __ublk_complete_rq(struct request *req)
 	 *
 	 * Both the two needn't unmap.
 	 */
-	if (req_op(req) != REQ_OP_READ && req_op(req) != REQ_OP_WRITE)
+	if (req_op(req) != REQ_OP_READ && req_op(req) != REQ_OP_WRITE &&
+	    req_op(req) != REQ_OP_DRV_IN)
 		goto exit;
 
 	/* for READ request, writing data in iod->addr to rq buffers */
@@ -1835,6 +1875,15 @@ static int ublk_ctrl_start_dev(struct ublk_device *ub, struct io_uring_cmd *cmd)
 	if (ub->nr_privileged_daemon != ub->nr_queues_ready)
 		set_bit(GD_SUPPRESS_PART_SCAN, &disk->state);
 
+	if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
+	    ub->dev_info.flags & UBLK_F_ZONED) {
+		disk_set_zoned(disk, BLK_ZONED_HM);
+		blk_queue_required_elevator_features(disk->queue, ELEVATOR_F_ZBD_SEQ_WRITE);
+		ret = ublk_revalidate_disk_zones(disk);
+		if (ret)
+			goto out_put_disk;
+	}
+
 	get_device(&ub->cdev_dev);
 	ub->dev_info.state = UBLK_S_DEV_LIVE;
 	ret = add_disk(disk);
@@ -1997,6 +2046,9 @@ static int ublk_ctrl_add_dev(struct io_uring_cmd *cmd)
 	if (ub->dev_info.flags & UBLK_F_USER_COPY)
 		ub->dev_info.flags &= ~UBLK_F_NEED_GET_DATA;
 
+	if (!IS_ENABLED(CONFIG_BLK_DEV_ZONED))
+		ub->dev_info.flags &= ~UBLK_F_ZONED;
+
 	/* We are not ready to support zero copy */
 	ub->dev_info.flags &= ~UBLK_F_SUPPORT_ZERO_COPY;
 
diff --git a/drivers/block/ublk_drv.h b/drivers/block/ublk_drv.h
index f81e62256456..7242430fd6b9 100644
--- a/drivers/block/ublk_drv.h
+++ b/drivers/block/ublk_drv.h
@@ -50,6 +50,21 @@ struct ublk_rq_data {
 	struct llist_node node;
 
 	struct kref ref;
+	enum ublk_op operation;
+	__u64 sector;
+	__u32 nr_sectors;
 };
 
+void ublk_set_nr_zones(struct ublk_device *ub);
+void ublk_dev_param_zoned_apply(struct ublk_device *ub);
+int ublk_revalidate_disk_zones(struct gendisk *disk);
+
+#ifdef CONFIG_BLK_DEV_UBLK_ZONED
+int ublk_report_zones(struct gendisk *disk, sector_t sector,
+		      unsigned int nr_zones, report_zones_cb cb,
+		      void *data);
+#else
+#define ublk_report_zones NULL
+#endif
+
 #endif
diff --git a/include/uapi/linux/ublk_cmd.h b/include/uapi/linux/ublk_cmd.h
index 471b3b983045..436525afffe8 100644
--- a/include/uapi/linux/ublk_cmd.h
+++ b/include/uapi/linux/ublk_cmd.h
@@ -176,6 +176,11 @@
 /* Copy between request and user buffer by pread()/pwrite() */
 #define UBLK_F_USER_COPY	(1UL << 7)
 
+/*
+ * Enable zoned device support
+ */
+#define UBLK_F_ZONED (1ULL << 8)
+
 /* device state */
 #define UBLK_S_DEV_DEAD	0
 #define UBLK_S_DEV_LIVE	1
@@ -242,6 +247,7 @@ enum ublk_op {
 	UBLK_IO_OP_ZONE_APPEND = 13,
 	UBLK_IO_OP_ZONE_RESET = 15,
 	__UBLK_IO_OP_DRV_IN_START = 32,
+	UBLK_IO_OP_REPORT_ZONES = __UBLK_IO_OP_DRV_IN_START,
 	__UBLK_IO_OP_DRV_IN_END = 96,
 	__UBLK_IO_OP_DRV_OUT_START = __UBLK_IO_OP_DRV_IN_END,
 	__UBLK_IO_OP_DRV_OUT_END = 160,
@@ -342,6 +348,12 @@ struct ublk_param_devt {
 	__u32   disk_minor;
 };
 
+struct ublk_param_zoned {
+	__u32	max_open_zones;
+	__u32	max_active_zones;
+	__u8	reserved[24];
+};
+
 struct ublk_params {
 	/*
 	 * Total length of parameters, userspace has to set 'len' for both
@@ -353,11 +365,13 @@ struct ublk_params {
 #define UBLK_PARAM_TYPE_BASIC           (1 << 0)
 #define UBLK_PARAM_TYPE_DISCARD         (1 << 1)
 #define UBLK_PARAM_TYPE_DEVT            (1 << 2)
+#define UBLK_PARAM_TYPE_ZONED           (1 << 3)
 	__u32	types;			/* types of parameter included */
 
 	struct ublk_param_basic		basic;
 	struct ublk_param_discard	discard;
 	struct ublk_param_devt		devt;
+	struct ublk_param_zoned	zoned;
 };
 
 #endif
-- 
2.41.0


  parent reply	other threads:[~2023-06-28 19:07 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-28 19:06 [PATCH v4 0/4] ublk: add " Andreas Hindborg
2023-06-28 19:06 ` [PATCH v4 1/4] ublk: change ublk IO command defines to enum Andreas Hindborg
2023-06-28 22:47   ` Damien Le Moal
2023-06-29  0:38     ` Ming Lei
2023-06-29  1:14       ` Damien Le Moal
2023-06-29  7:09       ` Andreas Hindborg (Samsung)
2023-06-29  7:11     ` Andreas Hindborg (Samsung)
     [not found]   ` <83E5C27A-9AEF-4900-9652-78ACFF47E6B0@wdc.com>
2023-06-30 10:33     ` aravind.ramesh
2023-06-30 16:30       ` Andreas Hindborg (Samsung)
2023-06-28 19:06 ` [PATCH v4 2/4] ublk: move types to shared header file Andreas Hindborg
2023-06-28 22:49   ` Damien Le Moal
     [not found]   ` <6BEB9EA7-7445-498E-9492-21BC2B5D8B19@wdc.com>
2023-06-30 10:33     ` aravind.ramesh
2023-06-28 19:06 ` Andreas Hindborg [this message]
2023-06-28 23:16   ` [PATCH v4 3/4] ublk: enable zoned storage support Damien Le Moal
2023-06-29  7:50     ` Andreas Hindborg (Samsung)
2023-06-29  9:41       ` Damien Le Moal
2023-06-30 11:53         ` Andreas Hindborg (Samsung)
2023-06-29  2:39   ` Ming Lei
2023-06-30 16:51     ` Andreas Hindborg (Samsung)
2023-06-29  2:54   ` kernel test robot
2023-06-29  5:39   ` Christoph Hellwig
2023-06-29  7:25     ` Andreas Hindborg (Samsung)
2023-06-29  7:31       ` Christoph Hellwig
2023-06-29  7:22   ` kernel test robot
     [not found]   ` <62426D68-1E01-4804-9CFC-A1146770F362@wdc.com>
2023-06-30 10:34     ` aravind.ramesh
2023-06-30 16:37       ` Andreas Hindborg (Samsung)
2023-06-28 19:06 ` [PATCH v4 4/4] ublk: add zone append Andreas Hindborg
2023-06-28 23:17   ` Damien Le Moal
2023-06-29  2:46   ` Ming Lei
2023-06-29  9:17     ` Andreas Hindborg (Samsung)
2023-06-29  9:43       ` Damien Le Moal
     [not found]   ` <39701CAF-7AE2-4C83-A4DD-929A0A4FB8F0@wdc.com>
2023-06-30 10:35     ` aravind.ramesh
2023-06-30 16:33       ` Andreas Hindborg (Samsung)
     [not found] ` <5F597343-EC91-4698-ACBE-9111B52FC3FC@wdc.com>
2023-06-30 10:33   ` [PATCH v4 0/4] ublk: add zoned storage support aravind.ramesh
2023-06-30 14:26     ` Andreas Hindborg (Samsung)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230628190649.11233-4-nmi@metaspace.dk \
    --to=nmi@metaspace.dk \
    --cc=Aravind.Ramesh@wdc.com \
    --cc=Hans.Holmberg@wdc.com \
    --cc=Matias.Bjorling@wdc.com \
    --cc=a.hindborg@samsung.com \
    --cc=axboe@kernel.dk \
    --cc=dlemoal@kernel.org \
    --cc=gost.dev@samsung.com \
    --cc=hch@infradead.org \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ming.lei@redhat.com \
    --cc=minwoo.im.dev@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®